How it worksBuy individual items

Subsidy guide · Pune district, Maharashtra

NHB subsidy polyhouse project in Pune

By Editorial Team, Kryzen Biotech · Updated 13 November 2026

For a commercial protected-cultivation project in Pune, NHB is the route to examine when the proposed area is above 2,500 m² and you will take a term loan. Do not start foundations, place material orders or begin erection before NHB In-Principle Approval (IPA); for a smaller eligible project, MIDH/NHM through the Pune district horticulture office may be the more direct route.

NHB route
Projects above 2,500 m²
MIDH / NHM route
Up to 4,000 m² per farmer
Cost norms here
General area
Structure for this climate
NVPH or fan & pad
Subsidy-eligible protected cultivation project like those planned in Pune
Polyhouses, fan and pad houses and nethouses all qualify for 50% assistance at the cost norm.

First decide whether MIDH or NHB fits the project

The scheme choice should follow your proposed area, financing plan and type of applicant—not simply the word “subsidy”. MIDH/NHM is for individual farmers, groups and FPOs, with assistance of 50% of cost up to the applicable cost norm. Its stated area limit is up to 4,000 m² per beneficiary, and the application is made through the Pune district horticulture office.

NHB is intended for commercial projects by farmers, companies, FPOs and entrepreneurs. It applies to projects above 2,500 m², needs a bank term loan, and provides credit-linked, back-ended subsidy of 50% of project cost at admissible norms. The subsidy is credited to the term-loan account after completion and inspection, rather than being cash available to spend before construction.

There can therefore be an area range above 2,500 m² and up to 4,000 m² where the two routes need careful comparison. For NHB, the guidelines state a ceiling of ₹56 lakh per project; current limits, norms and any state top-up should be confirmed with the state horticulture department before you file. The comparison table below is a useful starting point for discussing the route with the district office and bank.

  • Choose MIDH/NHM when the proposal is within the 4,000 m² beneficiary limit and you are applying through the state mission route.
  • Choose NHB for a commercial proposal above 2,500 m² where a bank term loan and a detailed project report are practical.
  • Pune is not under hilly norms; use the applicable general norms, subject to current departmental confirmation.
MIDH / NHM (state mission)NHB commercial project
Who it is forIndividual farmers, groups, FPOsCommercial projects: farmers, companies, FPOs, entrepreneurs
Project sizeUp to 4,000 m² per beneficiaryAbove 2,500 m² (1,000 m² in the North-East)
Assistance50% of cost, up to the cost norm50% of project cost at admissible norms, credit-linked and back-ended
CeilingArea limit per beneficiary₹56 lakh per project in the NHB scheme guidelines; check the current limit
Bank loanNot always neededNeeded: subsidy is credited to the term loan
Apply atthe Pune district horticulture officeNHB online portal (In-Principle Approval) and your bank
From the NHB cost norms and MIDH guidelines. Limits and norms are revised from time to time and states may add their own top-up; confirm current figures with the state horticulture department before you apply.

A structure that can handle Pune’s rain and heat

Pune receives 1,730 mm rain in a year, with the wet period running from June to October. July alone averages 515 mm, and humidity reaches 89% in July and September and 91% in August. A naturally ventilated polyhouse is usually the sensible first structure for a vegetable project: its film roof protects the crop from monsoon rain, while roof vents and roll-up curtains provide air movement without depending on powered cooling.

April is the hottest month, with an average afternoon high of 37.8°C and the strongest sunshine at 7.1 kWh/m²/day. If the crop plan includes crops that need more temperature control, a fan-and-pad polyhouse is also a good fit. In April, pad cooling can bring a 38°C afternoon to about 30°C inside. This is relevant for leafy greens and other crops where heat management is central to quality.

A square or curved nethouse is better treated as seasonal in Pune. November to February is the stated nethouse season, when rainfall is low. It does not offer the rain exclusion of a polyhouse during the June–October period. Match the design to the crop calendar, not merely the lower initial structure category.

