Subsidy guide · Vadodara district, Gujarat
NHB subsidy polyhouse project in Vadodara
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
For a commercial protected-cultivation project in Vadodara, the key decision is whether the area and finance fit MIDH or an NHB credit-linked project. A naturally ventilated polyhouse is usually the practical first structure here; for hot-season production, a fan-and-pad polyhouse can reduce a May afternoon of 43.1°C to about 33°C inside.
- NHB route
- Projects above 2,500 m²
- MIDH / NHM route
- Up to 4,000 m² per farmer
- Cost norms here
- General area
- Structure for this climate
- NVPH or fan & pad

Start with scheme, area and finance—not fabrication
MIDH/NHM and NHB both provide assistance at 50% of the applicable cost norm, but they are not the same route. MIDH is the state-mission route for individual farmers, groups and FPOs, with assistance up to 4,000 m² per beneficiary. In Vadodara, apply through the district horticulture office.
NHB is intended for commercial projects above 2,500 m². It is credit-linked and back-ended: a term loan is needed, and the subsidy is credited into that loan account after completion and inspection. NHB guidelines state a ceiling of ₹56 lakh per project, but the current limit and admissible norms should be confirmed before filing.
This creates an important planning point for a 2,500–4,000 m² project: it may fall within MIDH’s area limit while also being above NHB’s commercial-project threshold. Do not assume the better route from subsidy percentage alone, since both use 50% assistance at admissible norms. Ask the Vadodara district horticulture office about the current MIDH process, and discuss loan eligibility with the bank if evaluating NHB.
- Up to 4,000 m² per beneficiary: MIDH/NHM state-mission route.
- Above 2,500 m²: NHB commercial-project route, with bank term loan.
- For NHB, In-Principle Approval (IPA) must be obtained before work starts.
- Vadodara is not under the hilly or North-East norms.
| MIDH / NHM (state mission) | NHB commercial project | |
|---|---|---|
| Who it is for | Individual farmers, groups, FPOs | Commercial projects: farmers, companies, FPOs, entrepreneurs |
| Project size | Up to 4,000 m² per beneficiary | Above 2,500 m² (1,000 m² in the North-East) |
| Assistance | 50% of cost, up to the cost norm | 50% of project cost at admissible norms, credit-linked and back-ended |
| Ceiling | Area limit per beneficiary | ₹56 lakh per project in the NHB scheme guidelines; check the current limit |
| Bank loan | Not always needed | Needed: subsidy is credited to the term loan |
| Apply at | the Vadodara district horticulture office | NHB online portal (In-Principle Approval) and your bank |
Choose a structure for Vadodara’s heat, monsoon and crop
Vadodara has a demanding pre-monsoon summer. May averages 43.1°C in the afternoon, with strong sun of 7.5 kWh/m²/day. July to September are humid months; July receives 331 mm rain and August 306 mm, with humidity of 80% and 86% respectively. A structure must therefore keep monsoon rain off the crop while allowing usable ventilation.
For many vegetable growers, a naturally ventilated polyhouse is the usual first choice. Its film roof protects the crop from rain, while roof vents and roll-up curtains move air without power. It suits an operation built around cucumber or high-value vegetables, provided the crop calendar and ventilation management are planned for the hot months.
A fan-and-pad polyhouse is the stronger option where the business case depends on production in severe heat or on leafy greens. Exhaust fans draw air through wet pads; in May, this can bring a 43°C afternoon to about 33°C inside. It has a higher cost norm, so it should be chosen for a crop and market plan that can use that added control. Nethouses are seasonal options: October to February is the more suitable nethouse period because rainfall is low. A curved nethouse provides greater height and air for taller crops, while a square nethouse follows the 4 × 4 m flat-grid nursery design.

