Fan & Pad Polyhouse guide
Fan and pad vs NVPH
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
Both use the same GI structure and film. The difference is the cooling: fan and pad adds a fan wall, pad wall, pumps and controls, and closes the roof vents.
Side by side
| Point | Fan and pad | NVPH |
|---|---|---|
| Climate control | Active cooling, tight control | Natural ventilation, shade, optional foggers |
| Rain and cold | Fully protected | Protected |
| Electricity | Highest | Low |
| Build cost | Highest | Medium |
| Best for | Roses, gerbera, orchids, hot dry regions | Coloured capsicum, cucumber, tomato, flowers |


An NVPH may be enough when
Crop
You grow coloured capsicum, cucumber or tomato in a moderate climate.
Humidity
Your area is humid most of the year, where pads cool less.
Power
Supply is unreliable or expensive.
Budget
You want the lower build and running cost of natural ventilation.
Terms used on this page
- Fan and pad polyhouse
- A closed polyhouse cooled by exhaust fans and wet cellulose pads. It works best in hot, dry weather, where evaporation can bring the inside several degrees below the outside.
- NVPH
- A polyhouse that is cooled by air moving through roof vents and roll-up side curtains, without fans. It has the lowest running cost and suits most crops and climates.
Get fan & pad material from India's biggest CEA manufacturing company
Choose your size and see every item, quantity and weekly rate before you pay.
FAQs
Can I add fan and pad to an NVPH later?
It needs a closed house and walls designed for fans and pads, so it is easier to plan it from the start.
