How it worksBuy individual items

Specifications glossary

Technical terms that you need to know

By Editorial Team, Kryzen Biotech

New to polyhouses? Our specifications and quotations use some technical words. Here is what each one means, in plain language, so you can compare products and quotes with confidence.

01Aluminium profile
An aluminium channel fixed along the frame. The polyfilm or net is laid in the channel and locked with zig-zag spring wire.
02Anti-drip
An additive that makes condensed water spread into a thin layer and run down the film, instead of forming drops that fall on the crop and spread disease.
03Anti-fog
An additive that stops mist forming on the inside of the film, so the film stays clear and lets in more light on cool, humid mornings.
04Apron / skirting
A strip of plastic-coated fabric along the bottom of the side walls, buried in the soil. It seals the gap at ground level against insects, water and wind.
05Bay
The distance between two rows of arches along the length of the polyhouse. Our bays are 4 m.
06Blow moulded film(Blown film)
Molten plastic is pushed through a ring-shaped die and blown into a large tube, then cooled and slit into sheets. The process stretches the film in both directions, so it is equally strong across its length and width.
07Brass
An alloy of copper and zinc that resists rust and wear. The gear unit that rolls the side curtains up and down has a brass body with a GI gear inside.
08Cellulose cooling pad
A block of corrugated paper sheets used in fan and pad polyhouses. Water runs down the pad and air pulled through it is cooled as the water evaporates. 150 mm thick pads are common.
09Diffused film
Film that scatters sunlight instead of letting it pass straight through. Light reaches lower leaves too, shadows are softer and leaves are less likely to scorch.
10ERW / longitudinal welded(Electric resistance welded)
How the pipe is made. A flat steel strip is rolled into a tube and its two edges are joined by electric current along the full length, leaving one straight weld seam. ERW pipes are uniform in size and wall thickness, which is why they are the standard for greenhouse frames.

Page 1 of 5 · 42 terms

See these specifications on every product

Browse products →
Build your kit