Subsidy guide · Madhya Pradesh
NHB Subsidy Eligible Protected Cultivation Project in Dewas
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
Polyhouses and nethouses in Dewas can get 50% government assistance, but which scheme applies depends on the size of your project, and the amount depends on the government cost norm, not your bill. This page walks through both routes for a project in Dewas, with a worked example for the structure that suits Dewas's climate.
- NHB route
- Projects above 2,500 m²
- MIDH / NHM route
- Up to 4,000 m² per farmer
- Cost norms here
- General area
- Structure for this climate
- NVPH or fan & pad

NHB or MIDH: which scheme fits a project in Dewas
For a project in Dewas the first question is size. Up to 4,000 m², the MIDH route through the Madhya Pradesh horticulture department is usually simpler. Above 2,500 m², an NHB project with a bank loan becomes possible.
| MIDH / NHM (state mission) | NHB commercial project | |
|---|---|---|
| Who it is for | Individual farmers, groups, FPOs | Commercial projects: farmers, companies, FPOs, entrepreneurs |
| Project size | Up to 4,000 m² per beneficiary | Above 2,500 m² (1,000 m² in the North-East) |
| Assistance | 50% of cost, up to the cost norm | 50% of project cost at admissible norms, credit-linked and back-ended |
| Ceiling | Area limit per beneficiary | ₹56 lakh per project in the NHB scheme guidelines; check the current limit |
| Bank loan | Not always needed | Needed: subsidy is credited to the term loan |
| Apply at | the district horticulture office | NHB online portal (In-Principle Approval) and your bank |
Worked example: a 3,952 m² project in Dewas
Take a fan and pad polyhouse of 3,952 m² in Dewas, growing high-value vegetables. At that size it can go to NHB as a commercial project, or to MIDH since it is under 4,000 m². The most it can receive at NHB's general norms:
| Item | Amount |
|---|---|
| Structure | Fan and pad polyhouse |
| Area | 3,952 m² (about one acre) |
| Structure cost norm | ₹1,400 per m² |
| Eligible structure cost | ₹55,32,800 |
| Planting material norm (high-value vegetables) | ₹140 per m² → ₹5,53,280 |
| Eligible project cost | ₹60,86,080 |
| Maximum subsidy at 50% of the norm | ₹30,43,040 (₹30.43 lakh) |
| Our material price this week (incl. GST) | ₹32,48,775 (₹822/m²) |
Assistance is usually 50% of your actual eligible cost or of the cost norm, whichever is lower, so put every eligible cost in the project report: material, freight, erection, drip and planting material. Our material alone comes to ₹822 per m² this week against a structure norm of ₹1,400; freight and erection come on top.
Mandi price seasons around Dewas
Across 8 mandis in Dewas district, 8 polyhouse and nethouse crops trade regularly. Cauliflower has the most arrivals; Green chilli has the widest price swing (170%), peaking in February.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Cauliflower | 4 | ₹1,239/q | Aug · ₹1,506 | Jun · ₹835 | 80% |
| Tomato | 4 | ₹1,301/q | Aug · ₹2,114 | Mar · ₹926 | 128% |
| Cabbage | 4 | ₹909/q | Oct · ₹1,225 | Jun · ₹591 | 107% |
| Okra (bhindi) | 4 | ₹1,491/q | Mar · ₹2,638 | Sep · ₹1,021 | 158% |
| Brinjal | 4 | ₹811/q | Feb · ₹930 | Jun · ₹634 | 47% |
| Green chilli | 4 | ₹2,458/q | Feb · ₹4,239 | Jun · ₹1,568 | 170% |
| Green peas | 6 | ₹3,226/q | Dec · ₹3,944 | Feb · ₹2,355 | 67% |
| Coriander (leaves) | 2 | ₹7,735/q | Jul · ₹10,912 | Nov · ₹5,997 | 82% |
When to plant in Dewas for the best prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, cauliflower peaks in August; at about 75 days to first harvest, transplant in May.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Cauliflower | Mar, Aug, Sep, Oct | ~75 | May | Jun |
| Tomato | Aug | ~75 | May | Mar |
| Cabbage | Aug, Sep, Oct | ~75 | July | Jun |
| Okra (bhindi) | Feb, Mar | ~45 | January | Sep |
| Brinjal | Feb, Mar, Aug, Sep, Oct | ~60 | December | Jun |
| Green chilli | Feb | ~75 | November | Jun |
| Green peas | Oct, Dec | ~60 | October | Feb |
| Coriander (leaves) | Jul | ~35 | May | Nov |
Dewas month by month
May is the hottest month, with afternoons around 42.1°C; January nights drop to about 9.4°C. July is the wettest (333 mm of 1,014 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 26.5°C | 9.4°C | 39% | 7 mm | 4.5 | 1.9 |
| Feb | 30.5°C | 12.5°C | 31% | 5 mm | 5.4 | 2 |
| Mar | 35.3°C | 17.4°C | 24% | 8 mm | 6.4 | 2.2 |
| Apr | 40.1°C | 22.8°C | 20% | 4 mm | 7.1 | 2.8 |
| May | 42.1°C | 26.5°C | 26% | 12 mm | 7.2 | 4 |
| Jun | 36.8°C | 25.5°C | 55% | 136 mm | 5.6 | 3.9 |
| Jul | 30.6°C | 23.1°C | 80% | 333 mm | 4 | 3.6 |
| Aug | 28.7°C | 22.3°C | 87% | 309 mm | 3.8 | 3 |
| Sep | 29.3°C | 21.2°C | 83% | 158 mm | 4.8 | 2 |
| Oct | 30°C | 17.8°C | 67% | 26 mm | 5.3 | 1.4 |
| Nov | 28.7°C | 13.9°C | 55% | 12 mm | 4.6 | 1.4 |
| Dec | 27°C | 10.5°C | 45% | 4 mm | 4.3 | 1.6 |
Steps to apply
- 1
Pick the structure and size
Match it to Dewas's climate (see above) and your market. Keep under 4,000 m² for MIDH, or above 2,500 m² for an NHB project.
- 2
Get a quotation and project report
An itemised supplier quotation with HSN codes, and for NHB a detailed project report (DPR) with costs, crop plan and cash flow.
- 3
Apply before you build
MIDH: apply at the district horticulture office. NHB: file for In-Principle Approval on the NHB portal; NHB has required IPA before work starts since 2017.
- 4
Bank loan (NHB)
Get the term loan sanctioned. The subsidy is back-ended: it is paid into the loan account after the project is complete.
- 5
Build to standard
Build with BIS-standard material and keep every test certificate and invoice: inspectors check the structure against the approved design.
- 6
Inspection and release
After a joint inspection, the subsidy is released to your bank (NHB) or to you (MIDH, as per the state process).

