Polyhouse material · Gujarat
Polyhouse Material Supplier in Petlad
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
This page is for farmers in Petlad who want polyhouse material from the manufacturer rather than through a dealer. We make the GI structure at our Satara factory and send the film, nets and fittings with it, so your order is one list and one invoice. Petlad is about 670 km away; expect delivery in about 3 days after dispatch.
- Distance from factory
- ~670 km by road
- Delivery after dispatch
- ~3 days
- Hottest month
- May, ~43°C
- Climate pick
- NVPH + fan & pad
Polyhouse systems we supply in Petlad
Each kit comes with the full GI structure, covering and fittings. Here is how each one suits Petlad's climate.

Naturally ventilated polyhouse
Best fitFilm roof keeps monsoon rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Petlad.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 43°C afternoon down to about 33°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from October to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
Plants you can grow in Petlad
Picked for Petlad's weather: May highs of about 43°C and 843 mm of rain a year.

Coloured capsicum
NVPH
Grow under shade net through May, when highs reach 43°C.

Cucumber (parthenocarpic)
NVPH
Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Lettuce and leafy greens
Fan & pad polyhouse
Pads bring May afternoons down to about 33°C, so greens can grow through summer.

Gerbera and rose
NVPH
Cut flowers with year-round demand from city florists and events.
🌱 Vegetable seedlings
Square nethouse
Raise nursery seedlings from October to February for the local planting season.
Polyhouse Construction vs a local fabricator in Petlad
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | ✓30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | ✓Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | ✓15-year manufacturing warranty | Rarely a written warranty |
| Engineering | ✓In-house engineering team | No design or load checks |
| Manufacturing | ✓In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | ✓32-point QA checklist for every part | Visual check at best |
| Lab certificate | ✓Lab test certificate with every dispatch | Not provided |
| Technical sheet | ✓Technical data sheet for every product | Not available |
| Material match | ✓Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | ✓Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | ✓Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | ✓Backed by industry leader Kryzen Biotech | Single-owner workshop |
Petlad's growing year at a glance
Plan film, shading and planting around these months. Open-mesh nethouses work best from October to February; keep curtains and vents ready for the humid stretch from July to September.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~43°C highs | ||||||||||||
| Strongest sun | 7.4 kWh/m²/day | ||||||||||||
| Wettest month | ~284 mm | ||||||||||||
| Humid (75%+) | July–September | ||||||||||||
| Nethouse season | October–February |
From NASA POWER monthly averages for Petlad.
Choosing polyhouse material for Petlad's weather
For Petlad, the numbers that shape the material list are May afternoons of about 43°C (39% humidity), roughly 843 mm of rain a year with July the wettest month.
| Part | What we supply | Why in Petlad |
|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Sunlight peaks in May at about 7.4 kWh per m² a day; diffused film spreads it and cuts leaf scorch. |
| Shading | Aluminium (reflective) shade net | 43°C highs and strong sun: a reflective net sends heat back out instead of holding it inside. |
| Gutters | GI gutter sheet with funnels | About 843 mm of rain a year, so standard gutters are enough. |
| Ventilation | Roll-up side curtains, side insect net | Humid spell from July to September; open the curtains fully in those months. |
Mandi price seasons around Petlad
We averaged two years of daily Agmarknet prices from 12 markets in nearby districts (Anand, Kheda, Vadodara, Ahmedabad) for crops that are grown under cover. Tomato swings the most: about ₹2,850 per quintal in December against ₹686 in March, a 315% difference. Bottle gourd is the steadiest, which makes it a safer second crop.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Tomato | 22 | ₹1,916/q | Dec · ₹2,850 | Mar · ₹686 | 315% |
| Brinjal | 20 | ₹1,814/q | Nov · ₹2,915 | Mar · ₹878 | 232% |
| Cauliflower | 20 | ₹1,951/q | Aug · ₹2,640 | Mar · ₹1,152 | 129% |
| Bottle gourd | 20 | ₹1,340/q | Nov · ₹1,783 | Mar · ₹935 | 91% |
| Okra (bhindi) | 21 | ₹3,141/q | Dec · ₹4,405 | May · ₹2,158 | 104% |
| Cabbage | 20 | ₹1,153/q | Nov · ₹1,800 | Mar · ₹529 | 240% |
| Green chilli | 14 | ₹3,180/q | Jul · ₹4,701 | Sep · ₹1,883 | 150% |
