How it worksBuy individual items

Equipment · New Delhi district, Delhi

Protected cultivation equipment for Delhi growers

By Editorial Team, Kryzen Biotech · Updated 13 November 2026

Delhi’s protected-cultivation equipment has to handle a very dry, high-sun summer, monsoon rain and cool winter nights. Polyhouse Constructions supplies complete material kits and individual equipment from its Satara factory; erection is carried out by Kryzen Biotech’s construction team.

Pad cooling
Works: ~31°C inside
Humid months
Few
Shading need
High
Delivery
~5 days
Exhaust fan wall of a fan and pad polyhouse, equipment we supply to Delhi
Exhaust fans pull air through wet cellulose pads on the opposite wall.

Plan equipment around Delhi’s sharp seasonal changes

May is the key design month for a Delhi polyhouse. The average afternoon high reaches 42.8°C, humidity is only 23%, and solar energy peaks at 6.7 kWh/m²/day. June remains at 42.1°C in the afternoon. This calls for active cooling where the crop and production plan justify it, along with shade and dependable air movement.

The situation changes in the monsoon. July receives about 217 mm of rain and August 203 mm; humidity rises to 63% in July and 75% in August. Water must leave the roof cleanly, while ventilation and insect-net openings need attention. January has an average night low of 5.9°C, so the house should retain a sound covering and growers should manage openings carefully at night. There is no listed need for extra night equipment.

The month-by-month table below is useful when deciding whether to run a naturally ventilated polyhouse, fan & pad house, or nethouse, and when to schedule maintenance.

  • April–June: strongest heat, sun and dry-air pressure.
  • July–September: rain handling and ventilation become operational priorities.
  • December–February: check covering, openings and night management as temperatures fall.
MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan21.4°C5.9°C44%16 mm3.11.7
Feb25.7°C9.1°C41%22 mm4.31.9
Mar32.4°C14.9°C33%18 mm5.62
Apr39°C21.8°C24%15 mm6.62.2
May42.8°C27.3°C23%33 mm6.72.4
Jun42.1°C29.7°C36%80 mm6.12.5
Jul36.7°C27.8°C63%217 mm52.1
Aug33.7°C25.9°C75%203 mm4.91.8
Sep33.4°C23.2°C69%121 mm5.11.7
Oct32.2°C18.2°C51%13 mm4.71.4
Nov27.6°C12.6°C43%4 mm3.61.6
Dec22.8°C7.7°C42%8 mm31.7
NASA POWER long-term monthly averages for Delhi.

Cooling and shade: when fan & pad makes sense in Delhi

Fan & pad cooling works in Delhi because the hottest period is dry. In May, cellulose pads can bring an outside temperature of about 43°C down to around 31°C inside. That is a meaningful difference for crops needing a more controlled summer environment; however, the decision should be based on the crop, production timing and the equipment investment rather than temperature alone.

For a naturally ventilated polyhouse (NVPH), use roof ventilation and roll-up side curtains to move air, with shade for the intense April-to-June sun. White Shade Net 50% is ₹27 per metre + GST, while Aluminium Shade Net (4 m), a reflective upgrade, is ₹315 per metre + GST. Polyfilm White Diffused 250 Micron (4.5 m) is ₹254 per metre + GST and is used in NVPH and fan & pad houses.

The equipment priorities table below separates what Delhi needs for cooling, air movement, shading, rain and winter nights. It is a practical starting point before finalising a system.

  • Fan & pad: strongest cooling option for Delhi’s dry May and June conditions.
  • NVPH: roof vent, curtains and insect-net sides support natural air exchange.
  • Aluminium or double-layer net is relevant where May sun needs additional shading.
NeedFor DelhiWhy
CoolingExhaust fans + cellulose padsPads bring 43°C to ~31°C in May
Air movementRoof vent + curtainsAir is dry most of the year
ShadingAluminium or double-layer netSun peaks at 6.7 kWh/m² in May
RainStandard guttersJuly: ~217 mm
NightsNo extra need—

Fan & pad equipment and current item prices

A fan & pad house uses exhaust fans to draw air through cellulose pads. Individual items can be purchased rather than only as a package: an Exhaust Fan is ₹22,700 per piece + GST; Cellulose Pad (600X150X1800) is ₹2,616 per piece + GST; and Aluminium Pad Frame (150 mm) is ₹815 per metre + GST. An Air Circulation Fan is an optional upgrade for NVPH or fan & pad systems at ₹8,999 per piece + GST.

As a sizing reference, a 52 × 76 m fan & pad house covering 3,952 m² uses 12 exhaust fans and 82 cellulose pads. The stated material figure including GST for that reference is ₹32,48,775. It is a reference configuration, not a substitute for a crop- and site-specific equipment list.

