How it worksBuy individual items

Equipment · New Delhi district, Delhi

Protected cultivation equipment for New Delhi farms

By Editorial Team, Kryzen Biotech · Updated 13 November 2026

New Delhi needs protected-cultivation equipment that can handle a very dry, high-radiation summer, monsoon rain and cool winter nights. Polyhouse Constructions supplies complete polyhouse and nethouse material kits and individual equipment from its Satara factory; erection is carried out by Kryzen Biotech’s construction team.

Pad cooling
Works: ~31°C inside
Humid months
Few
Shading need
High
Delivery
~5 days
Exhaust fan wall of a fan and pad polyhouse, equipment we supply to New Delhi
Exhaust fans pull air through wet cellulose pads on the opposite wall.

What the New Delhi climate asks of your structure

May is the critical heat month: the average afternoon high reaches 42.8°C, with 6.7 kWh/m²/day of sun and only 23% humidity. June remains at 42.1°C, while July brings the heaviest rain, about 217 mm. The equipment decision is therefore not simply polyfilm versus net; it is about removing heat, managing strong sunlight, maintaining air movement and carrying monsoon runoff away from the crop area.

Winter should also be considered while choosing curtains and crop timing. January nights average 5.9°C and December nights 7.7°C. The available climate data does not indicate a separate extra night-protection requirement, but a grower should avoid treating a New Delhi house as a summer-only installation: ventilation must be adjustable rather than permanently open.

The month-by-month table below is useful for setting seasonal operating routines. April–June needs the strongest cooling and shading response; July–September shifts attention to rainwater flow, film tension and crop humidity management.

  • April: 39°C afternoon high, 24% humidity and 6.6 kWh/m²/day sun.
  • May: 42.8°C afternoon high, 27.3°C night low and 6.7 kWh/m²/day sun.
  • July: 36.7°C afternoon high, 63% humidity and about 217 mm rain.
  • August: 75% humidity and about 203 mm rain.
  • January: 21.4°C afternoon high and 5.9°C night low.
MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan21.4°C5.9°C44%16 mm3.11.7
Feb25.7°C9.1°C41%22 mm4.31.9
Mar32.4°C14.9°C33%18 mm5.62
Apr39°C21.8°C24%15 mm6.62.2
May42.8°C27.3°C23%33 mm6.72.4
Jun42.1°C29.7°C36%80 mm6.12.5
Jul36.7°C27.8°C63%217 mm52.1
Aug33.7°C25.9°C75%203 mm4.91.8
Sep33.4°C23.2°C69%121 mm5.11.7
Oct32.2°C18.2°C51%13 mm4.71.4
Nov27.6°C12.6°C43%4 mm3.61.6
Dec22.8°C7.7°C42%8 mm31.7
NASA POWER long-term monthly averages for New Delhi.

Does fan-and-pad cooling make sense here?

Yes, the climate data supports fan-and-pad cooling in New Delhi. Pads can bring a May outside condition of about 43°C down to around 31°C inside. This is particularly relevant for crops that need a more controlled summer environment than a naturally ventilated polyhouse or nethouse can provide.

Whether it pays for a particular farm cannot be proved from temperature data alone. It depends on the crop, crop calendar, area, operating discipline and sale price achieved. The Delhi-district mandi figures show that capsicum averaged ₹3,324/q across nine markets, but its lowest month was May at ₹1,621/q; equipment investment should therefore be assessed against the intended harvest window, not against one average price.

For scale, the published fan-and-pad configuration for a 52 × 76 m house (3,952 m²) uses 12 exhaust fans and 82 cellulose pads, with material including GST shown as ₹32,48,775. That is a sizing example, not a substitute for an engineered layout for another area or crop.

  • Exhaust Fan: ₹22,700 per piece + GST.
  • Cellulose Pad (600X150X1800): ₹2,616 per piece + GST.
  • Aluminium Pad Frame (150 mm): ₹815 per metre + GST.
  • Air Circulation Fan: ₹8,999 per piece + GST; it is an optional upgrade in NVPH and fan-and-pad houses.

Ventilation and shade should work together

New Delhi is dry for much of the year: relative humidity is 24% in April, 23% in May and 36% in June. In a naturally ventilated polyhouse, a roof vent with roll-up curtains provides adjustable air exchange, while side insect net permits ventilation with pest exclusion. An air-circulation fan can be selected as an optional upgrade where internal air movement needs support.

For radiation control, choose shade according to the crop and system rather than assuming one net fits every season. White Shade Net 50% is listed at ₹27 per metre + GST and can be used in NVPH, fan-and-pad, square and curved nethouses. Aluminium Shade Net (4 m), a reflective optional upgrade for those systems, is listed at ₹315 per metre + GST. White diffused 250-micron polyfilm is listed at ₹254 per metre + GST for NVPH and fan-and-pad houses.

