How it worksBuy individual items

Equipment · Pune district, Maharashtra

Protected cultivation equipment for Pune farms

By Editorial Team, Kryzen Biotech · Updated 13 November 2026

Pune needs protected-cultivation equipment that can handle two very different periods: dry, high-sun heat in March to May, and a wet, humid monsoon from June to October. Polyhouse Constructions manufactures complete material kits and individual items from its Satara factory; erection is carried out by Kryzen Biotech’s construction team.

Pad cooling
Works: ~30°C inside
Humid months
5
Shading need
High
Delivery
Next day
Exhaust fan wall of a fan and pad polyhouse, equipment we supply to Pune
Exhaust fans pull air through wet cellulose pads on the opposite wall.

Read Pune’s weather before choosing the system

April is the key heat-design month: the average afternoon high is 37.8°C, sunshine reaches 7.1 kWh/m²/day and humidity is 42%. March is also hot and dry at 35.1°C, 39% humidity and 6.6 kWh/m²/day of sun. A white diffused cover, practical side ventilation and shade provision matter during this period rather than treating cooling as an afterthought.

The monsoon changes the requirement. Rain rises to 362 mm in June, peaks at about 515 mm in July and stays at 409 mm in August. Humidity is 80% in June and 89–91% from July to September, while wind reaches 4.9 m/s in July. This makes drainage, film tension, insect-net condition and internal air movement important equipment decisions.

Pune also has cool nights rather than severe cold: January’s average low is 11.8°C and December’s is 12.6°C. The equipment priority is therefore cooling, shading, rain handling and air circulation; no additional night-cold equipment is identified as necessary for this climate.

  • April: 37.8°C average high; 7.1 kWh/m²/day sun.
  • July: 515 mm rain; 89% humidity; 4.9 m/s wind.
  • June–October: humid months, when ventilation and crop hygiene need closer attention.
MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan27.9°C11.8°C54%1 mm51.8
Feb31.4°C14°C45%1 mm5.91.9
Mar35.1°C17.4°C39%5 mm6.62.1
Apr37.8°C20°C42%4 mm7.12.4
May36.2°C21.4°C57%26 mm73.4
Jun29.3°C22°C80%362 mm4.64.2
Jul26.3°C21.5°C89%515 mm3.34.9
Aug25.8°C20.9°C91%409 mm3.44.2
Sep26.5°C20.2°C89%275 mm4.32.5
Oct27.6°C18.2°C80%106 mm51.8
Nov27.1°C15.1°C72%22 mm4.92
Dec26.7°C12.6°C63%4 mm4.71.9
NASA POWER long-term monthly averages for Pune.

Does fan-and-pad cooling make sense here?

Yes, fan-and-pad cooling works in Pune’s hot, relatively dry April conditions. Exhaust fans with cellulose pads can bring an outside temperature of about 38°C down to about 30°C inside. It is a relevant choice where the crop and production plan justify active cooling through the March–May heat, rather than relying only on naturally ventilated side curtains.

Whether it pays for an individual farm cannot be decided from temperature alone. Compare the full equipment requirement, electricity and crop plan against the price season you are targeting. For scale reference, a 52 × 76 m fan-and-pad house is 3,952 m² and lists 12 exhaust fans, 82 cellulose pads and material including GST of ₹32,48,775. That is a sizing example, not a universal equipment list or a farm-specific quotation.

For a naturally ventilated polyhouse (NVPH), side insect net, manual roll-up curtains, polyfilm, gutters and optional air circulation fans form a different package. Square and curved nethouses use shade net and do not use polyfilm, exhaust fans or cellulose pads as standard.

  • Choose fan and pad where April cooling is integral to the crop plan.
  • Choose NVPH where controllable natural ventilation and monsoon-ready drainage are the main requirement.
  • Use air circulation fans as an optional upgrade in NVPH or fan-and-pad houses during humid months.
Fan & pad house, 52 × 76 m
3,952 m²
Exhaust fans
12 nos
Cellulose pads
82 nos
Material incl. GST
₹32,48,775

Cooling and shade equipment with current item rates

The item cards below show the listed rates, with GST additional, for equipment commonly considered for Pune heat. An Exhaust Fan is ₹22,700 per piece + GST. A Cellulose Pad (600X150X1800) is ₹2,616 per piece + GST, and an Aluminium Pad Frame (150 mm) is ₹815 per metre + GST. An Air Circulation Fan is ₹8,999 per piece + GST.

