How it worksBuy individual items

NVPH materials · Thane district, Maharashtra

Naturally ventilated polyhouse material for Thane farms

By Editorial Team, Kryzen Biotech · Updated 13 November 2026

A naturally ventilated polyhouse can work in Thane, but it needs active curtain and shade management through the April heat and a strong humidity-and-rain plan from June to October. Thane receives 2,509 mm rain a year, with July alone averaging 834 mm, so drainage, insect exclusion and moving air matter as much as the GI structure.

Hottest month
April, ~38°C
Humid (75%+)
5 months
NVPH material, 1 acre
₹734/m²
Delivery
Next day
Naturally ventilated polyhouse built with our material, like those we supply to Thane
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does natural ventilation work in Thane?

Yes, for crops that can work with a naturally ventilated environment rather than fixed temperature control. April is the testing month: the average afternoon high reaches 38.4°C and sun is 7.1 kWh/m²/day. Fully opened side curtains, a roof vent and reflective shade help release heat, but an NVPH does not provide the same summer control as a fan-and-pad house.

The monsoon is the other operating limit. Humidity is high from June to October, rising to 90% in July and August. Outside temperatures are lower in those months, but humid air does not dry foliage quickly. Keep rain out while allowing airflow whenever conditions permit, and use circulation fans as an added measure. January nights can reach 15.4°C; this is cool but not the main climate challenge here.

Thane is cooler than the Maharashtra average in its hottest month, but it is among the wetter locations: annual rain is 1,333 mm above the listed state average. That combination makes a well-managed NVPH a practical choice for many protected crops, while very tight summer temperature control points towards fan and pad.

  • April: 38.4°C average high and the strongest sun.
  • June–October: the humid operating period; July is wettest at 834 mm.
  • January: 31°C average high and 15.4°C average low.
MeasureThaneMaharashtra average (130 towns)What it means for the NVPH
Hottest-month high38°C (April)40.7°C2.7°C cooler than the state average
Humidity in that month53%35%Dry in April, but humid from June to October
Rain a year2,509 mm1,176 mm1,333 mm more than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Thane
Cool air enters through the side curtains; warm air leaves through the roof vent.

Run curtains, vents and shade through the year

January and February are the clearest, driest working months. Open the house for maximum light during the day, while using curtains sensibly during the cooler nights. February has only 2 mm average rain and 44% humidity, but its average high is already 33.8°C. March climbs to 36.8°C, so begin opening side curtains early and prepare shade before peak heat.

In April, roll side curtains fully up and keep the roof vent unobstructed. Close the shade layer over the crop during the high-sun period, and irrigate early in the day. May remains hot at 37°C, with humidity increasing to 60%; continue maximum natural airflow and inspect the house before monsoon starts.

From June through October, manage for dryness rather than maximum cooling. June receives 535 mm rain, followed by 834 mm in July, 606 mm in August and 376 mm in September. Open side curtains whenever it is not raining, run air-circulation fans in the mornings, and keep plant spacing a little wider to reduce fungal disease. Clean gutters and funnels before June, check film tears and tighten GI springs before the heaviest rain. October is still humid at 78%, even though rain falls to 104 mm.

In November and December, rain reduces to 17 mm and 5 mm respectively. Reopen for light and plan the main planting cycle. November–February is also listed as the nethouse season in Thane, making it a useful maintenance and crop-planning window.

  • Do not leave curtains shut all monsoon merely to block rain; use open periods for air exchange.
  • Use the shade layer most actively in April and May, then adjust it to crop light needs.
  • Inspect roof film, gutters, springs and drainage before June rather than during July rain.
MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan31°C15.4°C51%0 mm4.92
Feb33.8°C17.6°C44%2 mm5.72.1
Mar36.8°C20.6°C45%5 mm6.62.2
Apr38.4°C23.1°C53%3 mm7.12.3
May37°C25.4°C60%22 mm7.12.9
Jun31.5°C25.8°C80%535 mm53.7
Jul28.4°C24.9°C90%834 mm3.84
Aug27.9°C24.2°C90%606 mm43.5
Sep28.8°C23.6°C89%376 mm4.82.3
Oct30.8°C21.6°C78%104 mm5.21.8
Nov30.6°C18.6°C69%17 mm4.82
Dec30.3°C16.3°C60%5 mm4.52
NASA POWER long-term monthly averages for Thane.

