Equipment · Vadodara district, Gujarat
Protected cultivation equipment for Vadodara farms
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
Vadodara needs protected-cultivation equipment that can handle a very hot, bright May, heavy July–September humidity and rain, and cool January nights. Polyhouse Constructions manufactures complete material kits and individual equipment from its Satara factory; Kryzen Biotech’s construction team carries out erection.
- Pad cooling
- Works: ~33°C inside
- Humid months
- 3
- Shading need
- High
- Delivery
- ~3 days

Start with Vadodara’s actual weather load
The main design problem is not one season alone. May has an average afternoon high of 43.1°C and 7.5 kWh/m²/day of sun, while July brings about 331 mm rain. Humidity then rises to 80% in July, 86% in August and 83% in September. Equipment therefore has to cool the house in summer, move humid air during the monsoon, provide rain drainage, and still allow controlled ventilation.
January nights average 11.7°C, but the equipment priority for this climate is not additional night heating. A naturally ventilated house or nethouse is most comfortable to operate from October to February, when the local nethouse season falls. For a crop planned through the hot period, shading and dependable ventilation should be decided before selecting only the frame or cover.
- April: 41.8°C average high, 7.3 kWh/m²/day sun.
- May: 43.1°C average high, 7.5 kWh/m²/day sun.
- July: 331 mm rain and 80% humidity.
- August: 306 mm rain and 86% humidity.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 29.4°C | 11.7°C | 34% | 1 mm | 4.7 | 2 |
| Feb | 33.2°C | 14.6°C | 28% | 2 mm | 5.6 | 2 |
| Mar | 37.8°C | 19.2°C | 25% | 4 mm | 6.6 | 2 |
| Apr | 41.8°C | 23.7°C | 28% | 3 mm | 7.3 | 2.4 |
| May | 43.1°C | 27°C | 37% | 4 mm | 7.5 | 3.6 |
| Jun | 37.8°C | 27.6°C | 59% | 143 mm | 5.9 | 4.2 |
| Jul | 32.3°C | 25.5°C | 80% | 331 mm | 4.2 | 3.8 |
| Aug | 30.5°C | 24.4°C | 86% | 306 mm | 3.9 | 3.1 |
| Sep | 31.2°C | 23.8°C | 83% | 152 mm | 4.8 | 2 |
| Oct | 32.8°C | 20.5°C | 66% | 15 mm | 5.5 | 1.3 |
| Nov | 31.8°C | 16.4°C | 52% | 4 mm | 4.7 | 1.5 |
| Dec | 29.7°C | 12.9°C | 42% | 2 mm | 4.3 | 1.8 |
Equipment priorities for a Vadodara polyhouse
For a naturally ventilated polyhouse (NVPH), use a roof vent and roll-up side curtains with side insect net so that hot or humid air has a route out. The Manual Gear Roll Up Curtain Unit is ₹1,050 per piece + GST, Curtain Pipe (27X2.0X6000) is ₹758 per piece + GST, Side Insect Net (5.2 m) is ₹221 per metre + GST, and a Curtain Clamp 0.75" is ₹11 per piece + GST.
May sun makes an internal shade option worth considering. White Shade Net 50% is ₹27 per metre + GST; the reflective Aluminium Shade Net (4 m) is ₹315 per metre + GST. White diffused 250-micron polyfilm (4.5 m), used on NVPH and fan-and-pad houses, is ₹254 per metre + GST. Select the system according to crop cycle and the level of temperature control required, rather than assuming one cover suits every crop.
- Cooling: exhaust fans and cellulose pads for high-temperature production.
- Air movement: roof vents and curtains, with circulation fans as an optional upgrade in NVPH.
- Shading: aluminium or double-layer net for the May sun peak.
- Rain: gutters are needed for the July rainfall.
- Nights: no extra equipment need is identified for Vadodara.
| Need | For Vadodara | Why |
|---|---|---|
| Cooling | Exhaust fans + cellulose pads | Pads bring 43°C to ~33°C in May |
| Air movement | Roof vent + curtains | Humid from July to September |
| Shading | Aluminium or double-layer net | Sun peaks at 7.5 kWh/m² in May |
| Rain | Standard gutters | July: ~331 mm |
| Nights | No extra need | — |
Does fan-and-pad cooling make sense here?
