NVPH materials · Pune district, Maharashtra
Naturally Ventilated Polyhouse Material for Pune
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
A naturally ventilated polyhouse can suit Pune for much of the year, but its operation must change sharply between April’s dry 37.8°C heat and the wet, humid June–October period. For a Pune NVPH, prioritise openable side curtains and roof ventilation, rain-ready gutters, insect exclusion and extra air movement during monsoon humidity.
- Hottest month
- April, ~38°C
- Humid (75%+)
- 5 months
- NVPH material, 1 acre
- ₹734/m²
- Delivery
- Next day

Is natural ventilation enough in Pune?
Usually, yes for crops that can work with a naturally ventilated environment, provided the house is operated actively through the seasons. Pune’s April average afternoon high is 37.8°C, with strong sun at 7.1 kWh/m²/day. Natural airflow from side curtains and roof vents reduces trapped heat, but it cannot hold a tightly controlled temperature through the hottest afternoons.
The more demanding period is the monsoon. Pune receives about 1,730 mm of rain in a year, against a Maharashtra average of 1,176 mm. Humidity runs from 80% in June to 91% in August, while July alone averages 515 mm of rain. During this period, the aim is not maximum cooling; it is getting air through the crop whenever rain allows, keeping leaves dry and keeping drainage clear.
Winter is comparatively mild and dry. January has a 27.9°C average high, a 11.8°C average night low and only 1 mm rain. November to February is also identified as Pune’s nethouse season. This is a useful window for main planting, maximum light and maintenance.
- April is the heat-and-sun stress month: 37.8°C high and 7.1 kWh/m²/day sun.
- June to October is the humidity management period; humidity is 75% or more throughout this stretch.
- July is the rain-critical month: 515 mm average rain and 4.9 m/s average wind.
- January brings Pune’s coolest average night, 11.8°C.
| Measure | Pune | Maharashtra average (130 towns) | What it means for the NVPH |
|---|---|---|---|
| Hottest-month high | 38°C (April) | 40.7°C | 2.7°C cooler than the state average |
| Humidity in that month | 42% | 35% | Dry in April, but humid from June to October |
| Rain a year | 1,730 mm | 1,176 mm | 554 mm more than the state average |

Operate curtains, vents and shade month by month
From January through February, use the dry conditions and available light. The priority is ventilation and light rather than rain protection. February warms to a 31.4°C average high, so watch the crop and begin using shade before heat builds further.
March and April need the strongest heat response. March reaches 35.1°C and April 37.8°C. Roll side curtains fully up, use the roof vent, and close the shade net or a second net layer over the crop in April. Irrigate early in the day. May remains hot at 36.2°C, while rain rises to 26 mm and humidity to 57%, so retain a heat-management routine but be ready to protect the crop when showers start.
From June to October, open side curtains whenever it is not raining. Run air-circulation fans in the mornings during this humid period, and allow a little wider crop spacing to reduce fungal disease. Do not treat the curtain as permanently open in rain: use it to keep rain out while maintaining the maximum safe opening when conditions permit.
In November and December, rain drops to 22 mm and 4 mm respectively. Reopen for light and airflow, plan the main planting, and use the quieter period for structural checks. The calendar below is useful as a working reminder before the weather changes.
- Before July, clear gutters and funnels, check the polyfilm for tears and tighten GI springs.
- In April, use the 50% shade net or second layer during the strongest heat and sun.
- During June–October, manage humidity as carefully as temperature.
- Use November–February for light-demanding crop work and maintenance.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~38°C highs | ||||||||||||
| Strongest sun | 7.1 kWh/m²/day | ||||||||||||
| Wettest month | ~515 mm | ||||||||||||
| Humid (75%+) | June–October | ||||||||||||
| Nethouse season | November–February |
- 1
Before July
Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 515 mm, the heaviest rain of the year.
- 2
June to October
Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.
- 3
April
Peak heat, about 38°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.
- 4
November to February
The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.
Material changes that make sense for Pune
The base roof covering is 250-micron white diffused polyfilm. It spreads the strong April sunlight more evenly. For heat management, choose aluminium reflective shade net rather than treating shade as an optional afterthought; it reflects heat back out at Pune’s roughly 38°C April peak.