  • Naturally ventilated polyhouse: usual first choice for rain protection and vegetable production.
  • Fan and pad polyhouse: consider where April heat control is necessary and operating power is planned.
  • Nethouse: more suitable for the November–February window or shade-oriented use than monsoon production.

What a one-acre NHB example looks like

A worked example helps separate the approved cost norm from the supplier’s material price. For a 3,952 m² area—about one acre—the example uses a fan-and-pad polyhouse. The structure norm is ₹1,400 per m², giving an eligible structure cost of ₹55,32,800. High-value vegetable planting material is shown at ₹140 per m², or ₹5,53,280.

Together, the eligible project cost in this illustration is ₹60,86,080. At 50% of the norm, the maximum illustrated subsidy is ₹30,43,040 (₹30.43 lakh). The example lists our material price that week, including GST, as ₹32,48,775 or ₹822/m²; it is ex-factory and excludes freight and erection. It is not the sanctioned project cost or a promise of subsidy.

Use the table below only as a planning worksheet. Sanction depends on the approved project, current norms and inspection. Build the DPR around your actual area, structure, crop and loan requirement, then seek the bank and departmental view before committing money.

  • Area in the example: 3,952 m².
  • Structure selected: fan and pad polyhouse.
  • Maximum illustrated subsidy: ₹30,43,040 at 50% of the norm.
ItemAmount
StructureFan and pad polyhouse
Area3,952 m² (about one acre)
Structure cost norm₹1,400 per m²
Eligible structure cost₹55,32,800
Planting material norm (high-value vegetables)₹140 per m² → ₹5,53,280
Eligible project cost₹60,86,080
Maximum subsidy at 50% of the norm₹30,43,040 (₹30.43 lakh)
Our material price this week (incl. GST)₹32,48,775 (₹822/m²)
Indicative only: the sanctioned amount depends on the approved project, current norms and inspection. Material price is ours, ex-factory, without freight or erection.

Crop and planting-material planning for Pune markets

For an NHB project report, planting material should be budgeted using the eligible category relevant to the crop. The NHB planting-material norm shown for high-value vegetables is ₹140 per m². This group suits Pune well and includes coloured capsicum, parthenocarpic cucumber, lettuce and leafy greens. Gerbera and rose are also listed as suitable flower choices, while orchid and anthurium are marked less suited.

The crop decision should include a selling plan, not only a protected-cultivation plan. Pune district markets include Pune (Manjri), Khed (Chakan), Pune (Pimpri), Pune (Moshi), Pune (Khadiki), APMC Pune, Junnar (Narayangaon) and APMC Manchar. In the recorded district data, cucumber’s highest month is June at ₹2,402/q, bitter gourd’s is June at ₹3,988/q, and green chilli’s is February at ₹4,903/q.

Other useful seasonal references are tomato, highest in December at ₹2,354/q; bhindi, highest in December at ₹4,371/q; and brinjal, highest in November at ₹3,655/q. These are historic market observations, not assured farm-gate prices. Plan planting and harvest windows after considering crop duration, protected growing conditions, grading and the market you can actually serve.

  • High-value vegetables: ₹140 per m² planting-material norm in the table.
  • Cucumber: highest recorded month June; lowest month March.
  • Green chilli: highest recorded month February; lowest month September.
  • Tomato and bhindi: highest recorded month December.
Crop groupNHB normSuits Pune?
High-value vegetables₹140 per m²Yes: Coloured capsicum, Cucumber (parthenocarpic), Lettuce and leafy greens
Orchid and anthurium₹700 per m²Less suited
Carnation and gerbera₹610 per m²Yes: Gerbera and rose
Rose and lilium₹426 per m²Yes: Gerbera and rose

Start the application at the right place, before work

For MIDH/NHM, approach the Pune district horticulture office with the proposed area, land papers, crop plan and supplier specification. Ask the office to confirm the current process, applicable norm and inspection requirements before construction. A project within the MIDH area limit should not be assumed to be automatically approved merely because it is physically complete.