Prices follow weekly GI and plastic rates and are updated every Friday. A 5% bulk discount applies when purchasing 10 or more units of an item. Farmers can build a complete material kit online and see every item, quantity and that week’s rate.

  • Book with 5% advance; 95% is payable before dispatch.
  • Material is supplied from the Degaon, Satara factory; Delhi delivery is stated as 5 days after dispatch.
  • Kryzen Biotech’s team undertakes construction and erection.

Ventilation, insect exclusion and rain hardware

For an NVPH, side openings are not simply an add-on in Delhi’s hot, mostly dry months. The Manual Gear Roll Up Curtain Unit is ₹1,050 per piece + GST, Curtain Pipe (27X2.0X6000) is ₹758 per piece + GST, and Side Insect Net (5.2 m) is ₹221 per metre + GST. The curtain system allows growers to adjust opening conditions as heat, rain and winter nights change.

Monsoon preparation matters because July alone averages about 217 mm of rain. GI Gutter Sheet is ₹335 per metre + GST and Gutter Funnel is ₹1,350 per piece + GST for NVPH and fan & pad systems. Side Skirting Apron (1.5 m), used across listed house types, is ₹64 per metre + GST. Keep these components clear and correctly seated before the wet period rather than waiting for a leak or runoff issue.

A complete kit can include the GI structure, polyfilm, nets and fittings for an NVPH, fan & pad polyhouse, square nethouse or curved nethouse. Select the system around the crop and the level of climate control required, not only the initial material list.

  • Use roll-up curtains and side insect net in an NVPH.
  • Use gutters and funnels on polyhouse systems before the July–August rains.
  • Use side skirting apron across polyhouse and nethouse options where specified.

Crop timing and Delhi mandi price seasons

Protected cultivation lets a grower target crop quality and timing, but it does not remove market risk. The district data covers markets including APMC Keshopur, APMC Azadpur, APMC Shahdara and Gazipur. Review the price season before fixing a planting plan and before deciding how much cooling equipment is required.

For example, cucumber’s listed average modal price is ₹2,098/q across 10 markets, with a high of ₹2,616 in January and a low of ₹1,348 in May. Capsicum’s average is ₹3,324/q across 9 markets, with its highest listed month July at ₹5,397 and lowest May at ₹1,621. Tomato is listed highest in November at ₹3,137/q and lowest in May at ₹1,027/q.

These are historical daily-price observations over the last two years, expressed per quintal, rather than a promise of future prices. The table below offers the full set of crop seasons for comparison.

  • Compare crop harvest timing with Delhi’s heat and market season.
  • May is the listed low month for several crops, including cucumber, tomato and capsicum.
  • Consider market access across the listed Delhi district markets when planning dispatches.
CropMarketsAverage modal priceHighest monthLowest month
Cucumber10₹2,098/qJan (₹2,616)May (₹1,348)
Brinjal10₹1,912/qJul (₹2,266)May (₹1,609)
Cabbage10₹1,175/qNov (₹1,765)May (₹680)
Tomato10₹2,073/qNov (₹3,137)May (₹1,027)
Cauliflower10₹2,654/qJul (₹5,027)Feb (₹854)
Capsicum9₹3,324/qJul (₹5,397)May (₹1,621)
Bottle gourd10₹1,765/qDec (₹2,276)May (₹1,141)
Bitter gourd9₹2,921/qFeb (₹4,533)May (₹1,529)
Coriander (leaves)10₹3,535/qJul (₹7,522)Feb (₹1,328)
Okra (bhindi)9₹3,574/qDec (₹6,192)May (₹1,839)
Agmarknet daily prices via data.gov.in, last two years, markets in New Delhi district. ₹ per quintal.

A maintenance calendar that fits Delhi weather

Before May, wash or replace cellulose pads, clean the pad gutter and filter, and inspect every exhaust-fan belt and shutter. This work should be complete before the 42.8°C May average high, rather than during peak cooling demand. Also inspect shade material and ventilation components before the high-sun period.

Before July, clear gutters and funnels, re-seat the side skirting apron, and inspect film tension. This is timed to July’s approximately 217 mm rainfall. During the dry season, tighten clamps and bolts, check GI springs in aluminium profiles, and order replacement film or net before the next season.

Keep small repair items available where possible. Individual fans, pads, nets and fittings are sold separately at the weekly rate for repairs and extensions, so replacement does not require purchasing a full kit.

  • Before May: cooling and shade inspection.
  • Before July: drainage, skirting and covering inspection.
  • Dry season: fittings, spring and replacement-material check.
  1. 1

    Before May

    Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 43°C peak.

  2. 2

    Before July

    Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 217 mm.

  3. 3

    Dry season

    Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.