Eligible structures and how they suit Dewas
All four structures we supply are covered by the schemes. What matters for the project's success is the fit with Dewas's weather.

Naturally ventilated polyhouse
Best fitFilm roof keeps monsoon rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Dewas.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 42°C afternoon down to about 30°C inside, cool enough for leafy greens.

Square nethouse
Good fitFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Low rain here keeps it useful most of the year.

Curved nethouse
Good fitArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
Planting material norms and crops that suit
NHB also counts planting material and cultivation in the project cost, at these norms. The right column shows which groups suit this climate.
| Crop group | NHB norm | Suits Dewas? |
|---|---|---|
| High-value vegetables | ₹140 per m² | Yes: Coloured capsicum, Cucumber (parthenocarpic), Lettuce and leafy greens |
| Orchid and anthurium | ₹700 per m² | Less suited |
| Carnation and gerbera | ₹610 per m² | Yes: Gerbera and rose |
| Rose and lilium | ₹426 per m² | Yes: Gerbera and rose |
Documents you will usually need
- Land records in your name (in Madhya Pradesh: Khasra and B-1), or a registered lease, with a site map
- Aadhaar, PAN and bank details; for companies and FPOs, registration papers
- Soil and water test report
- Supplier quotation with HSN codes and specifications
- Detailed project report and bank sanction letter (NHB)
- Test certificates and invoices for the material, after purchase
What we provide for your file:

Itemised quotation
Every item with size, quantity, HSN code and GST, ready to attach to the application.

Lab test certificates
Tensile, chemical, salt spray and other tests on the steel, by third-party labs.

ISI-marked GI
GI pipes from Tata, Jindal or JSW steel, with a 15-year warranty.
Material for your Dewas project
We supply the complete material for subsidy projects in Madhya Pradesh from our Satara factory, about 780 km from Dewas. See the kit and live price for your structure:
Dewas within Madhya Pradesh
Among the 84 towns we supply in Madhya Pradesh, Dewas ranks 56th for summer heat and 44th for yearly rain. Other Madhya Pradesh towns on our list:
- Subsidy project in Indore
- Subsidy project in Bhopal
- Subsidy project in Jabalpur
- Subsidy project in Gwalior
- Subsidy project in Ujjain
- Subsidy project in Satna
- Subsidy project in Sagar
- Subsidy project in Ratlam
- Subsidy project in Rewa
- Subsidy project in Katni
- Subsidy project in Singrauli
- Subsidy project in Burhanpur
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Is a polyhouse in Dewas eligible for NHB subsidy?
Yes, if the project is above 2,500 m² and set up as a commercial project with a bank loan. NHB gives a credit-linked, back-ended subsidy of 50% of project cost at its norms. Smaller projects can apply under MIDH through the district horticulture office.
How much subsidy can I get on 1 acre in Dewas?
For a 3,952 m² fan and pad polyhouse with high-value vegetables, up to about ₹30.43 lakh at NHB's general norms (50% of ₹60,86,080). The sanctioned figure depends on the approved project.
Is the subsidy paid on my bill or on the cost norm?
Usually on whichever is lower: your actual eligible cost or the admissible cost norm. Include every eligible cost (material, freight, erection, irrigation, planting material) in the project report.
Can I build first and apply later?
No. NHB requires In-Principle Approval before work starts, and MIDH applications are approved before the structure is built. Apply first.
Are hilly-area norms used in Madhya Pradesh?
Not generally; Madhya Pradesh uses general-area norms.
Does the material need to be ISI-marked?
The schemes expect structures that conform to technical standards. Our GI pipes carry the ISI mark and every order ships with lab test certificates.
Subsidy projects near Dewas
The same guide for nearby towns, with the structure that suits each.
| Town | From Dewas | District | Cost norms | Suits |
|---|---|---|---|---|
| Subsidy project in Indore | ~50 km | Indore | General | NVPH or fan & pad |
| Subsidy project in Tarana | ~50 km | — | General | NVPH or fan & pad |
| Subsidy project in Ujjain | ~50 km | Ujjain | General | NVPH or fan & pad |
| Subsidy project in Rau | ~60 km | Indore | General | NVPH or fan & pad |
| Subsidy project in Mhow Cantonment | ~70 km | Indore | General | NVPH or fan & pad |
| Subsidy project in Mhowgaon | ~70 km | Indore | General | NVPH or fan & pad |