For NHB, apply through the NHB online portal for In-Principle Approval and work with your bank for term-loan sanction. IPA is required before work starts. The DPR should set out the structure cost, crop plan, planting material, operating assumptions and cash flow in a form the bank can evaluate. Since the benefit is credit-linked and back-ended, arrange the project finance rather than treating subsidy as upfront construction funding.

After approval and loan sanction, construct according to the approved design and retain records. The project is jointly inspected after completion; the NHB subsidy is then released to the bank loan account. Under MIDH, release is to the beneficiary as per the state process.

  • MIDH/NHM: Pune district horticulture office.
  • NHB: online IPA application plus bank term loan.
  • Both routes: obtain approval first, then build to the approved specification.
  1. 1

    Pick the structure and size

    Match it to Pune's climate (see above) and your market. Keep under 4,000 m² for MIDH, or above 2,500 m² for an NHB project.

  2. 2

    Get a quotation and project report

    An itemised supplier quotation with HSN codes, and for NHB a detailed project report (DPR) with costs, crop plan and cash flow.

  3. 3

    Apply before you build

    MIDH: apply at the Pune district horticulture office. NHB: file for In-Principle Approval on the NHB portal; NHB has required IPA before work starts since 2017.

  4. 4

    Bank loan (NHB)

    Get the term loan sanctioned. The subsidy is back-ended: it is paid into the loan account after the project is complete.

  5. 5

    Build to standard

    Build with BIS-standard material and keep every test certificate and invoice: inspectors check the structure against the approved design.

  6. 6

    Inspection and release

    After a joint inspection, the subsidy is released to your bank (NHB) or to you (MIDH, as per the state process).

Subsidy application steps for a polyhouse project in Pune

Documents to gather before the bank or office asks

Prepare the file before seeking quotations or loan appraisal. Land records should be in your name—typically the Maharashtra 7/12 extract (Satbara) and 8A—or you should have a registered lease, along with a site map. Keep Aadhaar, PAN and bank details ready; companies and FPOs also need their registration papers.

A soil and water test report is important for a crop decision and loan appraisal. The supplier quotation should be itemised, showing specifications, quantities, HSN codes and GST. For NHB, add the DPR and bank sanction letter. Once purchasing starts after approval, preserve all invoices and material test certificates for inspection.

Polyhouse Constructions is a manufacturer supplying complete material kits from its Degaon, Satara factory, not a Pune town office. The kits can include GI structure, polyfilm, nets and fittings. Construction or erection is carried out by Kryzen Biotech’s construction team. We can provide an itemised quotation, lab test certificates and technical data sheets; do not substitute these documents for the approvals required from NHB, the bank or the department.

  • Land record or registered lease and site map.
  • Aadhaar, PAN, bank details and entity registration papers where relevant.
  • Soil and water report, itemised quotation, DPR and NHB bank sanction.
  • Invoices and material certificates retained after purchase.
  • Land records in your name (in Maharashtra: 7/12 extract (Satbara) and 8A), or a registered lease, with a site map
  • Aadhaar, PAN and bank details; for companies and FPOs, registration papers
  • Soil and water test report
  • Supplier quotation with HSN codes and specifications
  • Detailed project report and bank sanction letter (NHB)
  • Test certificates and invoices for the material, after purchase
Itemised quotation for Pune

Itemised quotation

Every item with size, quantity, HSN code and GST, ready to attach to the application.

Lab test certificates for Pune

Lab test certificates

Tensile, chemical, salt spray and other tests on the steel, by third-party labs.

ISI-marked GI for Pune

ISI-marked GI

GI pipes from Tata, Jindal or JSW steel, with a 15-year warranty.

Mistakes that can put subsidy eligibility at risk

The biggest avoidable error is beginning work before NHB IPA. Excavation, foundations, ordering material or erection before the required approval can create a serious eligibility problem. A second error is treating the subsidy figure as the amount payable at the start; under NHB it is back-ended against the term loan after completion and inspection.

Do not submit a generic quotation that does not match the proposed drawing, size and structure category. Inspectors check the project against the approved design, so a later change from naturally ventilated to fan-and-pad, or a different area, should be addressed through the proper approval process rather than assumed acceptable.

