Polyhouse material · Vadodara district, Gujarat
Polyhouse material for farms in Vadodara
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
For most protected-vegetable farms around Vadodara, a naturally ventilated polyhouse is the practical starting structure: it keeps the July–September rain off the crop while roof vents and roll-up curtains provide air movement. A fan-and-pad polyhouse is worth considering where summer leafy greens are the crop focus, because a 43°C May afternoon can be brought to about 33°C inside.
- Distance from factory
- ~630 km by road
- Delivery after dispatch
- ~3 days
- Hottest month
- May, ~43°C
- Climate pick
- NVPH + fan & pad

Start with the structure that handles heat, rain and humidity
Vadodara has two distinct design challenges. May is very hot, with an average afternoon high of 43.1°C and strong solar energy of 7.5 kWh/m²/day. Then the monsoon brings 967 mm annual rainfall, with 331 mm in July alone; humidity stays high from July to September, reaching 80% in July, 86% in August and 83% in September.
For a farm producing fruiting vegetables through much of the year, choose a naturally ventilated polyhouse (NVPH). Its film roof protects the crop from rain, while roof vents and roll-up side curtains move air without depending on power. It is the usual first choice for Vadodara. Make ventilation a working part of the crop plan in the humid months: side curtains should be capable of opening fully, with side insect net retained as the barrier.
Choose fan-and-pad cooling if the commercial plan needs lettuce or other leafy greens during summer. In May, wet pads and exhaust fans can reduce a 43°C afternoon to about 33°C inside. A square or curved nethouse is a seasonal, lower-cost option rather than a monsoon replacement for a film-roof structure. The favourable nethouse period here is October to February, when rainfall is low; a curved model gives taller crops more headroom and air movement.
- Naturally ventilated polyhouse: best fit for rain protection and ventilation across the year.
- Fan & pad polyhouse: good fit for summer cooling where leafy greens are planned.
- Square or curved nethouse: seasonal choice for October–February, nurseries or crops that need shade and insect protection.

