Polyhouse material · Satara district, Maharashtra
Polyhouse Material Supplier in Wai
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
Growers and contractors in Wai and across Satara district can buy every part of a polyhouse from one supplier: the GI frame, covering film, nets, gutters and fittings, counted for the exact size you build. We dispatch from our Degaon factory near Satara, roughly 10 km from Wai, and the truck usually arrives the next day.
- Distance from factory
- ~10 km by road
- Delivery after dispatch
- Next day
- Hottest month
- April, ~38°C
- Climate pick
- NVPH + fan & pad
Four structures, one supplier for Wai
Each kit comes with the full GI structure, covering and fittings. Here is how each one suits Wai's climate.

Naturally ventilated polyhouse
Best fitFilm roof keeps June–October rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Wai.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In April that can take a 38°C afternoon down to about 30°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from November to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in April.
Plants you can grow in Wai
Crops that suit protected cultivation in Wai, with the structure we would grow each one in.

Coloured capsicum
NVPH
Grow under shade net through April, when highs reach 38°C.

Cucumber (parthenocarpic)
NVPH
Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Lettuce and leafy greens
Fan & pad polyhouse
Pads bring April afternoons down to about 30°C, so greens can grow through summer.

Gerbera and rose
NVPH
Cut flowers with year-round demand from city florists and events.
🌱 Vegetable seedlings
Square nethouse
Raise nursery seedlings from November to February for the local planting season.
Why choose Polyhouse Construction over a local fabricator in Wai
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | ✓30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | ✓Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | ✓15-year manufacturing warranty | Rarely a written warranty |
| Engineering | ✓In-house engineering team | No design or load checks |
| Manufacturing | ✓In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | ✓32-point QA checklist for every part | Visual check at best |
| Lab certificate | ✓Lab test certificate with every dispatch | Not provided |
| Technical sheet | ✓Technical data sheet for every product | Not available |
| Material match | ✓Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | ✓Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | ✓Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | ✓Backed by industry leader Kryzen Biotech | Single-owner workshop |
A year of weather in Wai, month by month
Plan film, shading and planting around these months. Open-mesh nethouses work best from November to February; keep curtains and vents ready for the humid stretch from June to October.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~38°C highs | ||||||||||||
| Strongest sun | 7 kWh/m²/day | ||||||||||||
| Wettest month | ~573 mm | ||||||||||||
| Humid (75%+) | June–October | ||||||||||||
| Nethouse season | November–February |
From NASA POWER monthly averages for Wai.
Which materials suit Wai's climate
Summer peaks in April, when Wai averages about 38°C in the afternoon at 43% humidity. Yearly rainfall is around 1,910 mm and the town sits about 718 m above sea level. This is how we match the material list to that weather.
| Part | What we supply | Why in Wai |
|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Sunlight peaks in April at about 7 kWh per m² a day; diffused film spreads it and cuts leaf scorch. |
| Shading | Aluminium (reflective) shade net | 38°C highs and strong sun: a reflective net sends heat back out instead of holding it inside. |
| Gutters | GI gutter sheet, a funnel at each gutter end, side skirting apron | July alone brings about 573 mm of rain; size the drains for that month. |
| Ventilation | Roll-up side curtains with gear unit, side insect net, entry cabin | Humidity stays at 75% or more from June to October; open sides and a double-door cabin keep air moving and pests out. |
Mandi price seasons around Wai
Across 12 mandis in Satara district, 8 polyhouse and nethouse crops trade regularly. Green chilli has the most arrivals; Cabbage has the widest price swing (128%), peaking in November.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Green chilli | 18 | ₹3,883/q | Mar · ₹4,901 | Dec · ₹2,923 | 68% |
| Brinjal | 18 | ₹2,574/q | Nov · ₹3,182 | Jan · ₹2,014 | 58% |
| Tomato | 17 | ₹1,520/q | Dec · ₹2,048 | Apr · ₹1,167 | 75% |
| Okra (bhindi) | 13 | ₹3,494/q | Dec · ₹4,271 | Apr · ₹2,750 | 55% |
| Cabbage | 13 | ₹1,154/q | Nov · ₹1,558 | Apr · ₹682 | 128% |
| Cauliflower | 10 | ₹2,159/q | Jun · ₹3,182 | Mar · ₹1,423 | 124% |
| Cucumber | 11 | ₹1,868/q | Jun · ₹2,276 | Mar · ₹1,496 | 52% |