Naturally ventilated polyhouse
Best fitFilm roof keeps monsoon rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Vadodara.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 43°C afternoon down to about 33°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from October to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
A one-acre NHB example: read the norm separately from the quote
The worked example below uses 3,952 m², about one acre, and a fan-and-pad polyhouse. At the applicable structure cost norm of ₹1,400 per m², the eligible structure cost is ₹55,32,800. For high-value vegetables, the planting-material norm is ₹140 per m², or ₹5,53,280 for this area.
Together, the eligible project cost in this illustration is ₹60,86,080. Fifty percent of that norm is ₹30,43,040 (₹30.43 lakh), shown as the maximum subsidy at 50% of the norm. This is an indicative calculation, not a sanction amount. The approved project, current norms and inspection determine the final eligible assistance.
The example also lists our material price this week at ₹32,48,775 including GST, or ₹822/m². That is an ex-factory material price without freight or erection; it is not the subsidy-eligible project cost. Keep this distinction clear when comparing a supplier quotation, a DPR and the department’s admissible cost.
| Item | Amount |
|---|---|
| Structure | Fan and pad polyhouse |
| Area | 3,952 m² (about one acre) |
| Structure cost norm | ₹1,400 per m² |
| Eligible structure cost | ₹55,32,800 |
| Planting material norm (high-value vegetables) | ₹140 per m² → ₹5,53,280 |
| Eligible project cost | ₹60,86,080 |
| Maximum subsidy at 50% of the norm | ₹30,43,040 (₹30.43 lakh) |
| Our material price this week (incl. GST) | ₹32,48,775 (₹822/m²) |
Planting material and crop plan: match the protected crop to the market
For NHB project planning, high-value vegetables have a planting-material norm of ₹140 per m². This group suits Vadodara and includes coloured capsicum, parthenocarpic cucumber, lettuce and leafy greens. Gerbera and rose are also listed as suitable crop choices under the flower groups, whereas orchid and anthurium are less suited.
Market timing should influence the crop plan, but past mandi prices are not a promise of future prices. Vadodara district data covers four markets, including Padra APMC and Vadodara(Sayajipura) APMC. Cucumber’s average modal price was ₹2,216 per quintal, with the highest recorded month in June at ₹2,736 and the lowest in March at ₹1,545. That makes crop scheduling, quality and harvest flow more important than choosing only on a single high-price month.
For vegetable rotation and local sale planning, green chilli recorded its high month in July at ₹4,626 per quintal, tomato in August at ₹2,953, and bhindi in December at ₹4,192. Winter market peaks in the data include cabbage, cauliflower, bottle gourd and brinjal in November. These are mandi observations over the last two years, so use them to study seasonality alongside your buyer, grading and transport plan.
| Crop group | NHB norm | Suits Vadodara? |
|---|---|---|
| High-value vegetables | ₹140 per m² | Yes: Coloured capsicum, Cucumber (parthenocarpic), Lettuce and leafy greens |
| Orchid and anthurium | ₹700 per m² | Less suited |
| Carnation and gerbera | ₹610 per m² | Yes: Gerbera and rose |
| Rose and lilium | ₹426 per m² | Yes: Gerbera and rose |
Use the district horticulture route correctly
For MIDH, take the proposed area, crop and structure plan to the Vadodara district horticulture office before any construction decision. The application route is through that office, which is especially relevant for an individual farmer or FPO planning within the 4,000 m² beneficiary limit.
For an NHB project, first prepare the detailed project report and obtain In-Principle Approval on the NHB portal. IPA is required before work starts. Then obtain term-loan sanction from the bank. Because the assistance is back-ended, the eventual NHB subsidy goes to the loan account after the completed project is inspected.
Do not start foundations, erect the structure or place work that can be treated as project commencement before IPA in the NHB route. A quotation is useful for application, but it is not approval. Build only to the approved design and retain the material records needed for inspection.
- Select structure and area according to climate, crop and scheme route.
- Obtain an itemised quotation; prepare a DPR with costs, crop plan and cash flow for NHB.
- Apply before building: MIDH at the district horticulture office, NHB through the portal for IPA.
- After sanction, build to the approved standard, complete inspection and follow the relevant release process.
- 1
Pick the structure and size
Match it to Vadodara's climate (see above) and your market. Keep under 4,000 m² for MIDH, or above 2,500 m² for an NHB project.
- 2
Get a quotation and project report
An itemised supplier quotation with HSN codes, and for NHB a detailed project report (DPR) with costs, crop plan and cash flow.
- 3
Apply before you build
MIDH: apply at the Vadodara district horticulture office. NHB: file for In-Principle Approval on the NHB portal; NHB has required IPA before work starts since 2017.
- 4
Bank loan (NHB)
Get the term loan sanctioned. The subsidy is back-ended: it is paid into the loan account after the project is complete.
- 5
Build to standard
Build with BIS-standard material and keep every test certificate and invoice: inspectors check the structure against the approved design.
- 6
Inspection and release
After a joint inspection, the subsidy is released to your bank (NHB) or to you (MIDH, as per the state process).

Documents that prevent delays at application and inspection
Prepare land and identity papers before seeking a quotation or loan. In Gujarat, the land record set is the 7/12 and 8A extracts in the applicant’s name, or a registered lease, along with a site map. Also keep Aadhaar, PAN and bank details. Companies and FPOs need their registration papers.
For the technical file, obtain soil and water test reports and an itemised supplier quotation showing specifications, HSN codes, sizes and quantities. An NHB application additionally needs a detailed project report and bank sanction letter. After purchase, preserve the material invoices and test certificates because inspectors compare the installed structure with the approved design and records.
Polyhouse Constructions is a manufacturer, a venture of Kryzen Biotech Pvt Ltd, supplying kits and individual material from its Degaon, Satara factory. Its kits can include GI structure, polyfilm, nets and fittings. Construction or erection is done by Kryzen Biotech’s construction team, not by a Vadodara office. The supplied documentation can include an itemised quotation, lab test certificates and technical data sheets; GI structure has a 15-year manufacturing warranty, polyfilm 2.5 years and nets 3 years.
- Land records in your name (in Gujarat: 7/12 and 8A extracts), or a registered lease, with a site map
- Aadhaar, PAN and bank details; for companies and FPOs, registration papers
- Soil and water test report
- Supplier quotation with HSN codes and specifications
- Detailed project report and bank sanction letter (NHB)
- Test certificates and invoices for the material, after purchase

Itemised quotation
Every item with size, quantity, HSN code and GST, ready to attach to the application.