Material changes that suit heavy rain and humidity

The base NVPH approach uses a 250-micron white diffused, UV-stabilised polyfilm, roof vent, side curtains, insect net and GI gutter arrangement. For Thane, retain the white diffused roof film: it spreads April’s strong sunlight. Retain GI gutter sheet and funnels too, but make gutter cleaning a pre-monsoon routine.

For heat, an aluminium shade net is the recommended substitution for the standard white 50% shade net because it reflects heat outward at April temperatures. Add a second shade-net layer on ropes and pulleys so it can be opened or closed by season rather than remaining fixed over the crop.

The five humid months justify an air-circulation fan as an upgrade alongside roof and side ventilation. Use aluminium doors rather than FRP doors for the heavy-rain conditions, and include an entry cabin with double doors where insect exclusion is important. Side insect net and the entry arrangement help reduce whitefly and thrips entering when people move in and out.

  • Keep: 250-micron white diffused roof film and GI gutter sheet with funnels.
  • Add: aluminium shade net, a seasonally operated second net layer and air-circulation fans.
  • Choose: aluminium doors and an entry cabin for rain resilience and insect exclusion.
PartStandard kitFor ThaneWhy
Roof film250-micron white diffused polyfilmKeepSpreads April's 7.1 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 38°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsAir Circulation Fan5 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsAluminium DoorHeavy rain: aluminium does not warp or swell
GuttersGI gutter sheet + funnelsKeepJuly brings ~834 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What is in the NVPH material kit

Polyhouse Constructions supplies complete material kits from its Degaon, Satara factory: GI structure, film, nets, fittings and accessories. The live kit builder at polyhouseconstructions.com shows every line, quantity, weight and the current week’s rate for the selected span and bay. Individual items are also available.

As an indication of what a properly itemised kit contains, the 28 × 36 m kit has 67 items and about 4.8 tonnes of steel and fittings. Its larger listed lines include 36 small columns, 32 side hockey members, 21 big-bottom members, 27 big arcs and 70 m of GI gutter sheet. It also includes 255 m of 4.5 m white diffused polyfilm, 138 m of 5.5 m film, 130 m of side insect net and 130 m of skirting apron.

The same list includes 836 m of aluminium profile, 1,425 m of GI spring, 54 F brackets, 358 half clamps and 1,881 self-drilling screws. A Thane-specific upgrade such as aluminium shade net or a circulation fan should be finalised in the selected kit rather than assumed to be in the base material list.

  • GI pipes use ISI-marked branded steel from Tata, Jindal and JSW.
  • Structure warranty: 15 years; polyfilm: 2.5 years; nets: 3 years.
  • Every dispatch includes lab test certificates and technical data sheets for products.
GroupItemQuantityWeight
GI structureSmall Column (76X2.0X4500)36 nos609 kg
GI structureSide Hockey (60X2.0X5500)32 nos549 kg
GI structureBig Bottom (60X2.0X8000)21 nos524 kg
GI structureBig Arc (42X2.0X5200)27 nos292 kg
GI structureGI Gutter Sheet70 mtr—
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)255 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)138 mtr—
Film & netsSide Insect Net (5.2 m)130 mtr—
Film & netsSide Skirting Apron (1.5 m)130 mtr—
Film & netsWhite Shade Net 50%192 mtr—
Fittings & accessoriesAluminium Profile836 mtr—
Fittings & accessoriesGI Spring1,425 mtr—
Fittings & accessoriesF Bracket54 nos—
Fittings & accessoriesClamps 60 mm Half358 nos—
Fittings & accessoriesSelf Drilling Screw1,881 nos—
The largest items of a 28 × 36 m kit (67 items in all, about 4.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

Current material prices and what they include

This week’s ex-factory material price for a 20 × 24 m, 480 m² NVPH kit is ₹4,68,814, or ₹977/m² including GST. A 28 × 36 m, 1,008 m² kit is ₹8,59,963, or ₹853/m². The listed approximately one-acre 52 × 76 m, 3,952 m² kit is ₹28,99,897, or ₹734/m².

