How it worksBuy individual items

NVPH materials · Maharashtra

Naturally Ventilated Polyhouse Materials Seller in Pulgaon

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

A naturally ventilated polyhouse (NVPH) needs no fans or pads: warm air leaves through the roof vent and fresh air comes in through roll-up side curtains. Whether that is enough depends on the weather, so this page works through Pulgaon's numbers — May afternoons of about 44°C, 1,013 mm of rain a year and humid air from July to October — and the NVPH material we would send for them.

Hottest month
May, ~44°C
Humid (75%+)
4 months
NVPH material, 1 acre
₹734/m²
Delivery
~3 days
Naturally ventilated polyhouse built with our material, like those we supply to Pulgaon
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Pulgaon?

In May the air is dry enough (25% humidity) for an NVPH to vent well, but afternoons of 44°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasurePulgaonMaharashtra average (130 towns)What it means for the NVPH
Hottest-month high44°C (May)40.7°C3.3°C hotter than the state average
Humidity in that month25%35%Dry in May, but humid from July to October
Rain a year1,013 mm1,176 mm163 mm less than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Pulgaon
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Pulgaon

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Pulgaon; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor PulgaonWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 6.9 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 44°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsAir Circulation Fan4 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepJuly brings ~296 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Mandi price seasons around Pulgaon

Across 7 mandis in Pulgaon district, 8 polyhouse and nethouse crops trade regularly. Okra (bhindi) has the most arrivals; Coriander (leaves) has the widest price swing (332%), peaking in October.

CropMarketsAverageHighest monthLowest monthSwing
Okra (bhindi)7₹3,066/qDec · ₹4,120Sep · ₹2,20187%
Tomato7₹1,629/qDec · ₹2,556Feb · ₹952168%
Cucumber7₹1,483/qJun · ₹1,941Mar · ₹1,03787%
Cauliflower7₹1,764/qNov · ₹2,374Mar · ₹1,036129%
Spinach7₹2,228/qJun · ₹3,254Jan · ₹1,040213%
Coriander (leaves)7₹2,782/qOct · ₹4,771Jan · ₹1,104332%
Brinjal7₹2,429/qNov · ₹3,656Mar · ₹1,191207%
Cabbage7₹1,078/qNov · ₹1,389Apr · ₹78377%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Pulgaon district. ₹ per quintal (100 kg).

When to plant in Pulgaon for the best prices

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, okra (bhindi) peaks in December; at about 45 days to first harvest, transplant in October.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
Okra (bhindi)Jan, Dec~45OctoberSep
TomatoJul, Dec~75SeptemberFeb
CucumberJun~40AprilMar
CauliflowerMay, Jun, Jul, Nov~75AugustMar
SpinachJun, Oct~30MayJan
Coriander (leaves)Jun, Jul, Oct~35AugustJan
BrinjalSep, Nov~60SeptemberMar
CabbageJun, Jul, Nov~75AugustApr
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Pulgaon month by month

May is the hottest month, with afternoons around 43.7°C; December nights drop to about 12.1°C. July is the wettest (296 mm of 1,013 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan29.5°C12.5°C41%12 mm4.61.7
Feb33.7°C16.2°C32%8 mm5.51.8
Mar37.9°C20.7°C27%19 mm6.21.9
Apr42.1°C25.6°C22%11 mm6.92.3
May43.7°C29°C25%16 mm73.6
Jun36.5°C26.5°C58%186 mm5.33.7
Jul30.9°C23.6°C80%296 mm4.13.5
Aug29.4°C22.9°C86%240 mm4.13
Sep29.9°C22.4°C84%166 mm4.92
Oct30°C19.2°C75%46 mm5.21.4
Nov29.1°C15.2°C67%11 mm4.81.4
Dec28.6°C12.1°C53%2 mm4.51.5
NASA POWER long-term monthly averages for Pulgaon (20.72, 78.32).

NVPH material list: 52 × 76 m in Pulgaon

A 52 m wide, 76 m long naturally ventilated polyhouse (3,952 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureBig Bottom (60X2.0X8000)102 nos2,546 kg
GI structureSmall Column (76X2.0X4500)133 nos2,250 kg
GI structureGutter Purlin (42X2.0X4000)170 nos1,414 kg
GI structureGI Gutter Sheet375 mtr—
GI structureBig Arc (42X2.0X5200)114 nos1,233 kg
GI structureSide Hockey (60X2.0X5500)64 nos1,098 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)722 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)501 mtr—
Film & netsSide Insect Net (5.2 m)258 mtr—
Film & netsWhite Shade Net 50%864 mtr—
Film & netsSide Skirting Apron (1.5 m)258 mtr—
Fittings & accessoriesAluminium Profile2,592 mtr—
Fittings & accessoriesF Bracket228 nos—
Fittings & accessoriesGI Spring4,425 mtr—
Fittings & accessoriesSelf Drilling Screw5,832 nos—
Fittings & accessoriesNylon Rope 12 mm (200 m Bundle)11 nos—
Fittings & accessoriesT Joint (Tee)102 nos—
The largest items of a 52 × 76 m kit (68 items in all, about 16.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Pulgaon

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Pulgaon and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Pulgaon

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Pulgaon's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~44°C highs
Strongest sun6.9 kWh/m²/day
Wettest month~296 mm
Humid (75%+)July–October
Nethouse seasonOctober–February
NASA POWER monthly averages for Pulgaon.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 296 mm, the heaviest rain of the year.

  2. 2

    July to October

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 44°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Pulgaon

Coloured capsicum for Pulgaon

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 44°C.

Cucumber (parthenocarpic) for Pulgaon

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Pulgaon

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Pulgaon?

Pulgaon is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 44°C down to about 31°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~31°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in PulgaonCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Pulgaon

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

Pulgaon is roughly 720 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Pulgaon in about 3 days, carrying the invoice, the test reports and 100% invoice insurance.

Pulgaon within Maharashtra

Pulgaon is one of the hotter towns in Maharashtra (7th of 130 we cover), and in the middle for rain (56th). These are the larger towns we supply elsewhere in Maharashtra.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Pulgaon's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (44°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Pulgaon?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Pulgaon take?

About 720 km by road from our Satara factory, so usually in about 3 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Pulgaon?

We recommend it: 4 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

NVPH materials near Pulgaon

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom PulgaonHottest monthHumid monthsSuits
NVPH materials in Arvi~40 kmMay, 44°C3NVPH + fan & pad
NVPH materials in Wardha~40 kmMay, 44°C4NVPH + fan & pad
NVPH materials in Yavatmal~50 kmMay, 44°C4NVPH + fan & pad
NVPH materials in Wadgaon Road~60 kmMay, 44°C4NVPH + fan & pad
NVPH materials in Amravati~80 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Morshi~100 kmMay, 43°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Pulgaon
  2. Kryzen: Polyhouse farming in Pulgaon
  3. NASA POWER monthly climate averages for Pulgaon
  4. NHB cost norms for protected cultivation
Build your kit