Finally, do not select a nethouse for a monsoon crop merely because it appears economical. Pune’s June–October humidity and rainfall make rain exclusion and ventilation central design questions. Keep bills, certificates and specifications together from the first approved purchase onward.

  • No NHB work before IPA.
  • Do not rely on subsidy as upfront cash.
  • Keep the final structure, area and documents aligned with the approved project.
  • Select protection based on June–October rain as well as April heat.

Material and construction support for the approved design

Once the scheme route and approved drawing are clear, order material that matches them item by item. Polyhouse Constructions supplies naturally ventilated polyhouse, fan-and-pad polyhouse, square nethouse and curved nethouse kits, as well as individual items. GI pipes are ISI-marked branded steel from Tata, Jindal and JSW; the GI structure carries a 15-year warranty, polyfilm 2.5 years and nets 3 years.

Our in-house engineering and manufacturing process includes a 32-point QA check, lab test certificates with dispatch and a technical data sheet for every product. Prices follow weekly GI and plastic rates updated every Friday. Booking is with 5% advance and 95% before dispatch. For a Pune project, material is supplied from the Satara factory, while Kryzen Biotech’s team undertakes construction.

  • Confirm the approved bill of quantities before booking.
  • Use the quotation, invoices, certificates and data sheets in the inspection file.
  • Keep material supply and construction scheduling aligned with the bank and approval timeline.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Can I use NHB for a 3,000 m² polyhouse project in Pune?

NHB commercial projects are stated as above 2,500 m² and require a term loan, so a 3,000 m² proposal can fall within its stated size condition. MIDH/NHM also has an area limit up to 4,000 m² per beneficiary, so confirm the appropriate route and current norms with the Pune district horticulture office before applying.

Is NHB subsidy paid before I build the polyhouse?

No. NHB assistance is credit-linked and back-ended, meaning it is credited to the term-loan account after the project is completed and inspected. You need bank finance and must obtain NHB In-Principle Approval before work starts.

Which polyhouse is most practical for Pune weather?

A naturally ventilated polyhouse is usually the first choice because it keeps June–October rain off the crop and provides ventilation through roof vents and curtains. A fan-and-pad polyhouse is worth considering for crops needing more cooling during April, when Pune averages 37.8°C afternoons.

What is the subsidy in the one-acre fan-and-pad example?

For 3,952 m², the illustrated eligible project cost is ₹60,86,080, including structure and high-value vegetable planting-material norms. At 50%, the maximum illustrated subsidy is ₹30,43,040, subject to approved project details, current norms and inspection.

Which papers should I take for an NHB loan and IPA application?

Keep land records or a registered lease with site map, Aadhaar, PAN, bank details, soil and water test report, and an itemised supplier quotation. For NHB, the DPR and bank sanction letter are also required; retain invoices and material test certificates after purchase.

Subsidy projects near Pune

The same guide for nearby towns, with the structure that suits each.

TownFrom PuneDistrictCost normsSuits
Subsidy project in Pimpri-Chinchwad~20 kmPuneGeneralNVPH or fan & pad
Subsidy project in Sasvad~40 kmPuneGeneralNVPH or fan & pad
Subsidy project in Talegaon Dabhade~40 kmPuneGeneralNVPH or fan & pad
Subsidy project in Lonavla~70 kmPuneGeneralNVPH or fan & pad
Subsidy project in Shirur~80 kmPuneGeneralNVPH or fan & pad
Subsidy project in Wai~80 kmSataraGeneralNVPH or fan & pad

All towns: Subsidy projects by town

Sources

  1. NHB cost norms for protected cultivation
  2. NHB scheme guidelines (commercial horticulture)
  3. Mission for Integrated Development of Horticulture
  4. Kryzen: Polyhouse construction in Pune
  5. Kryzen: Polyhouse farming in Pune
  6. NASA POWER monthly climate averages for Pune
  7. Agmarknet daily prices (data.gov.in)
Build your kit