Naturally ventilated polyhouse
Best fitFilm roof keeps monsoon rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Vadodara.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 43°C afternoon down to about 33°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from October to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
Read the year before fixing crop and installation timing
The monthly climate table below is useful when deciding not only the structure but also the crop cycle. March to May is dry and increasingly hot: highs move from 37.8°C in March to 41.8°C in April and 43.1°C in May. June begins the sharp rise in rain, followed by the wettest and most humid period in July and August. The relatively dry months from October to February are more forgiving for a nethouse and nursery work.
A polyhouse should not be treated as a sealed space in the monsoon. The 80–86% humidity of July–August means ventilation, well-managed irrigation and crop hygiene need attention. Conversely, the cool January night average is 11.7°C, so a crop calendar must account for cooler nights even though afternoon conditions remain mild.
- May: peak heat and strongest sun.
- July: wettest month, with 331 mm average rain.
- July–September: the humid spell; maximise usable natural ventilation.
- October–February: stated nethouse season.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 29.4°C | 11.7°C | 34% | 1 mm | 4.7 | 2 |
| Feb | 33.2°C | 14.6°C | 28% | 2 mm | 5.6 | 2 |
| Mar | 37.8°C | 19.2°C | 25% | 4 mm | 6.6 | 2 |
| Apr | 41.8°C | 23.7°C | 28% | 3 mm | 7.3 | 2.4 |
| May | 43.1°C | 27°C | 37% | 4 mm | 7.5 | 3.6 |
| Jun | 37.8°C | 27.6°C | 59% | 143 mm | 5.9 | 4.2 |
| Jul | 32.3°C | 25.5°C | 80% | 331 mm | 4.2 | 3.8 |
| Aug | 30.5°C | 24.4°C | 86% | 306 mm | 3.9 | 3.1 |
| Sep | 31.2°C | 23.8°C | 83% | 152 mm | 4.8 | 2 |
| Oct | 32.8°C | 20.5°C | 66% | 15 mm | 5.5 | 1.3 |
| Nov | 31.8°C | 16.4°C | 52% | 4 mm | 4.7 | 1.5 |
| Dec | 29.7°C | 12.9°C | 42% | 2 mm | 4.3 | 1.8 |
Specify materials for the Vadodara site, not a generic kit
A complete Polyhouse Constructions kit can include the GI structure, cover material, nets and fittings. For Vadodara, specify 250-micron white diffused, UV-stabilised polyfilm for the roof. Diffused film spreads the intense May light more evenly and helps reduce leaf scorch. Use aluminium reflective shade net where shade is required in the high-heat period; unlike a heat-absorbing cover, it reflects heat outward.
The side arrangement matters as much as the roof. Ask for roll-up side curtains and side insect net so that the structure can be opened fully during the July–September humid spell while maintaining an insect barrier. GI gutter sheet with funnels is supplied for rain handling; with about 967 mm annual rainfall, standard gutters are suitable for this location. Available shade-net options also include white, green and black 50% shade net.
The frame is supplied in ISI-marked branded steel from Tata, Jindal and JSW. The GI structure carries a 15-year warranty, polyfilm 2.5 years and nets 3 years. Before ordering, share the intended crop and whether the farm needs a film-roof polyhouse, a shade nethouse or both; this changes the material list rather than merely changing the cover.
- Roof: 250-micron white diffused UV-stabilised polyfilm.
- Heat management: aluminium reflective shade net where needed.
- Humidity management: roll-up curtains with side insect net.
- Rain handling: GI gutter sheet and funnels.
| Part | What we supply | Why in Vadodara |