Yes, fan-and-pad cooling has a clear climate use in Vadodara if the crop needs active temperature reduction through May. The available local climate figure indicates that pads can bring a 43°C May condition to about 33°C inside. That is a meaningful reduction, but whether it pays for a particular farm depends on the crop, cropping calendar, market timing and the cost of operating the system; it is not a promise of profit.
For reference, a 52 × 76 m fan-and-pad house is 3,952 m² and uses 12 exhaust fans and 82 cellulose pads in the sizing example. Its material including GST is ₹32,48,775. This figure is a sizing example, not a quote for every site. A complete design should match the actual house dimensions and crop requirement.
- Exhaust Fan: ₹22,700 per piece + GST.
- Cellulose Pad (600X150X1800): ₹2,616 per piece + GST.
- Aluminium Pad Frame (150 mm): ₹815 per metre + GST.
- Air Circulation Fan: ₹8,999 per piece + GST; optional in NVPH and fan-and-pad houses.
- Fan & pad house, 52 × 76 m
- 3,952 m²
- Exhaust fans
- 12 nos
- Cellulose pads
- 82 nos
- Material incl. GST
- ₹32,48,775
Rain, covering and entry items to specify
With 967 mm annual rain and the heaviest rain in July, do not treat drainage as an add-on. GI Gutter Sheet is ₹335 per metre + GST and Gutter Funnel is ₹1,350 per piece + GST for NVPH and fan-and-pad systems. The Side Skirting Apron (1.5 m), used across polyhouse and nethouse systems, is ₹64 per metre + GST. Gutters and funnels need to remain clear before the monsoon rather than after water begins collecting.
A material kit can include the GI structure, polyfilm, nets and fittings for NVPH, fan-and-pad polyhouses, square nethouses or curved nethouses. For access, an Aluminium Door is ₹3,250 per piece + GST and a Fibre Door is ₹2,050 per piece + GST. Entry Cabin Pipe (33X2.0X6000), used with NVPH, fan-and-pad and curved nethouse systems, is ₹913 per piece + GST.
- Clamps 60 mm Full: ₹17 per piece + GST.
- Aluminium Profile: ₹27 per metre + GST.
- GI Spring: ₹6 per metre + GST.
- Four Way Pipe Coupler (48 OD): ₹130 per piece + GST for square nethouses.
Match crop timing with the local markets
Protected cultivation should be planned with selling months in view, not only with the growing environment. Vadodara district has four recorded markets for the listed crops, including Padra APMC and Vadodara(Sayajipura) APMC. The recent two-year mandi data show strong seasonal differences, so check the current market and crop condition before making a production decision.
For example, cucumber’s average modal price is ₹2,216/q and its recorded high is ₹2,736 in June, when weather management becomes harder. Green chilli’s average is ₹3,171/q, with a recorded high of ₹4,626 in July. Tomato reached ₹2,953 in August but its recorded low is ₹659 in March. Winter-oriented planning may also examine November highs for cabbage at ₹1,717/q, cauliflower at ₹2,624/q, bottle gourd at ₹1,829/q and brinjal at ₹2,572/q. These are mandi observations, not future price forecasts.
- Okra (bhindi): average ₹3,113/q; recorded high ₹4,192 in December.
- Coriander leaves: average ₹3,142/q; recorded high ₹5,754 in July.
- Spinach: average ₹1,578/q; recorded high ₹2,434 in July.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Cabbage | 4 | ₹1,124/q | Nov (₹1,717) | Mar (₹394) |
| Green chilli | 4 | ₹3,171/q | Jul (₹4,626) | Sep (₹1,947) |
| Tomato | 4 | ₹1,876/q | Aug (₹2,953) | Mar (₹659) |
| Cauliflower | 4 | ₹1,998/q | Nov (₹2,624) | Mar (₹1,140) |
| Bottle gourd | 4 | ₹1,437/q | Nov (₹1,829) | May (₹1,014) |
| Brinjal | 4 | ₹1,685/q | Nov (₹2,572) | Mar (₹809) |
| Spinach | 4 | ₹1,578/q | Jul (₹2,434) | Jan (₹659) |
| Cucumber | 4 | ₹2,216/q | Jun (₹2,736) | Mar (₹1,545) |
| Coriander (leaves) | 4 | ₹3,142/q | Jul (₹5,754) | Jan (₹1,181) |
| Okra (bhindi) | 4 | ₹3,113/q | Dec (₹4,192) | May (₹2,054) |
A maintenance calendar tied to the season
Before May, wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust-fan belt and shutter before the 43°C peak. Also inspect shade arrangement and make sure curtains operate before the hot, dry period rather than waiting for stress symptoms in the crop.
