Polyhouse material · Pune district, Maharashtra
Polyhouse material supplier for farms in Pune
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
For most Pune farms, a naturally ventilated polyhouse is the practical starting structure: its film roof protects crops through the June–October humid monsoon, while roof vents and roll-up curtains provide passive air movement. Polyhouse Constructions manufactures complete, climate-matched material kits at Degaon, Wai in Satara; dispatches delivered to Pune take 1 day after dispatch.
- Distance from factory
- ~80 km by road
- Delivery after dispatch
- Next day
- Hottest month
- April, ~38°C
- Climate pick
- NVPH + fan & pad

Start with a structure that handles Pune’s rain as well as heat
Pune has two very different protected-cultivation periods to plan for. April is the hottest and brightest month, with an average afternoon high of 37.8°C and 7.1 kWh/m²/day of sun. Then the monsoon brings 1,730 mm of annual rain: July alone averages 515 mm, and humidity remains 75% or above from June to October.
A naturally ventilated polyhouse (NVPH) is usually the first choice here. Its polyfilm roof keeps direct rain off the crop during the wet period, and its roof vents plus roll-up side curtains move air without power. This combination suits a farm that needs crop protection during the monsoon but also needs ventilation in warm months.
A fan & pad polyhouse is worth considering where summer production of leafy greens is the aim and the farm is set up to operate fans and wet pads. In April, a 38°C afternoon can be brought down to about 30°C inside. That can make summer growing conditions more workable for greens. A square or curved nethouse is a seasonal, lower-covered option rather than a monsoon substitute; Pune’s suitable nethouse period is November to February, when rainfall is low.
- Choose NVPH for an all-season rain-protected vegetable or flower structure.
- Choose fan & pad when controlled summer cooling is central to the crop plan.
- Use a square nethouse for nursery seedlings, or a curved nethouse for taller crops, chiefly from November to February.