Lab test certificates
Tensile, chemical, salt spray and other tests on the steel, by third-party labs.

ISI-marked GI
GI pipes from Tata, Jindal or JSW steel, with a 15-year warranty.
Avoid the errors that make a subsidy project difficult
The most expensive mistake is treating NHB IPA as a formality and beginning work before it is granted. The second is selecting a structure merely because its cost norm is lower, without considering May heat, monsoon humidity, the intended crop and whether the farm can operate fans and pads where needed.
Do not mix up the cost norm, the supplier’s material price, freight, erection and the sanctioned eligible project cost. The one-acre example shows why these are separate figures. Similarly, do not assume a planting-material norm applies to every crop group: high-value vegetables, orchids/anthurium and flower groups have different listed norms.
Finally, do not use a vague quotation or substitute material after approval without checking implications. Ask for specifications, HSN codes, invoices, test certificates and a design that can be checked at inspection. Polyhouse Constructions uses in-house engineering and manufacturing, a 32-point QA checklist, and dispatches lab test certificates and technical data sheets; weekly GI and plastic rates are updated every Friday.
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | 30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | 15-year manufacturing warranty | Rarely a written warranty |
| Engineering | In-house engineering team | No design or load checks |
| Manufacturing | In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | 32-point QA checklist for every part | Visual check at best |
| Lab certificate | Lab test certificate with every dispatch | Not provided |
| Technical sheet | Technical data sheet for every product | Not available |
| Material match | Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | Backed by industry leader Kryzen Biotech | Single-owner workshop |
Order material only after the approved project is clear
Once the scheme route, approved drawing and finance are in place, material can be planned as a complete kit or as individual items. The available material options cover naturally ventilated polyhouse components, nethouse material and protected-cultivation equipment. A kit built online shows every item, quantity and that week’s rate, which helps reconcile the quotation with the project file.
Material is supplied from the Satara factory; there is no Polyhouse Constructions office in Vadodara. Delivery is estimated at 3 days after dispatch for Vadodara. Booking is with 5% advance and 95% before dispatch. For subsidy work, align dispatch and erection with the approved project sequence and retain every invoice.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Should I apply under MIDH or NHB for a Vadodara polyhouse?
MIDH is the state-mission route with assistance up to 4,000 m² per beneficiary, applied for through the Vadodara district horticulture office. NHB is for commercial projects above 2,500 m² and requires a bank term loan, with the subsidy back-ended into that loan account.
Can I begin construction while my NHB application is being processed?
No. NHB requires In-Principle Approval before work starts. Obtain IPA on the NHB portal first, then proceed with the term loan and approved project execution.
Which polyhouse works best in Vadodara’s summer?
A naturally ventilated polyhouse is usually the first choice because it keeps monsoon rain off crops and provides passive air movement. For production requiring stronger cooling in May, a fan-and-pad polyhouse can reduce a 43°C afternoon to about 33°C inside.
What planting-material norm can I use for cucumber or coloured capsicum?
Cucumber and coloured capsicum fall within the high-value vegetables group, for which the listed NHB planting-material norm is ₹140 per m². The final eligible amount depends on the approved project and current norms.
What papers should I carry to the horticulture office or bank?
Carry 7/12 and 8A extracts or a registered lease with site map, Aadhaar, PAN, bank details, soil and water reports, and an itemised quotation with specifications and HSN codes. For NHB, also prepare the DPR and bank sanction letter; retain invoices and test certificates after purchase.
Subsidy projects near Vadodara
The same guide for nearby towns, with the structure that suits each.
| Town | From Vadodara | District | Cost norms | Suits |
|---|---|---|---|---|
| Subsidy project in Padra | ~20 km | Vadodara | General | NVPH or fan & pad |
| Subsidy project in Anand | ~50 km | Anand | General | NVPH or fan & pad |
| Subsidy project in Petlad | ~60 km | — | General | NVPH or fan & pad |
| Subsidy project in Umreth | ~60 km | Anand | General | NVPH or fan & pad |
| Subsidy project in Nadiad | ~70 km | Kheda | General | NVPH or fan & pad |
| Subsidy project in Rajpipla | ~70 km | Narmada | General | NVPH or fan & pad |
Sources
- NHB cost norms for protected cultivation
- NHB scheme guidelines (commercial horticulture)
- Mission for Integrated Development of Horticulture
- Kryzen: Polyhouse construction in Vadodara
- Kryzen: Polyhouse farming in Vadodara
- NASA POWER monthly climate averages for Vadodara
- Agmarknet daily prices (data.gov.in)