| Bottle gourd | 9 | ₹1,585/q | Jul · ₹1,867 | Mar · ₹1,331 | 40% |
Timing your crop for the Wai market
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, green chilli peaks in March; at about 75 days to first harvest, transplant in December.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Green chilli | Feb, Mar | ~75 | December | Dec |
| Brinjal | Jun, Jul, Aug, Oct, Nov | ~60 | September | Jan |
| Tomato | Dec | ~75 | September | Apr |
| Okra (bhindi) | Jan, Feb, Dec | ~45 | October | Apr |
| Cabbage | Jun, Jul, Nov, Dec | ~75 | August | Apr |
| Cauliflower | Jun, Jul | ~75 | March | Mar |
| Cucumber | Jan, May, Jun | ~40 | April | Mar |
| Bottle gourd | Jun, Jul, Aug, Nov | ~55 | May | Mar |
Wai month by month
April is the hottest month, with afternoons around 38.2°C; January nights drop to about 12.4°C. July is the wettest (573 mm of 1,910 mm a year), and humidity stays at 75% or more for 5 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 28.9°C | 12.4°C | 53% | 1 mm | 5.1 | 1.8 |
| Feb | 32.4°C | 14.6°C | 44% | 1 mm | 5.9 | 1.9 |
| Mar | 35.9°C | 17.8°C | 39% | 4 mm | 6.6 | 2.1 |
| Apr | 38.2°C | 20.3°C | 43% | 5 mm | 7 | 2.3 |
| May | 36.2°C | 21.6°C | 58% | 37 mm | 6.8 | 3.3 |
| Jun | 28.9°C | 22.1°C | 82% | 410 mm | 4.3 | 4.1 |
| Jul | 26.1°C | 21.7°C | 90% | 573 mm | 3.3 | 4.7 |
| Aug | 25.6°C | 21°C | 92% | 457 mm | 3.6 | 4.1 |
| Sep | 26.5°C | 20.4°C | 90% | 286 mm | 4.3 | 2.5 |
| Oct | 27.8°C | 18.5°C | 81% | 112 mm | 5 | 1.8 |
| Nov | 27.4°C | 15.4°C | 72% | 21 mm | 4.9 | 1.9 |
| Dec | 27.3°C | 13°C | 62% | 3 mm | 4.8 | 1.9 |
Getting the material to Wai
Wai is about 10 km by road from our factory at Degaon, Satara, on the Pune–Bangalore highway. Once your order is packed, the truck usually reaches Wai the next day, with the invoice and test reports.
Each vehicle is insured for the full invoice value. Share the farm PIN code and access road details so we send a truck that can reach the site.
Subsidy on polyhouse material in Maharashtra
Under the Mission for Integrated Development of Horticulture (MIDH), farmers in Maharashtra can get 50% of the government cost norm for naturally ventilated polyhouses (₹1,000–1,200 per m²), fan and pad polyhouses (₹1,500–1,800 per m²) and nethouses (₹710 per m²), on up to 2,500 m² per farmer. The subsidy is worked out on the government cost norm for your structure and size, not on your bill.
Commercial projects above 2,500 m² can apply to the National Horticulture Board for a credit-linked subsidy of 50% of the eligible project cost, up to ₹100 lakh per project. Both schemes want materials that meet BIS standards: our GI pipes carry the ISI mark and test reports ship with every order. Apply through the Maharashtra horticulture department or your district horticulture officer before you buy.
Get polyhouse material from India's biggest CEA manufacturing company
Choose your structure and size, and get the complete material list in a minute.
FAQs
Do you deliver polyhouse material to Wai?
Yes. We dispatch from our factory at Degaon, Satara, about 10 km from Wai by road, and the truck usually arrives the next day. Every load is insured for the invoice value.
Which polyhouse suits Wai?
A naturally ventilated polyhouse for vine crops, and fan and pad cooling if you grow greens through April: the air is dry enough for pads to bring 38°C down to about 30°C.
Is there a subsidy for polyhouse material in Maharashtra?
Yes. NHM / MIDH pays 50% of the cost norm on up to 2,500 m² per farmer, and NHB gives a 50% credit-linked subsidy for projects above 2,500 m². Apply before buying; we provide the quotation, ISI-marked material and test reports the claim needs.
What warranty do the materials carry?
GI pipes carry a 15-year warranty, polyfilm 2.5 years and nets 3 years.
Can I buy only a few items, like film or nets?
Yes. Use Buy individual items to order film, nets, fittings or pipes on their own, for repairs or an extension.
Can you also build the polyhouse in Wai?
Yes. Kryzen Biotech's construction team builds polyhouses and nethouses across India, including Maharashtra. See the link to polyhouse construction in Wai below.
Polyhouse material near Wai
Neighbouring towns we deliver to from the same route, and how their climate compares with Wai.
| Town | From Wai | Hottest month | Rain a year | Suits |
|---|---|---|---|---|
| Polyhouse material in Satara | ~40 km | Apr, 37°C | 2,045 mm | NVPH + fan & pad |
| Polyhouse material in Sasvad | ~60 km | Apr, 38°C | 1,730 mm | NVPH + fan & pad |
| Polyhouse material in Mahad | ~70 km | Apr, 36°C | 2,328 mm | NVPH |
| Polyhouse material in Phaltan | ~70 km | Apr, 39°C | 871 mm | NVPH + fan & pad |
| Polyhouse material in Pune | ~80 km | Apr, 38°C | 1,730 mm | NVPH + fan & pad |
| Polyhouse material in Pimpri-Chinchwad | ~100 km | Apr, 38°C | 1,730 mm | NVPH + fan & pad |
Want it built as well? Read about polyhouse construction in Wai on the Kryzen blog.