What to check before buying the structure and covering

A protected structure should come with traceable material and documented checks. Polyhouse Constructions uses ISI-marked branded steel from Tata, Jindal and JSW for GI pipes, with in-house engineering and manufacturing. Every part is checked through a 32-point QA checklist, and dispatch includes a lab test certificate and a technical data sheet for every product.

The listed third-party checks cover tensile strength of GI pipe steel, salt-spray corrosion resistance of the zinc coating, and chemical analysis of steel composition. This is useful for comparing an engineered material kit with an unspecified pipe-and-fabric arrangement.

Warranty coverage is 15 years on the GI structure, 2.5 years on polyfilm and 3 years on shade and insect nets. Ask for the product-specific technical information and retain dispatch documents for future maintenance and replacement matching.

  • GI structure warranty: 15 years.
  • Polyfilm warranty: 2.5 years.
  • Shade and insect-net warranty: 3 years.
Tensile test for Delhi

Tensile test

Strength of the GI pipe steel, by a third-party lab.

Salt spray test for Delhi

Salt spray test

Corrosion resistance of the zinc coating.

Chemical analysis for Delhi

Chemical analysis

Spectrometer check of the steel composition.

PartWarranty
GI structure15 years
Polyfilm2.5 years
Shade and insect nets3 years

Ordering kits, fittings and replacement items for Delhi

Polyhouse Constructions, a venture of Kryzen Biotech Pvt Ltd, manufactures protected-cultivation structures and material in India. Complete kits are available for naturally ventilated polyhouses, fan & pad polyhouses, square nethouses and curved nethouses. A buyer can also order specific materials such as film, net, fans, pads and fittings for an existing house or an extension.

If only a component needs replacement, individual items are available at the weekly rate. This helps when a curtain fitting, net, fan, pad or other material needs repair without changing the full structure. Delhi is supplied from the Satara factory rather than a town office.

For growers planning a subsidised project, MIDH/NHM is stated as 50% of the cost norm up to 4,000 m² per beneficiary. NHB commercial projects above 2,500 m² have separate credit-linked provisions and require In-Principle Approval before starting; confirm current norms and eligibility with the state horticulture department before committing work.

  • Complete kits and individual spares are both available.
  • Weekly rates are updated every Friday.
  • Delhi delivery is 5 days after dispatch.

Need only a few items?

Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.

Buy individual items →

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Does fan & pad cooling work for a polyhouse in Delhi?

Yes. Delhi’s May average high is 42.8°C with 23% humidity, and the stated fan-and-pad performance is from about 43°C outside to around 31°C inside. It is most relevant where the crop and production plan justify active cooling.

What protected-cultivation equipment is most important before Delhi summer?

For fan & pad houses, inspect cellulose pads, pad gutters, filters, exhaust-fan belts and shutters before May. For naturally ventilated houses, prioritise roof ventilation, roll-up curtains and shade because May sun reaches 6.7 kWh/m²/day.

How should I prepare a polyhouse for Delhi monsoon?

Before July, clear gutters and funnels, check film tension, and re-seat the side skirting apron. July averages about 217 mm of rain and August about 203 mm, so drainage should be checked before the wet period.

What are the listed prices of fan and pad items?

An Exhaust Fan is ₹22,700 per piece + GST, a Cellulose Pad (600X150X1800) is ₹2,616 per piece + GST, and an Aluminium Pad Frame (150 mm) is ₹815 per metre + GST. Rates follow weekly GI and plastic rates and are updated every Friday.

Can I buy only replacement polyhouse parts in Delhi?

Yes. Fans, pads, nets and fittings are sold individually at the weekly rate for repairs and extensions. Material is supplied from the Satara factory, with Delhi delivery stated as 5 days after dispatch.

Equipment supply near Delhi

Nearby towns on the same route, and whether pad cooling works there.

TownFrom DelhiPad coolingHumid monthsHottest month
Equipment supplier in Bhalswa Jahangir Pur~10 kmWorks (~30°C)0May, 43°C
Equipment supplier in Karawal Nagar~10 kmWorks (~31°C)0May, 43°C
Equipment supplier in New Delhi~10 kmWorks (~31°C)0May, 43°C
Equipment supplier in Nangloi Jat~20 kmWorks (~30°C)0May, 43°C
Equipment supplier in Sultan Pur Majra~20 kmWorks (~30°C)0May, 43°C
Equipment supplier in Loni~20 kmWorks (~30°C)0May, 43°C

All towns: Protected cultivation equipment by town

Sources

  1. Kryzen: Polyhouse construction in Delhi
  2. Kryzen: Polyhouse farming in Delhi
  3. NASA POWER monthly climate averages for Delhi
  4. Agmarknet daily prices (data.gov.in)
Build your kit