These are material-only prices. Freight to Thane and erection are extra, and prices change with weekly GI and plastic rates, updated every Friday. The lower per-m² amount at larger sizes reflects end frames, doors and gutters being shared across more covered area. Confirm the live price after choosing the exact size and Thane climate additions.

Material dispatch from the Satara factory is followed by delivery to Thane in 1 day after dispatch. Polyhouse Constructions is the manufacturer and does not have a Thane office; construction or erection is done by Kryzen Biotech’s construction team. Booking is with 5% advance and 95% before dispatch.

  • 20 × 24 m: ₹4,68,814 including GST, material only.
  • 28 × 36 m: ₹8,59,963 including GST, material only.
  • 52 × 76 m: ₹28,99,897 including GST, material only.
SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Thane and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Thane

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Crop choice: use the Thane mandi season, not price alone

Check the price season against the crop’s climate fit and your planting date; a high mandi month is not a promise of farm profit. The district data covers markets including APMC Kalyan, Kalyan APMC, Murbad and Shahapur. Capsicum is an NVPH candidate, but its district modal price averages ₹3,893/q and is highest in July at ₹6,111/q, when the house also faces 90% humidity and heavy rain. Plan airflow, plant health and picking access for that period instead of planting only for the price peak.

Cucumber is a short 3–4 month NVPH crop. Its average modal price is ₹2,202/q, highest in December at ₹2,732/q and lowest in February at ₹1,686/q. A cycle aimed at the November–December window can be evaluated against this seasonal pattern. Okra averages ₹3,376/q and peaks in December at ₹4,479/q; green peas have the highest listed average at ₹9,410/q and peak in November at ₹12,125/q.

For monsoon marketing, beans, ridge gourd, brinjal and green chilli all show their highest listed prices in July, while bitter gourd peaks in June. Those months also demand the strictest ventilation and disease-management discipline. Discuss crop duration, seed choice, harvest timing and buyer route before committing the entire area to one crop.

  • Capsicum: ₹3,893/q average; July high ₹6,111/q.
  • Cucumber: ₹2,202/q average; December high ₹2,732/q.
  • Green peas: ₹9,410/q average; November high ₹12,125/q.
CropMarketsAverage modal priceHighest monthLowest month
Okra (bhindi)8₹3,376/qDec (₹4,479)May (₹2,446)
Green peas3₹9,410/qNov (₹12,125)Mar (₹6,785)
Beans6₹4,475/qJul (₹6,932)Jan (₹2,290)
Bitter gourd8₹3,310/qJun (₹4,667)Oct (₹2,336)
Cucumber5₹2,202/qDec (₹2,732)Feb (₹1,686)
Ridge gourd5₹3,636/qJul (₹5,548)Oct (₹2,513)
Capsicum7₹3,893/qJul (₹6,111)Feb (₹2,614)
Green chilli4₹4,056/qJul (₹5,774)Sep (₹2,734)
Brinjal7₹2,949/qJul (₹4,493)Feb (₹2,087)
Bottle gourd6₹1,689/qJul (₹2,732)Apr (₹1,276)
Agmarknet daily prices via data.gov.in, last two years, markets in Thane district. ₹ per quintal.

NVPH or fan and pad for this site?

Choose an NVPH when the crop can tolerate seasonal variation and the priority is lower material and cooling running cost. Cooling is by roof vents and side curtains, so there is no electricity cost for cooling. It suits capsicum, cucumber, tomato and flowers in Thane, provided the April heat and June–October humidity are managed with shade, curtains, insect exclusion and circulation fans.

Choose fan and pad where a crop needs tighter summer conditions. In April, fan and pad is listed at about 32°C inside, compared with natural ventilation that follows outdoor conditions more closely. It is particularly suited to leafy greens and crops needing tight control in summer, but needs exhaust-fan and pump electricity.

At the listed one-acre material sizes, NVPH is ₹28,99,897 at ₹734/m² and fan and pad is ₹32,48,775 at ₹822/m². Compare more than the initial material figure: include power availability, cooling operating cost, crop sensitivity and the production risk you are prepared to manage during April and the monsoon.