For cover and shade, Polyfilm White Diffused 250 Micron (4.5 m) is ₹254 per metre + GST. White Shade Net 50% is ₹27 per metre + GST, while Aluminium Shade Net (4 m), a reflective option for the strong April sun, is ₹315 per metre + GST. Green Shade Net 50% is ₹27 per metre + GST for nethouse use.

Rates follow weekly GI and plastic rates and are updated every Friday. A farmer can build a complete kit online and see each item, quantity and that week’s rate. A 5% bulk discount applies on 10+ units of an item.

Ventilation, rain control and the small parts that cannot be skipped

In an NVPH, side opening needs components that can be operated and maintained through the rainy season. A Manual Gear Roll Up Curtain Unit is ₹1,050 per piece + GST; Curtain Pipe (27X2.0X6000) is ₹758 per piece + GST; Side Insect Net (5.2 m) is ₹221 per metre + GST; and a Curtain Clamp 0.75 inch is ₹11 per piece + GST. Keep the side net intact: June to October is both humid and wet.

For the July rainfall peak, specify the rain path as part of the material list, not as a later add-on. GI Gutter Sheet is ₹335 per metre + GST, Gutter Funnel is ₹1,350 per piece + GST, and Side Skirting Apron (1.5 m) is ₹64 per metre + GST. Gutters and funnels direct roof runoff, while the skirting apron helps finish the lower side of the house.

The supporting fittings also deserve a counted list: Clamps 60 mm Full are ₹17 per piece + GST, Aluminium Profile is ₹27 per metre + GST, and GI Spring is ₹6 per metre + GST. Every component should match the structure drawing and cover system.

Crop timing should be checked against Pune market seasons

Protected cultivation can help plan crop timing and quality, but it does not guarantee a mandi rate. Use the district price pattern as one input before committing to a system. In Pune district markets, cucumber’s highest month is June at ₹2,402/q, bitter gourd’s is June at ₹3,988/q, and bottle gourd’s is July at ₹2,061/q—months when rain, humidity and airflow management are most demanding.

There are also cooler-season price peaks: green chilli reaches ₹4,903/q in February, cabbage ₹1,433/q and cauliflower ₹1,791/q in November, brinjal ₹3,655/q in November, okra ₹4,371/q in December, and tomato ₹2,354/q in December. These are historical modal-price observations across district markets, not future-price commitments. Relevant outlets listed for the district include Pune (Manjri), Khed (Chakan), Pune (Pimpri), Pune (Moshi), APMC Pune, APMC Khed, Junnar (Narayangaon) and APMC Manchar.

  • Plan April harvests carefully: brinjal’s lowest listed month is April at ₹1,828/q and okra’s is April at ₹2,797/q.
  • March is the lowest listed month for cucumber at ₹1,573/q and tomato at ₹1,123/q.
  • Match crop and sowing decisions to your own selling route and costs, not only to the highest historical month.
CropMarketsAverage modal priceHighest monthLowest month
Cabbage31₹965/qNov (₹1,433)Mar (₹600)
Cucumber31₹1,932/qJun (₹2,402)Mar (₹1,573)
Cauliflower31₹1,326/qNov (₹1,791)Mar (₹915)
Brinjal30₹2,665/qNov (₹3,655)Apr (₹1,828)
Bottle gourd29₹1,782/qJul (₹2,061)Mar (₹1,481)
Okra (bhindi)30₹3,565/qDec (₹4,371)Apr (₹2,797)
Green chilli30₹4,071/qFeb (₹4,903)Sep (₹3,065)
Tomato27₹1,592/qDec (₹2,354)Mar (₹1,123)
Bitter gourd30₹3,175/qJun (₹3,988)Sep (₹2,551)
Coriander (leaves)24₹463/qMay (₹741)Aug (₹179)
Agmarknet daily prices via data.gov.in, last two years, markets in Pune district. ₹ per quintal.

A maintenance calendar aligned to Pune months

Before April, wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust-fan belt and shutter before the 38°C heat period. For naturally ventilated houses, inspect curtain operation and ensure the cover and shade arrangement can be adjusted before March–May.

Before July, clear gutters and funnels, re-seat the side skirting apron and check film tension. This is the practical pre-monsoon check before Pune’s approximately 515 mm July rainfall. Do not wait for a leak or blocked outlet to find a drainage issue.

From June to October, run air circulation fans in the mornings, grease curtain gear units and inspect insect net for tears. In November to February, tighten clamps and bolts, check GI springs in aluminium profiles, and order any replacement film or net before the next working season.