| Coriander (leaves) | 14 | ₹2,343/q | Jul · ₹4,137 | Feb · ₹1,211 | 242% |
Timing your crop for the Petlad market
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in December; at about 75 days to first harvest, transplant in September.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Tomato | Aug, Nov, Dec | ~75 | September | Mar |
| Brinjal | Nov, Dec | ~60 | September | Mar |
| Cauliflower | Jul, Aug, Sep, Nov | ~75 | May | Mar |
| Bottle gourd | Sep, Nov | ~55 | September | Mar |
| Okra (bhindi) | Jan, Dec | ~45 | October | May |
| Cabbage | Jul, Nov | ~75 | August | Mar |
| Green chilli | Jul | ~75 | April | Sep |
| Coriander (leaves) | Jul | ~35 | May | Feb |
Petlad month by month
May is the hottest month, with afternoons around 42.6°C; January nights drop to about 11.9°C. July is the wettest (284 mm of 843 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 28.7°C | 11.9°C | 37% | 1 mm | 4.6 | 2.1 |
| Feb | 32.4°C | 14.7°C | 31% | 1 mm | 5.5 | 2.1 |
| Mar | 37°C | 19.4°C | 29% | 4 mm | 6.5 | 2.1 |
| Apr | 41.1°C | 23.9°C | 31% | 3 mm | 7.2 | 2.4 |
| May | 42.6°C | 27°C | 39% | 4 mm | 7.4 | 3.4 |
| Jun | 37.8°C | 28°C | 58% | 125 mm | 6 | 4.1 |
| Jul | 33°C | 25.9°C | 77% | 284 mm | 4.3 | 3.8 |
| Aug | 31.3°C | 24.7°C | 83% | 264 mm | 4.3 | 3.1 |
| Sep | 32°C | 24.2°C | 80% | 140 mm | 5 | 2.1 |
| Oct | 33.2°C | 21.3°C | 64% | 12 mm | 5.4 | 1.5 |
| Nov | 31.6°C | 17.1°C | 52% | 4 mm | 4.6 | 1.7 |
| Dec | 29.1°C | 13.2°C | 44% | 1 mm | 4.3 | 2 |
Polyhouse subsidy for Petlad farmers
Under the Mission for Integrated Development of Horticulture (MIDH), farmers in Gujarat can get 50% of the government cost norm for naturally ventilated polyhouses (₹1,000–1,200 per m²), fan and pad polyhouses (₹1,500–1,800 per m²) and nethouses (₹710 per m²), on up to 2,500 m² per farmer. The subsidy is worked out on the government cost norm for your structure and size, not on your bill.
Commercial projects above 2,500 m² can apply to the National Horticulture Board for a credit-linked subsidy of 50% of the eligible project cost, up to ₹100 lakh per project. Both schemes want materials that meet BIS standards: our GI pipes carry the ISI mark and test reports ship with every order. Apply through the Gujarat horticulture department or your district horticulture officer before you buy.
Delivery to Petlad
Petlad is about 670 km by road from our factory at Degaon, Satara, on the Pune–Bangalore highway. Once your order is packed, the truck usually reaches Petlad in about 3 days, with the invoice and test reports.
Every load travels with 100% invoice insurance. Send your delivery PIN code with the order and we confirm the vehicle before dispatch.
Get polyhouse material from India's biggest CEA manufacturing company
Choose your structure and size, and get the complete material list in a minute.
FAQs
Do you deliver polyhouse material to Petlad?
Yes. We dispatch from our factory at Degaon, Satara, about 670 km from Petlad by road, and the truck usually arrives in about 3 days. Every load is insured for the invoice value.
Which polyhouse suits Petlad?
A naturally ventilated polyhouse for vine crops, and fan and pad cooling if you grow greens through May: the air is dry enough for pads to bring 43°C down to about 33°C.
Is there a subsidy for polyhouse material in Gujarat?
Yes. NHM / MIDH pays 50% of the cost norm on up to 2,500 m² per farmer, and NHB gives a 50% credit-linked subsidy for projects above 2,500 m². Apply before buying; we provide the quotation, ISI-marked material and test reports the claim needs.
What warranty do the materials carry?
GI pipes carry a 15-year warranty, polyfilm 2.5 years and nets 3 years.
Can I buy only a few items, like film or nets?
Yes. Use Buy individual items to order film, nets, fittings or pipes on their own, for repairs or an extension.
Can you also build the polyhouse in Petlad?
Yes. Kryzen Biotech's construction team builds polyhouses and nethouses across India, including Gujarat. See the link to polyhouse construction in Petlad below.
Polyhouse material near Petlad
Supplying a farm outside Petlad? These nearby towns, with their own weather, are on the same delivery route.
| Town | From Petlad | Hottest month | Rain a year | Suits |
|---|---|---|---|---|
| Polyhouse material in Anand | ~20 km | May, 43°C | 967 mm | NVPH + fan & pad |
| Polyhouse material in Khambhat | ~30 km | May, 43°C | 843 mm | NVPH + fan & pad |
| Polyhouse material in Nadiad | ~30 km | May, 43°C | 967 mm | NVPH + fan & pad |
| Polyhouse material in Mahemdabad | ~50 km | May, 44°C | 770 mm | NVPH + fan & pad |
| Polyhouse material in Padra | ~50 km | May, 42°C | 1,131 mm | NVPH + fan & pad |
| Polyhouse material in Umreth | ~50 km | May, 43°C | 967 mm | NVPH + fan & pad |
Want it built as well? Read about polyhouse construction in Petlad on the Kryzen blog.