Naturally ventilated polyhouse
Best fitFilm roof keeps June–October rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Pune.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In April that can take a 38°C afternoon down to about 30°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from November to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in April.
The Pune climate should change the material specification
A kit should not be just a frame and a cover selected by size. Pune’s high April sun, very wet July and humid June–October period affect the roof film, shading, drainage and ventilation details. The material-match table below shows the parts that address those conditions.
For the roof, we supply 250-micron white diffused, UV-stabilised polyfilm. Diffused film spreads the strong April light and helps reduce leaf scorch. Where shading is needed, aluminium reflective shade net is suited to the heat because it reflects heat outward rather than retaining it inside.
Rainwater handling deserves attention before erection. GI gutter sheets, a funnel at each gutter end and side skirting apron are supplied for a kit designed around the structure. With July rainfall averaging about 515 mm, the drainage arrangement should not be treated as an optional finishing item. During the humid months, roll-up side curtains with gear unit, side insect net and an entry cabin allow ventilation while helping control insect entry.
- GI structure made from ISI-marked branded steel from Tata, Jindal and JSW.
- White, green or black 50% shade net, aluminium reflective shade net, and side insect net are available according to the selected structure and crop.
- Fittings are counted to the design, along with the GI frame, film and nets in a complete kit.
| Part | What we supply | Why in Pune |
|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Sunlight peaks in April at about 7.1 kWh per m² a day; diffused film spreads it and cuts leaf scorch. |
| Shading | Aluminium (reflective) shade net | 38°C highs and strong sun: a reflective net sends heat back out instead of holding it inside. |
| Gutters | GI gutter sheet, a funnel at each gutter end, side skirting apron | July alone brings about 515 mm of rain; size the drains for that month. |
| Ventilation | Roll-up side curtains with gear unit, side insect net, entry cabin | Humidity stays at 75% or more from June to October; open sides and a double-door cabin keep air moving and pests out. |
Read the year before fixing crop and transplant dates
The month-by-month table below is useful when deciding whether the crop will face heat, rain or high humidity at a sensitive stage. March and April are hot and relatively dry: March averages 35.1°C by afternoon, rising to 37.8°C in April. June starts the wet period at 362 mm rain and 80% humidity; July, August and September remain especially humid, at 89%, 91% and 89% respectively.
That pattern is why an NVPH needs working roof ventilation and side curtains rather than a permanently closed envelope. It is also why a farm using a seasonal nethouse should plan its nursery or crop cycle around November, December, January and February, instead of expecting the same cover to protect the crop through the monsoon.
- April: peak heat and strongest sun.
- June–October: humid period, with rain protection and airflow both important.
- November–February: nethouse season in Pune.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 27.9°C | 11.8°C | 54% | 1 mm | 5 | 1.8 |
| Feb | 31.4°C | 14°C | 45% | 1 mm | 5.9 | 1.9 |
| Mar | 35.1°C | 17.4°C | 39% | 5 mm | 6.6 | 2.1 |
| Apr | 37.8°C | 20°C | 42% | 4 mm | 7.1 | 2.4 |
| May | 36.2°C | 21.4°C | 57% | 26 mm | 7 | 3.4 |
| Jun | 29.3°C | 22°C | 80% | 362 mm | 4.6 | 4.2 |
| Jul | 26.3°C | 21.5°C | 89% | 515 mm | 3.3 | 4.9 |
| Aug | 25.8°C | 20.9°C | 91% | 409 mm | 3.4 | 4.2 |
| Sep | 26.5°C | 20.2°C | 89% | 275 mm | 4.3 | 2.5 |
| Oct | 27.6°C | 18.2°C | 80% | 106 mm | 5 | 1.8 |
| Nov | 27.1°C | 15.1°C | 72% | 22 mm | 4.9 | 2 |
| Dec | 26.7°C | 12.6°C | 63% | 4 mm | 4.7 | 1.9 |
Crop choices and Pune district mandi timing
Crop selection should combine what the structure can protect with the months in which district-market prices have been stronger. The mandi data below covers markets in Pune district, including Pune (Manjri), Pune (Pimpri), Pune (Moshi), APMC Pune, APMC Khed, Khed (Chakan), Junnar (Narayangaon) and APMC Manchar. It is historical market information, not a promise of a future price.
For an NVPH, cucumber is a relevant protected-cultivation crop: its average modal price was ₹1,932/q across 31 markets, with the recorded high month in June at ₹2,402/q and low month in March at ₹1,573/q. Producing marketable cucumber for June still means managing the beginning of the rainy, humid period well. Bitter gourd similarly recorded its high month in June at ₹3,988/q, compared with an average of ₹3,175/q.
For late-year sales planning, brinjal had its high month in November at ₹3,655/q, cabbage ₹1,433/q in November and cauliflower ₹1,791/q in November. Okra recorded its high month in December at ₹4,371/q, and tomato ₹2,354/q in December. Green chilli’s high month was February at ₹4,903/q. These months can guide a backwards crop calendar, but planting should also match the crop variety, crop duration and the protection available.
- Cucumber: highest recorded month June; 31 markets.
- Brinjal, cabbage and cauliflower: highest recorded month November.
- Okra and tomato: highest recorded month December; green chilli: February.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Cabbage | 31 | ₹965/q | Nov (₹1,433) | Mar (₹600) |
| Cucumber | 31 | ₹1,932/q | Jun (₹2,402) | Mar (₹1,573) |
| Cauliflower | 31 | ₹1,326/q | Nov (₹1,791) | Mar (₹915) |
| Brinjal | 30 | ₹2,665/q | Nov (₹3,655) | Apr (₹1,828) |
| Bottle gourd | 29 | ₹1,782/q | Jul (₹2,061) | Mar (₹1,481) |
| Okra (bhindi) | 30 | ₹3,565/q | Dec (₹4,371) | Apr (₹2,797) |
| Green chilli | 30 | ₹4,071/q | Feb (₹4,903) | Sep (₹3,065) |
| Tomato | 27 | ₹1,592/q | Dec (₹2,354) | Mar (₹1,123) |
| Bitter gourd | 30 | ₹3,175/q | Jun (₹3,988) | Sep (₹2,551) |
| Coriander (leaves) | 24 | ₹463/q | May (₹741) | Aug (₹179) |
Build for the crop, not just for a low opening quote
A local fabricator may offer a familiar on-site option, but ask for the drawing, steel source, part list, load checks and written warranty before comparing quotes. A structure for Pune needs the correct mix of gutters, vents, curtains, covers and fittings; omissions can become visible only during the first heat or monsoon cycle.
Polyhouse Constructions is a manufacturer of protected-cultivation structures and material, a venture of Kryzen Biotech Pvt Ltd. We manufacture in-house at Degaon on the Pune–Bangalore Highway, Tal. Wai, Satara, rather than claiming a Pune office. Every dispatch has a lab test certificate, and every product has a technical data sheet. In-house engineering, a 32-point QA checklist and material counted per design help a farmer verify what is being supplied.
The warranties are 15 years on the GI structure, 2.5 years on polyfilm and 3 years on nets. The comparison table below lists the practical checks to make when weighing a complete engineered kit against a typical local-fabricator offer.
- Ask for a full material list, drawing and steel specification before ordering.
- Check whether warranty, product data sheet and lab test certificate are supplied in writing.
- Do not compare a rain-ready NVPH with a basic frame-and-cover quote as if they were identical.
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | 30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | 15-year manufacturing warranty | Rarely a written warranty |
| Engineering | In-house engineering team | No design or load checks |
| Manufacturing | In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | 32-point QA checklist for every part | Visual check at best |
| Lab certificate | Lab test certificate with every dispatch | Not provided |
| Technical sheet | Technical data sheet for every product | Not available |
| Material match | Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | Backed by industry leader Kryzen Biotech | Single-owner workshop |
What arrives in a complete kit, and what can be bought separately
A complete kit is configured for naturally ventilated polyhouses, fan & pad polyhouses, square flat nethouses or curved nethouses. It includes the GI structure, polyfilm, nets and fittings required by the selected design. Individual items can also be bought when a farm needs a replacement cover, net or a specified component rather than a full structure.
For a Pune NVPH, the build can include the 250-micron white diffused polyfilm, selected shade net, side insect net, GI gutter components, roll-up curtains and gear units. For a fan & pad design, the material selection follows the cooling-system design. The useful decision is to specify crop, structure type and site requirement first, then review every line item rather than assume one standard kit fits every farm.
- Naturally ventilated polyhouse material.
- Fan & pad polyhouse material.
- Square nethouse and curved nethouse material.
- Individual polyfilm, nets, GI components and fittings.