A second net layer, operated with ropes and pulleys, is a practical addition because it can be opened or closed by season. Roof ventilation and curtains remain the basic natural-airflow system, but an air-circulation fan is a worthwhile upgrade for Pune’s five humid months. Its role is leaf-drying air movement in the crop, not pad cooling.
Keep the GI gutter sheet and funnels, and clean them before June. For entries, an aluminium door is the rain-tolerant option because it does not warp or swell in heavy rain. An entry cabin is also worth including where frequent worker movement could bring in whitefly and thrips.
- Keep: 250-micron white diffused roof film and GI gutter sheet with funnels.
- Add: aluminium shade net, a second movable net layer and air-circulation fans.
- Consider: aluminium door and a double-door entry cabin for insect exclusion.
| Part | Standard kit | For Pune | Why |
|---|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Keep | Spreads April's 7.1 kWh/m²/day of sunlight evenly |
| Shade net | White 50% | Aluminium Shade Net (4 m) | Reflects heat back out at 38°C |
| Second net layer | None | Add (double layer) | Open or close it by the season with ropes and pulleys |
| Air circulation | Roof vent + curtains | Air Circulation Fan | 5 humid months: moving air keeps leaves dry |
| Doors | FRP (fibre) doors | Aluminium Door | Heavy rain: aluminium does not warp or swell |
| Gutters | GI gutter sheet + funnels | Keep | July brings ~515 mm; clean before June |
| Entry cabin | Optional | Include | A double door keeps whitefly and thrips out when people walk in |
What is in a complete NVPH material kit?
Polyhouse Constructions supplies complete material kits from its Degaon, on the Pune–Bangalore Highway, factory at Wai, Satara. A kit combines the GI structure, polyfilm, nets and fittings; individual items are also available. Kryzen Biotech’s construction team carries out erection, rather than an assumed Pune town office.
For scale, the 52 × 76 m kit contains 68 items and about 16.8 tonnes of steel and fittings. Its larger listed components include 102 Big Bottom members, 133 Small Columns, 170 Gutter Purlins, 114 Big Arcs, 64 Side Hockey members and 375 m of GI gutter sheet. It also includes 250-micron white diffused film in 4.5 m and 5.5 m widths, side insect net, white 50% shade net, skirting apron, aluminium profile, springs, screws, rope and T-joints.
The exact quantities should be designed to the selected span and bay, not copied from a different size. Build the kit online to see the complete line-by-line quantity, weight and weekly rate for the required Pune size. GI structure steel is ISI-marked branded material from Tata, Jindal and JSW.
- GI structure warranty: 15 years.
- Polyfilm warranty: 2.5 years; nets warranty: 3 years.
- Every dispatch includes a lab test certificate and technical data sheet.
| Group | Item | Quantity | Weight |
|---|---|---|---|
| GI structure | Big Bottom (60X2.0X8000) | 102 nos | 2,546 kg |
| GI structure | Small Column (76X2.0X4500) | 133 nos | 2,250 kg |
| GI structure | Gutter Purlin (42X2.0X4000) | 170 nos | 1,414 kg |
| GI structure | GI Gutter Sheet | 375 mtr | — |
| GI structure | Big Arc (42X2.0X5200) | 114 nos | 1,233 kg |
| GI structure | Side Hockey (60X2.0X5500) | 64 nos | 1,098 kg |
| Film & nets | Polyfilm White Diffused 250 Micron (4.5 m) | 722 mtr | — |
| Film & nets | Polyfilm White Diffused 250 Micron (5.5 m) | 501 mtr | — |
| Film & nets | Side Insect Net (5.2 m) | 258 mtr | — |
| Film & nets | White Shade Net 50% | 864 mtr | — |
| Film & nets | Side Skirting Apron (1.5 m) | 258 mtr | — |
| Fittings & accessories | Aluminium Profile | 2,592 mtr | — |
| Fittings & accessories | F Bracket | 228 nos | — |
| Fittings & accessories | GI Spring | 4,425 mtr | — |
| Fittings & accessories | Self Drilling Screw | 5,832 nos | — |
| Fittings & accessories | Nylon Rope 12 mm (200 m Bundle) | 11 nos | — |
| Fittings & accessories | T Joint (Tee) | 102 nos | — |
This week’s material-only prices for Pune
The table below gives this week’s NVPH material rates, including GST and ex-factory. Freight to Pune and erection are extra. Since GI and plastic prices are updated every Friday, use these figures as the current kit reference rather than a fixed long-term quotation.