  • NVPH cooling: roof vent and side curtains; no cooling power cost.
  • Fan and pad: exhaust fans and wet pads; about 32°C inside in April.
  • The listed one-acre fan-and-pad material price is ₹32,48,775.
Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~32°C inside in April
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in ThaneCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Ordering, engineering and construction support

Start by fixing the crop, covered area and whether the Thane upgrades are needed in the kit. Build the selected NVPH online to see the complete bill of materials. The engineering and manufacturing are in-house, with parts cut and drilled to drawing, a 32-point QA checklist and zero material mismatch through design-based counting.

Polyhouse Constructions is a venture of Kryzen Biotech Pvt Ltd and manufactures protected-cultivation structures and materials in India. The factory is at Degaon on the Pune–Bangalore Highway, Tal. Wai, Satara; the Experience Center is at Mahalunge, Pune. Kryzen Biotech’s team handles construction and erection, rather than a local Thane office.

For a larger purchase, a 5% bulk discount applies to 10 or more units of an item. If seeking assistance, confirm the current applicable horticulture norms with the state horticulture department before construction; subsidy norms can change.

  • Get the complete item list and current rate before booking.
  • Specify rain, shade and airflow upgrades at design stage.
  • Use Kryzen Biotech’s construction team for erection.
What you getPolyhouse ConstructionTypical local fabricator
Experience30 years of collective experience in greenhouse engineeringOften a small crew learning on the job
Technical know-howStrong technical understanding: structure planned for your climate and cropUsually repeats one standard design
Warranty15-year manufacturing warrantyRarely a written warranty
EngineeringIn-house engineering teamNo design or load checks
ManufacturingIn-house manufacturing, cut and drilled to drawingBuys pipes from traders, cuts on site
Quality checks32-point QA checklist for every partVisual check at best
Lab certificateLab test certificate with every dispatchNot provided
Technical sheetTechnical data sheet for every productNot available
Material matchZero material mismatch: every part counted per designShort or excess material is common
Raw materialBranded steel from Tata, Jindal and JSWUnbranded or mixed sources
PriceLowest cost across India, with real-time price benefits from weekly ratesFixed quote; rate drops are not passed on
BackingBacked by industry leader Kryzen BiotechSingle-owner workshop

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Can a naturally ventilated polyhouse handle Thane’s April heat?

It can be used with full side-curtain opening, an unobstructed roof vent and active shade management, but it will not hold a fixed cooled temperature. April averages 38.4°C with 7.1 kWh/m²/day sun; fan and pad is the tighter-control option and is listed at about 32°C inside in April.

What should I do in the Thane monsoon?

Clean gutters and funnels, inspect film and tighten GI springs before June. From June to October, open curtains whenever rain permits and run air-circulation fans in mornings, because humidity reaches 80% in June and 90% in July and August.

Which materials should be upgraded for Thane?

The Thane-specific recommendations are aluminium shade net, a second seasonally adjustable net layer, air-circulation fans, aluminium doors and an entry cabin. Keep the 250-micron white diffused film and GI gutters, while maintaining the gutters carefully before the rain.

What does a 28 × 36 m NVPH material kit cost?

This week’s listed price is ₹8,59,963 including GST for 1,008 m², or ₹853/m². It is an ex-factory material-only price; freight to Thane, erection and any selected climate upgrades are extra.

Which crop price months should I consider before planting?

District mandi data shows green peas highest in November at ₹12,125/q, cucumber highest in December at ₹2,732/q and capsicum highest in July at ₹6,111/q. Use these as market signals only, then match harvest timing to crop duration and the humidity risk of the monsoon.

NVPH materials near Thane

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom ThaneHottest monthHumid monthsSuits
NVPH materials in Bhiwandi~20 kmApr, 39°C5NVPH + fan & pad
NVPH materials in Kalyan-Dombivli~20 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Mira-Bhayandar~20 kmApr, 39°C5NVPH + fan & pad
NVPH materials in Mumbai~20 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Navi Mumbai~20 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Ambernath~30 kmApr, 38°C5NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Thane
  2. Kryzen: Polyhouse farming in Thane
  3. NASA POWER monthly climate averages for Thane
  4. NHB cost norms for protected cultivation
  5. Agmarknet daily prices (data.gov.in)
Build your kit