Coloured capsicum
NVPHGrow under shade net through April, when highs reach 38°C.

Cucumber (parthenocarpic)
NVPHFast 3–4 month crop; drip irrigation keeps it going in dry spells.

Lettuce and leafy greens
Fan & pad polyhousePads bring April afternoons down to about 30°C, so greens can grow through summer.

Gerbera and rose
NVPHCut flowers with year-round demand from city florists and events.

Vegetable seedlings
Square nethouseRaise nursery seedlings from November to February for the local planting season.
Ordering material and arranging delivery to Pune
Use the kit builder at polyhouseconstructions.com to build the material requirement online. It shows every item, quantity and that week’s rate, so a farmer can review the bill of material before booking. Rates follow weekly GI and plastic rates and are updated every Friday; a 5% bulk discount applies on 10 or more units of an item.
Booking is with 5% advance, with the remaining 95% payable before dispatch. The factory is about 80 km from Pune, and delivery is 1 day after dispatch. For erection, the construction work is carried out by Kryzen Biotech’s construction team through kryzen.com. Pune also has the Polyhouse Constructions Experience Center at Mahalunge; it is not a town sales office.
Before confirming the kit, keep the crop choice, selected structure, desired covered area, site layout and whether installation is required ready for the discussion. This makes it easier to match film, net, ventilation and drainage components to the actual plan.
- Review every item and quantity in the online kit builder.
- Rates are updated each Friday.
- Material delivery to Pune: 1 day after dispatch.
Check subsidy eligibility before work begins
For Pune, the stated MIDH/NHM support is 50% of the cost norm, up to 4,000 m² per beneficiary. The listed non-hilly cost norms are ₹844/m² for tubular NVPH, ₹1,400/m² for fan & pad and ₹710/m² for shade net house. Pune is not under the hilly norms in this guidance.
For commercial projects above 2,500 m², NHB guidelines describe a credit-linked back-ended subsidy of 50% of project cost at admissible norms, capped at ₹56 lakh per project. In-Principle Approval from NHB is needed before starting. Cost norms can change, so confirm the current scheme, application process and admissible design with the Maharashtra state horticulture department before placing the order or beginning construction.
- MIDH/NHM: 50% of cost norm, up to 4,000 m² per beneficiary.
- NHB commercial threshold: above 2,500 m².
- Obtain NHB In-Principle Approval before starting where the NHB route applies.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Which polyhouse is best for a Pune farm?
A naturally ventilated polyhouse is usually the first choice because it keeps June–October rain off the crop and uses roof vents and roll-up curtains for passive airflow. Choose fan & pad if summer cooling for crops such as leafy greens is required; a nethouse is best used mainly from November to February.
How quickly can material be delivered to Pune?
The Degaon, Wai factory is about 80 km from Pune. Delivery takes 1 day after dispatch.
What is included in a Pune polyhouse material kit?
A complete kit includes the GI structure, polyfilm, nets and fittings selected for the design. For an NVPH, this can include 250-micron white diffused polyfilm, shading, side insect net, gutters, curtains and gear units as specified.
Can I see the exact quantity and rate before booking?
Yes. The online kit builder at polyhouseconstructions.com shows every item, quantity and that week’s rate. GI and plastic rates are updated every Friday; booking requires 5% advance and 95% is due before dispatch.
Is subsidy available for a polyhouse in Pune?
MIDH/NHM support is stated as 50% of the cost norm up to 4,000 m² per beneficiary. For NHB commercial projects above 2,500 m², a credit-linked back-ended subsidy may apply, but NHB In-Principle Approval is required before starting and current norms should be confirmed with the state horticulture department.
Polyhouse material near Pune
Supplying a farm outside Pune? These nearby towns, with their own weather, are on the same delivery route.
| Town | From Pune | Hottest month | Rain a year | Suits |
|---|---|---|---|---|
| Polyhouse material in Pimpri-Chinchwad | ~20 km | Apr, 38°C | 1,730 mm | NVPH + fan & pad |
| Polyhouse material in Sasvad | ~40 km | Apr, 38°C | 1,730 mm | NVPH + fan & pad |
| Polyhouse material in Talegaon Dabhade | ~40 km | Apr, 38°C | 1,730 mm | NVPH + fan & pad |
| Polyhouse material in Lonavla | ~70 km | Apr, 35°C | 2,509 mm | NVPH + fan & pad |
| Polyhouse material in Shirur | ~80 km | Apr, 39°C | 811 mm | NVPH + fan & pad |
| Polyhouse material in Wai | ~80 km | Apr, 38°C | 1,910 mm | NVPH + fan & pad |