A 20 × 24 m small house, covering 480 m², is listed at ₹4,68,814 or ₹977/m². A 28 × 36 m, 1,008 m² medium house is ₹8,59,963 or ₹853/m². The 52 × 76 m option, about 1 acre at 3,952 m², is ₹28,99,897 or ₹734/m². The lower per-square-metre figure on the larger house comes because gutters, end frames and doors are shared across more area.
Booking is with 5% advance and 95% before dispatch. Material delivery to Pune is listed as 1 day after dispatch from the Satara factory. A 5% bulk discount applies on 10 or more units of an item.
- Small: 480 m² — ₹4,68,814.
- Medium: 1,008 m² — ₹8,59,963.
- About 1 acre: 3,952 m² — ₹28,99,897.
| Size | Span × bay | Area | Material incl. GST | Per m² |
|---|---|---|---|---|
| Small | 20 × 24 m | 480 m² | ₹4,68,814 | ₹977 |
| Medium | 28 × 36 m | 1,008 m² | ₹8,59,963 | ₹853 |
| About 1 acre | 52 × 76 m | 3,952 m² | ₹28,99,897 | ₹734 |
Price your own size for Pune
Choose span and bay and get the full list with quantities, weights and rates in a minute.
Crop planning around Pune mandi price seasons
Choose the crop first for its market and crop-management fit, then select the house and planting window. For an NVPH in Pune, cucumber, tomato, capsicum and flowers are the listed crop directions; cucumber is a fast 3–4 month crop, while capsicum needs careful shade management through April. The district price record below helps compare seasonal market timing for crops with available data.
Cucumber has an average modal price of ₹1,932/q across 31 markets, with its recorded high in June at ₹2,402/q and low in March at ₹1,573/q. Tomato averages ₹1,592/q across 27 markets, peaking in December at ₹2,354/q and reaching its low in March at ₹1,123/q. These price months are market observations, not a promise of future price or a planting prescription.
For other options, green chilli has the highest listed average modal price at ₹4,071/q, with a February high of ₹4,903/q. Okra averages ₹3,565/q and its high is ₹4,371/q in December. Brinjal’s recorded high is ₹3,655/q in November. In monsoon planning, remember that bitter gourd peaks in June at ₹3,988/q and bottle gourd in July at ₹2,061/q, when humidity and rain management inside the house are especially important.
- Check district market records for Pune(Manjri), Khed(Chakan), Pune(Pimpri), Pune(Moshi), APMC Pune and other listed markets.
- Use price season along with labour, plant protection, irrigation and your buyer plan.
- Do not base a crop decision only on one recorded high-price month.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Cabbage | 31 | ₹965/q | Nov (₹1,433) | Mar (₹600) |
| Cucumber | 31 | ₹1,932/q | Jun (₹2,402) | Mar (₹1,573) |
| Cauliflower | 31 | ₹1,326/q | Nov (₹1,791) | Mar (₹915) |
| Brinjal | 30 | ₹2,665/q | Nov (₹3,655) | Apr (₹1,828) |
| Bottle gourd | 29 | ₹1,782/q | Jul (₹2,061) | Mar (₹1,481) |
| Okra (bhindi) | 30 | ₹3,565/q | Dec (₹4,371) | Apr (₹2,797) |
| Green chilli | 30 | ₹4,071/q | Feb (₹4,903) | Sep (₹3,065) |
| Tomato | 27 | ₹1,592/q | Dec (₹2,354) | Mar (₹1,123) |
| Bitter gourd | 30 | ₹3,175/q | Jun (₹3,988) | Sep (₹2,551) |
| Coriander (leaves) | 24 | ₹463/q | May (₹741) | Aug (₹179) |
When fan and pad is the better Pune choice
An NVPH cools through roof vents and side curtains without power for cooling. It is the lower-material-cost route and is listed for capsicum, cucumber, tomato and flowers in Pune. Its limitation is April: ventilation and shade reduce heat load, but they do not provide controlled cooling.
A fan-and-pad house uses exhaust fans and wet pads and is expected to reach about 30°C inside in April. It has electricity use for fans and a pump, but is the stronger choice for leafy greens and crops needing tighter summer control. Material price for the about-one-acre comparison is ₹28,99,897 (₹734/m²) for NVPH versus ₹32,48,775 (₹822/m²) for fan and pad.