|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Sunlight peaks in May at about 7.5 kWh per m² a day; diffused film spreads it and cuts leaf scorch. |
| Shading | Aluminium (reflective) shade net | 43°C highs and strong sun: a reflective net sends heat back out instead of holding it inside. |
| Gutters | GI gutter sheet with funnels | About 967 mm of rain a year, so standard gutters are enough. |
| Ventilation | Roll-up side curtains, side insect net | Humid spell from July to September; open the curtains fully in those months. |
Match protected crops with district market seasons
Crop selection needs both climate fit and a selling route. Vadodara district market records cover Padra APMC and Vadodara(Sayajipura) APMC, among the four listed district markets. The mandi table below gives daily-price observations from the last two years, expressed as modal prices per quintal. It shows historical high and low months, not a promise of the next season’s price.
For the cooler and drier production window, cabbage, cauliflower and brinjal recorded their highest listed months in November: ₹1,717/q, ₹2,624/q and ₹2,572/q respectively. Bottle gourd also peaked in November at ₹1,829/q. These figures make November market timing worth considering when planning transplanting and harvest, while allowing for the farm’s actual crop duration.
For warmer or rainy-season market opportunities, cucumber’s listed high was ₹2,736/q in June, green chilli ₹4,626/q in July, tomato ₹2,953/q in August, and coriander leaves ₹5,754/q in July. Humidity in these months is high, so crops intended for these sales months need an appropriate protected structure and active ventilation. Okra’s highest listed month was December at ₹4,192/q.
- Cucumber: district average ₹2,216/q; historical high in June.
- Green chilli: district average ₹3,171/q; historical high in July.
- Tomato: district average ₹1,876/q; historical high in August.
- Cabbage, cauliflower, bottle gourd and brinjal: listed highs in November.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Cabbage | 4 | ₹1,124/q | Nov (₹1,717) | Mar (₹394) |
| Green chilli | 4 | ₹3,171/q | Jul (₹4,626) | Sep (₹1,947) |
| Tomato | 4 | ₹1,876/q | Aug (₹2,953) | Mar (₹659) |
| Cauliflower | 4 | ₹1,998/q | Nov (₹2,624) | Mar (₹1,140) |
| Bottle gourd | 4 | ₹1,437/q | Nov (₹1,829) | May (₹1,014) |
| Brinjal | 4 | ₹1,685/q | Nov (₹2,572) | Mar (₹809) |
| Spinach | 4 | ₹1,578/q | Jul (₹2,434) | Jan (₹659) |
| Cucumber | 4 | ₹2,216/q | Jun (₹2,736) | Mar (₹1,545) |
| Coriander (leaves) | 4 | ₹3,142/q | Jul (₹5,754) | Jan (₹1,181) |
| Okra (bhindi) | 4 | ₹3,113/q | Dec (₹4,192) | May (₹2,054) |
Crop options to discuss while building the kit
For an NVPH, parthenocarpic cucumber is a fast crop with a stated 3–4 month cycle, and drip irrigation helps it through dry spells. Coloured capsicum is another NVPH crop option; use shade-net management through May, when daytime highs reach 43°C. Gerbera and rose are also listed NVPH options for growers planning cut flowers.
A fan-and-pad house is the relevant system where lettuce and leafy greens must continue through summer, using the lower inside temperature available with pads. For a square nethouse, vegetable seedlings can be raised from October to February for the local planting season. These are starting points for selecting the cover, ventilation and accessories; they are not a substitute for planning the crop against the farm’s water, labour and market route.
- NVPH: coloured capsicum, parthenocarpic cucumber, gerbera and rose.
- Fan & pad: lettuce and leafy greens for summer production.
- Square nethouse: vegetable seedling nursery in October–February.