Keep the shade approach flexible. May has the strongest sun, but April and June also exceed 6 kWh/m²/day. A grower planning crops through cooler months should not make shading so permanent that it restricts useful winter light.

  • Manual Gear Roll Up Curtain Unit: ₹1,050 per piece + GST.
  • Curtain Pipe (27X2.0X6000): ₹758 per piece + GST.
  • Side Insect Net (5.2 m): ₹221 per metre + GST.
  • Curtain Clamp 0.75-inch: ₹11 per piece + GST.

Prepare rain paths before the monsoon

New Delhi receives about 750 mm rain in a year, with July alone at about 217 mm, August 203 mm and September 121 mm. For a polyfilm-covered NVPH or fan-and-pad house, gutters, funnels and a properly seated side skirting apron are practical material priorities before July. Standard gutters are the specified need for this climate.

The listed GI Gutter Sheet is ₹335 per metre + GST, Gutter Funnel is ₹1,350 per piece + GST, and Side Skirting Apron (1.5 m) is ₹64 per metre + GST. These are materials for managing roof runoff and the lower side of the house; quantities must follow the actual drawing and dimensions.

Do not postpone checks until the wettest month. Clear existing leaves or debris from gutters and funnels, inspect film tension, and check that the apron is seated before the monsoon sequence begins.

  • GI Gutter Sheet is used in NVPH and fan-and-pad systems.
  • Gutter Funnel is used in NVPH and fan-and-pad systems.
  • Side Skirting Apron is used in NVPH, fan-and-pad, square and curved nethouses.

Match protected cropping with the Delhi market window

Markets in New Delhi district include APMC Keshopur, APMC Azadpur, APMC Shahdara and Fruit and Vegetable Market, Gazipur APMC. The price table below is based on Agmarknet daily prices over the last two years, expressed in ₹ per quintal. It is useful for comparing harvest windows, but it is not a promise of a future market price.

May is a notable low-price month for several listed crops: cucumber was ₹1,348/q, tomato ₹1,027/q, capsicum ₹1,621/q, bitter gourd ₹1,529/q and okra ₹1,839/q. This matters because May is also the most demanding cooling month. A fan-and-pad plan aimed at summer production should be paired with a realistic crop and market plan, rather than assuming heat management alone creates returns.

There are also stronger seasonal observations: capsicum reached ₹5,397/q in July, cauliflower ₹5,027/q in July, tomato ₹3,137/q in November, bitter gourd ₹4,533/q in February and okra ₹6,192/q in December. Plan planting and protection equipment around crop requirements and the likely selling period.

  • Cucumber: average modal price ₹2,098/q across 10 markets; highest ₹2,616/q in January.
  • Capsicum: average modal price ₹3,324/q across 9 markets; highest ₹5,397/q in July.
  • Coriander (leaves): average modal price ₹3,535/q across 10 markets; highest ₹7,522/q in July.
  • Tomato: average modal price ₹2,073/q across 10 markets; highest ₹3,137/q in November.
CropMarketsAverage modal priceHighest monthLowest month
Cucumber10₹2,098/qJan (₹2,616)May (₹1,348)
Brinjal10₹1,912/qJul (₹2,266)May (₹1,609)
Cabbage10₹1,175/qNov (₹1,765)May (₹680)
Tomato10₹2,073/qNov (₹3,137)May (₹1,027)
Cauliflower10₹2,654/qJul (₹5,027)Feb (₹854)
Capsicum9₹3,324/qJul (₹5,397)May (₹1,621)
Bottle gourd10₹1,765/qDec (₹2,276)May (₹1,141)
Bitter gourd9₹2,921/qFeb (₹4,533)May (₹1,529)
Coriander (leaves)10₹3,535/qJul (₹7,522)Feb (₹1,328)
Okra (bhindi)9₹3,574/qDec (₹6,192)May (₹1,839)
Agmarknet daily prices via data.gov.in, last two years, markets in New Delhi district. ₹ per quintal.

A calendar for equipment care in this city

The best time for cooling-system servicing is before May, not after the first severe heat spell. Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust-fan belt and shutter before the 43°C peak. This gives the system its best chance of operating properly through May and June.

Before July, clear gutters and funnels, re-seat the side skirting apron and check polyfilm tension. The monsoon work should continue through August and September, when rain remains substantial and humidity is at its annual high in the supplied data.

In the dry season, tighten clamps and bolts, check GI springs in aluminium profiles, and arrange replacement film or net ahead of the next season. Carrying out these checks in October–March avoids urgent material requirements in the heat or rain.

  • Before May: pads, pad gutter, filter, fan belts and shutters.
  • Before July: gutters, funnels, skirting apron and film tension.
  • Dry season: clamps, bolts, GI springs, and replacement film or net.
  1. 1

    Before May

    Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 43°C peak.

  2. 2

    Before July

    Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 217 mm.

  3. 3

    Dry season

    Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.