  1. 1

    Before April

    Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 38°C peak.

  2. 2

    Before July

    Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 515 mm.

  3. 3

    June to October

    Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.

  4. 4

    November to February

    Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.

Material quality, tests and written warranty

Polyhouse Constructions uses ISI-marked GI pipes in branded Tata, Jindal and JSW steel. Materials are engineered and manufactured in-house, with a 32-point QA checklist for every part. A lab test certificate is supplied with dispatch, along with a technical data sheet for every product.

The quality checks shown below cover tensile strength of GI pipe steel, salt-spray corrosion resistance and chemical analysis of steel composition. Salt-spray performance is particularly relevant to a location with five humid months from June through October, though it does not remove the need for routine inspection and maintenance.

Warranty is 15 years for the GI structure, 2.5 years for polyfilm and 3 years for shade and insect nets. The polyfilm offered is 250-micron white diffused and UV stabilised.

Tensile test for Pune

Tensile test

Strength of the GI pipe steel, by a third-party lab.

Salt spray test for Pune

Salt spray test

Corrosion resistance; worth it in humid Pune.

Chemical analysis for Pune

Chemical analysis

Spectrometer check of the steel composition.

PartWarranty
GI structure15 years
Polyfilm2.5 years
Shade and insect nets3 years

Ordering kits, construction and replacement spares

Complete material kits are available for NVPH, fan-and-pad polyhouses, square nethouses and curved nethouses. A kit can include GI structure, polyfilm, nets and fittings. Booking is with 5% advance and 95% before dispatch. Material is supplied from the Degaon, Pune–Bangalore Highway factory at Wai, Satara; delivery to Pune is listed as 1 day after dispatch.

Construction is done by Kryzen Biotech’s construction team, rather than by a Pune office. For an existing structure, individual fans, pads, nets, doors, gutters and fittings are also sold separately at the weekly rate for repairs or extensions. This is useful when a torn side insect net, worn GI spring, failed fan or damaged pad needs replacement without buying a full kit.

Ask for a counted material list matched to the selected system. That helps distinguish items standard to the structure from optional upgrades and prevents mixing fan-and-pad items into a nethouse requirement.

Need only a few items?

Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.

Buy individual items →

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

What protected-cultivation equipment is most important for Pune’s April heat?

April averages 37.8°C in the afternoon with 7.1 kWh/m²/day of sun. Exhaust fans and cellulose pads suit fan-and-pad houses; white diffused polyfilm, shade provision and workable side ventilation are important across suitable systems.

Will fan-and-pad cooling work in Pune?

Yes. Pads can bring an outside temperature of about 38°C down to about 30°C inside in Pune conditions. The decision to install it should still be based on the crop plan and full operating requirement, not temperature alone.

What should I prepare before Pune’s July monsoon?

Clear gutters and funnels, check film tension, and re-seat the side skirting apron before July, which averages about 515 mm of rain. During June to October, inspect insect net and keep air movement equipment and curtain gears maintained.

Can I buy only a replacement fan, net or fitting?

Yes. Individual fans, pads, nets and fittings are sold separately at the weekly rate for repairs and extensions. This allows replacement of a specific worn or damaged item without purchasing a complete kit.

What warranty and quality documents come with the material?

The GI structure has a 15-year manufacturing warranty, polyfilm has 2.5 years and shade and insect nets have 3 years. Every dispatch includes a lab test certificate, and every product has a technical data sheet.

Equipment supply near Pune

Nearby towns on the same route, and whether pad cooling works there.

TownFrom PunePad coolingHumid monthsHottest month
Equipment supplier in Pimpri-Chinchwad~20 kmWorks (~30°C)5Apr, 38°C
Equipment supplier in Sasvad~40 kmWorks (~30°C)5Apr, 38°C
Equipment supplier in Talegaon Dabhade~40 kmWorks (~30°C)5Apr, 38°C
Equipment supplier in Lonavla~70 kmWorks (~29°C)5Apr, 35°C
Equipment supplier in Shirur~80 kmWorks (~28°C)3Apr, 39°C
Equipment supplier in Wai~80 kmWorks (~30°C)5Apr, 38°C

All towns: Protected cultivation equipment by town

Sources

  1. Kryzen: Polyhouse construction in Pune
  2. Kryzen: Polyhouse farming in Pune
  3. NASA POWER monthly climate averages for Pune
  4. Agmarknet daily prices (data.gov.in)
Build your kit