Coloured capsicum
NVPHGrow under shade net through May, when highs reach 43°C.

Cucumber (parthenocarpic)
NVPHFast 3–4 month crop; drip irrigation keeps it going in dry spells.

Lettuce and leafy greens
Fan & pad polyhousePads bring May afternoons down to about 33°C, so greens can grow through summer.

Gerbera and rose
NVPHCut flowers with year-round demand from city florists and events.

Vegetable seedlings
Square nethouseRaise nursery seedlings from October to February for the local planting season.
What comes from a manufacturer rather than a site-cut fabricator
Polyhouse Constructions is a manufacturer of protected-cultivation structures and materials, and a venture of Kryzen Biotech Pvt Ltd. Material is manufactured at Degaon on the Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra. This is not a Vadodara office or local fabrication workshop: material is supplied from the factory.
With a designed kit, the GI material is cut and drilled to the drawing, and every part is counted against that design. In-house engineering, a 32-point QA checklist, a lab test certificate with every dispatch and a technical data sheet for every product give the farmer documents to check alongside the delivery. This is especially useful when the ordered kit has roof film, shade net, insect net, gutter components, curtains and fittings that must work together.
The comparison below explains the difference from a typical local fabricator. The important buying check is not simply the initial quote: ask whether the steel source, design, part count, load checks, written warranty and product documentation are stated. Polyhouse Constructions offers a 15-year manufacturing warranty on the GI structure.
- In-house manufacturing and engineering, rather than pipes cut on site.
- ISI-marked branded steel from Tata, Jindal and JSW.
- 32-point QA, lab certificate with dispatch and product technical sheets.
- Complete kits or individual material items are available.
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | 30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | 15-year manufacturing warranty | Rarely a written warranty |
| Engineering | In-house engineering team | No design or load checks |
| Manufacturing | In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | 32-point QA checklist for every part | Visual check at best |
| Lab certificate | Lab test certificate with every dispatch | Not provided |
| Technical sheet | Technical data sheet for every product | Not available |
| Material match | Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | Backed by industry leader Kryzen Biotech | Single-owner workshop |
Delivery, construction and the online order route
Vadodara is 630 km from the Satara factory. Delivery is expected in 3 days after dispatch. As material comes from the factory, plan the site readiness and unloading arrangement before dispatch rather than expecting town-office stock.
Build the requirement online at polyhouseconstructions.com. The kit builder lets the buyer see every item, quantity and that week’s rate before placing the order. Rates follow weekly GI and plastic rates and are updated every Friday. A 5% bulk discount applies on 10 or more units of an item. The booking payment is 5% advance, with 95% due before dispatch.
If erection is required, construction is done by Kryzen Biotech’s construction team through kryzen.com. Polyhouse Constructions supplies the material; do not assume that material purchase means a Vadodara office-based construction crew. Confirm the final kit, crop requirement and construction scope before booking.
- Factory-to-Vadodara distance: 630 km.
- Delivery: 3 days after dispatch.
- Booking: 5% advance; 95% before dispatch.
- Construction: Kryzen Biotech construction team.
Check subsidy eligibility before work starts
For Gujarat, the published MIDH/NHM figure is 50% of the cost norm, up to 4,000 m² per beneficiary. The cited norms are ₹844/m² for tubular NVPH, ₹1,400/m² for fan & pad and ₹710/m² for a shade net house. Vadodara is not under the hilly or NE higher-norm provision, so use the non-hilly norms when making an initial estimate.
For NHB commercial projects above 2,500 m², the guideline cited is a credit-linked back-ended subsidy of 50% of project cost at admissible norms, capped at ₹56 lakh per project. NHB requires In-Principle Approval before starting. Norms can change, so confirm the current position and procedure with the Gujarat state horticulture department before committing funds, ordering material or beginning work.
- MIDH/NHM: 50% of cost norm, up to 4,000 m² per beneficiary.
- NHB commercial route: above 2,500 m²; In-Principle Approval is needed before starting.
- Confirm current norms and application procedure with the state horticulture department.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~43°C highs | ||||||||||||
| Strongest sun | 7.5 kWh/m²/day | ||||||||||||
| Wettest month | ~331 mm | ||||||||||||
| Humid (75%+) | July–September | ||||||||||||
| Nethouse season | October–February |
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Which polyhouse is best for Vadodara?
A naturally ventilated polyhouse is the usual first choice because its film roof protects the crop in the monsoon and its roof vents and roll-up curtains help move air. A fan-and-pad house is a better fit where summer leafy greens are planned, as May’s 43°C afternoon can be reduced to about 33°C inside.
Can I use only a nethouse in Vadodara?
A square or curved nethouse is best treated as a seasonal option from October to February, when rainfall is low. It is suitable for nursery work and shade/insect protection, but it does not provide the film-roof rain protection of an NVPH during the July–September humid monsoon period.
What materials should I ask for in a Vadodara polyhouse kit?
Ask for 250-micron white diffused UV-stabilised polyfilm, roll-up side curtains, side insect net, GI gutter sheet with funnels, and aluminium reflective shade net where heat management is needed. The GI structure uses ISI-marked branded steel from Tata, Jindal and JSW.
How long does delivery to Vadodara take, and who erects the structure?
Vadodara is 630 km from the Satara factory, and delivery is expected in 3 days after dispatch. Polyhouse Constructions supplies factory-made material; erection is carried out by Kryzen Biotech’s construction team.
Which nearby mandis should I consider while planning protected crops?
The district data covers Padra APMC and Vadodara(Sayajipura) APMC among four listed markets. Historical price highs include cucumber in June at ₹2,736/q, green chilli in July at ₹4,626/q, tomato in August at ₹2,953/q and several vegetables, including cabbage and cauliflower, in November; these are past modal-price patterns, not assured future rates.
Polyhouse material near Vadodara
Supplying a farm outside Vadodara? These nearby towns, with their own weather, are on the same delivery route.
| Town | From Vadodara | Hottest month | Rain a year | Suits |
|---|---|---|---|---|
| Polyhouse material in Padra | ~20 km | May, 42°C | 1,131 mm | NVPH + fan & pad |
| Polyhouse material in Anand | ~50 km | May, 43°C | 967 mm | NVPH + fan & pad |
| Polyhouse material in Petlad | ~60 km | May, 43°C | 843 mm | NVPH + fan & pad |
| Polyhouse material in Umreth | ~60 km | May, 43°C | 967 mm | NVPH + fan & pad |
| Polyhouse material in Nadiad | ~70 km | May, 43°C | 967 mm | NVPH + fan & pad |
| Polyhouse material in Rajpipla | ~70 km | May, 42°C | 1,135 mm | NVPH + fan & pad |