Before July, clear gutters and funnels, re-seat the side skirting apron and check film tension. During July to September, run air-circulation fans in the mornings, grease curtain gear units and check insect net for tears. This is the period when humid air can contribute to fungal disease and pest pressure. From October to February, tighten clamps and bolts, inspect GI springs in aluminium profiles, and order replacement film or net before the next operating season.
- 1
Before May
Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 43°C peak.
- 2
Before July
Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 331 mm.
- 3
July to September
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 4
October to February
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Material quality, tests and written warranty
Polyhouse Constructions is a venture of Kryzen Biotech Pvt Ltd and manufactures protected-cultivation structures and material in India. GI pipes are ISI-marked branded steel from Tata, Jindal and JSW. Parts are manufactured in-house, cut and drilled to drawing, with a 32-point QA checklist, a technical data sheet for every product and a lab test certificate with dispatch.
For the humid monsoon months, ask for the supplied test documentation and retain it with the material list. The quality documentation covers tensile strength of GI pipe steel through a third-party laboratory, salt-spray corrosion resistance and chemical analysis of steel composition. Warranty is 15 years on the GI structure, 2.5 years on polyfilm and 3 years on shade and insect nets.

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Vadodara.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Ordering kits, replacement parts and delivery to Vadodara
A farmer can build a complete kit online at polyhouseconstructions.com and see each item, quantity and that week’s rate. Prices follow weekly GI and plastic rates and are updated every Friday; therefore, the listed item prices should be checked again while ordering. A 5% bulk discount applies on 10 or more units of an item. Booking is with 5% advance and 95% before dispatch.
Material is supplied from the Degaon factory on the Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra, not from an office in Vadodara. Delivery to Vadodara is stated as 3 days after dispatch. Fans, pads, nets and fittings are also available individually at the weekly rate for repairs or extensions. For construction rather than material supply alone, Kryzen Biotech’s construction team handles erection.
- Nearby farming locations include Padra, 20 km away; Anand, 50 km; Petlad and Umreth, 60 km each; and Nadiad, 70 km.
- Confirm any subsidy eligibility and current norms with the Gujarat state horticulture department before starting work.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
What protected-cultivation system is suitable for Vadodara’s May heat?
For crops that need active cooling during the 43.1°C May average high, fan-and-pad equipment is the relevant option; pads can bring this condition to about 33°C inside. NVPH with roof ventilation, curtains and shade is another system choice where the crop and production period can work with natural ventilation.
Why are gutters important in a Vadodara polyhouse?
July averages about 331 mm rain, while August averages 306 mm. GI Gutter Sheet and Gutter Funnel are used in NVPH and fan-and-pad systems to manage roof runoff, and they should be cleaned before July.
Can I buy only a fan, net or spare fitting?
Yes. Every fan, pad, net and fitting is sold individually at the weekly rate for repairs and extensions. The online material list also shows individual item quantities and the current week’s rate.
What warranty comes with the structure and covering?
The GI structure has a 15-year manufacturing warranty. Polyfilm has a 2.5-year warranty, while shade and insect nets have a 3-year warranty.
How quickly can equipment be delivered to Vadodara?
The stated delivery time is 3 days after dispatch to Vadodara. Material is supplied from the Satara factory, and construction or erection is done by Kryzen Biotech’s construction team.
Equipment supply near Vadodara
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Vadodara | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Padra | ~20 km | Works (~33°C) | 3 | May, 42°C |
| Equipment supplier in Anand | ~50 km | Works (~33°C) | 3 | May, 43°C |
| Equipment supplier in Petlad | ~60 km | Works (~33°C) | 3 | May, 43°C |
| Equipment supplier in Umreth | ~60 km | Works (~33°C) | 3 | May, 43°C |
| Equipment supplier in Nadiad | ~70 km | Works (~33°C) | 3 | May, 43°C |
| Equipment supplier in Rajpipla | ~70 km | Works (~33°C) | 3 | May, 42°C |