Material quality, documents and written warranty

Polyhouse Constructions is a manufacturer of protected-cultivation structures and material, and a venture of Kryzen Biotech Pvt Ltd. Complete kits can include the GI structure, polyfilm, nets and fittings for naturally ventilated polyhouses, fan-and-pad polyhouses, square nethouses and curved nethouses. GI pipes are ISI-marked and made from branded Tata, Jindal and JSW steel.

Ask for the technical record with the material, not only a visual inspection of pipes and fittings. Every dispatch is supported with a lab test certificate, and every product has a technical data sheet. The quality process includes a 32-point QA checklist for every part, along with third-party tensile testing of GI pipe steel, salt-spray testing of zinc-coating corrosion resistance, and chemical analysis of steel composition.

The written warranty is 15 years on the GI structure, 2.5 years on polyfilm and 3 years on shade and insect nets. These cover material categories; correct fitting, routine maintenance and system selection still matter in the hot and rainy New Delhi cycle.

  • GI structure warranty: 15 years.
  • Polyfilm warranty: 2.5 years.
  • Shade and insect-net warranty: 3 years.
  • Documents: lab test certificate with dispatch and a technical data sheet for every product.
Tensile test for New Delhi

Tensile test

Strength of the GI pipe steel, by a third-party lab.

Salt spray test for New Delhi

Salt spray test

Corrosion resistance of the zinc coating.

Chemical analysis for New Delhi

Chemical analysis

Spectrometer check of the steel composition.

PartWarranty
GI structure15 years
Polyfilm2.5 years
Shade and insect nets3 years

Ordering kits, replacement parts and construction

A farmer can build a complete material kit online at polyhouseconstructions.com and view every item, quantity and that week’s rate. Prices follow weekly GI and plastic rates and are updated every Friday. A 5% bulk discount applies on 10 or more units of an item. Booking is with 5% advance and the remaining 95% before dispatch.

For New Delhi, material is supplied from the factory at Degaon, Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra. The supplied delivery estimate is 5 days after dispatch for the 1,600 km route. Polyhouse Constructions does not have a New Delhi office; construction and erection are done by Kryzen Biotech’s construction team.

For repairs, expansions or a single failed component, fans, pads, nets and fittings are sold individually at the weekly rate. This is useful for maintaining a house without having to buy a complete new kit.

  • Order complete material kits or individual items.
  • A listed fitting example: Clamps 60 mm Full, ₹17 per piece + GST.
  • Aluminium Profile: ₹27 per metre + GST; GI Spring: ₹6 per metre + GST.
  • Construction/erection: Kryzen Biotech’s construction team.

Need only a few items?

Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.

Buy individual items →

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Will a fan-and-pad polyhouse cool effectively in New Delhi?

Yes. The climate data states that pad cooling works here, reducing a May outside temperature of about 43°C to around 31°C inside. May is dry at 23% humidity, which supports evaporative cooling, but final system design should follow the crop and house dimensions.

What should I prioritise for a naturally ventilated polyhouse in New Delhi?

Prioritise a roof vent, roll-up curtains and side insect net for adjustable air movement, plus shading for the April–June sun. For the July–September monsoon, include gutters, funnels and correctly fitted side skirting apron.

What are the listed prices of key cooling items?

An Exhaust Fan is listed at ₹22,700 per piece + GST, a Cellulose Pad (600X150X1800) at ₹2,616 per piece + GST, and an Air Circulation Fan at ₹8,999 per piece + GST. Prices follow weekly GI and plastic rates, updated every Friday.

How quickly can equipment be delivered to New Delhi?

The supplied estimate is 5 days after dispatch from the Satara factory, for a distance of 1,600 km. Material is supplied from Degaon, Tal. Wai, Satara; there is no New Delhi office.

Can I buy only spare nets, fans or fittings later?

Yes. Every fan, pad, net and fitting is available individually at the weekly rate for repairs and extensions. This allows replacement of a specific item without purchasing a complete material kit.

Equipment supply near New Delhi

Nearby towns on the same route, and whether pad cooling works there.

TownFrom New DelhiPad coolingHumid monthsHottest month
Equipment supplier in Bhalswa Jahangir Pur~10 kmWorks (~30°C)0May, 43°C
Equipment supplier in Delhi~10 kmWorks (~31°C)0May, 43°C
Equipment supplier in Karawal Nagar~10 kmWorks (~31°C)0May, 43°C
Equipment supplier in Nangloi Jat~20 kmWorks (~30°C)0May, 43°C
Equipment supplier in Sultan Pur Majra~20 kmWorks (~30°C)0May, 43°C
Equipment supplier in Loni~20 kmWorks (~30°C)0May, 43°C

All towns: Protected cultivation equipment by town

Sources

  1. Kryzen: Polyhouse construction in New Delhi
  2. Kryzen: Polyhouse farming in New Delhi
  3. NASA POWER monthly climate averages for New Delhi
  4. Agmarknet daily prices (data.gov.in)
Build your kit