For a grower comfortable matching crop cycles to Pune weather and actively operating curtains and shade, NVPH is the practical starting point. For production that cannot accept April heat variation, assess fan and pad rather than expecting natural ventilation to do the same job.
- NVPH: no cooling power cost; roof vent and side curtains.
- Fan and pad: approximately 30°C inside in April, with fan and pump electricity.
- Pune’s monsoon still requires hygiene, drainage and humidity discipline in either structure.
| Naturally ventilated | Fan & pad | |
|---|---|---|
| Cooling | Roof vent and side curtains (no power) | Exhaust fans and wet pads, ~30°C inside in April |
| Running cost | None for cooling | Electricity for fans and a pump |
| Material price, 1 acre | ₹28,99,897 (₹734/m²) | ₹32,48,775 (₹822/m²) |
| Suits in Pune | Capsicum, cucumber, tomato, flowers | Leafy greens and crops needing tight control in summer |
Getting the structure specified and built
The structure should be engineered for the selected crop and Pune’s rain exposure, not selected only by area. Polyhouse Constructions provides in-house engineering and manufacturing, a 32-point QA checklist and cut-and-drilled material to drawing. The material is supplied from the Satara factory; Pune has an Experience Center at Mahalunge, while erection is handled by Kryzen Biotech’s construction team.
Pune growers comparing subsidies should verify the current route with the state horticulture department before work starts. The stated MIDH/NHM support is 50% of the cost norm up to 4,000 m² per beneficiary. For NHB commercial projects above 2,500 m², the stated credit-linked back-ended subsidy is 50% of project cost at admissible norms, capped at ₹56 lakh per project; In-Principle Approval is needed before starting.
- NHB tubular NVPH cost norm: ₹844/m².
- NHB fan-and-pad cost norm: ₹1,400/m².
- Confirm current norms and eligibility before placing an order or beginning work.
Subsidy for a project in Pune
Which scheme fits your size, a worked example and the steps to apply.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Can a naturally ventilated polyhouse handle Pune’s April heat?
It can be used with full side-curtain opening, roof ventilation and shade management, but April averages 37.8°C with 7.1 kWh/m²/day sun. For crops needing tight summer temperature control, fan and pad is the stronger option and is listed at about 30°C inside in April.
What should I do in the Pune monsoon?
June to October is humid, with July averaging 515 mm rain and 89% humidity. Clear gutters before July, open curtains whenever it is not raining, and run air-circulation fans in the mornings to move air through the crop.
How much does NVPH material cost for Pune?
This week’s material-only, ex-factory rate is ₹4,68,814 for 480 m², ₹8,59,963 for 1,008 m² and ₹28,99,897 for 3,952 m², including GST. Freight to Pune and erection are extra, and rates change weekly with GI and plastic prices.
Which crops can I consider in a Pune NVPH?
The listed NVPH directions are capsicum, cucumber, tomato and flowers. District mandi records show cucumber’s highest recorded month was June at ₹2,402/q, while tomato’s was December at ₹2,354/q; market records should not be treated as guaranteed future prices.
Who constructs the polyhouse in Pune?
Polyhouse Constructions manufactures and supplies the material kit from its Satara factory. Construction and erection are done by Kryzen Biotech’s construction team; the company does not state that it has a town office in Pune.
NVPH materials near Pune
Neighbouring towns on the same delivery route, and how their summers compare.
| Town | From Pune | Hottest month | Humid months | Suits |
|---|---|---|---|---|
| NVPH materials in Pimpri-Chinchwad | ~20 km | Apr, 38°C | 5 | NVPH + fan & pad |
| NVPH materials in Sasvad | ~40 km | Apr, 38°C | 5 | NVPH + fan & pad |
| NVPH materials in Talegaon Dabhade | ~40 km | Apr, 38°C | 5 | NVPH + fan & pad |
| NVPH materials in Lonavla | ~70 km | Apr, 35°C | 5 | NVPH + fan & pad |
| NVPH materials in Shirur | ~80 km | Apr, 39°C | 3 | NVPH + fan & pad |
| NVPH materials in Wai | ~80 km | Apr, 38°C | 5 | NVPH + fan & pad |
