How it worksBuy individual items

NVPH materials · Madhya Pradesh

Naturally Ventilated Polyhouse Materials Seller in Dewas

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

A naturally ventilated polyhouse (NVPH) needs no fans or pads: warm air leaves through the roof vent and fresh air comes in through roll-up side curtains. Whether that is enough depends on the weather, so this page works through Dewas's numbers — May afternoons of about 42°C, 1,014 mm of rain a year and humid air from July to September — and the NVPH material we would send for them.

Hottest month
May, ~42°C
Humid (75%+)
3 months
NVPH material, 1 acre
₹734/m²
Delivery
~3 days
Naturally ventilated polyhouse built with our material, like those we supply to Dewas
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Dewas?

In May the air is dry enough (26% humidity) for an NVPH to vent well, but afternoons of 42°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureDewasMadhya Pradesh average (84 towns)What it means for the NVPH
Hottest-month high42°C (May)42.7°Cclose to the state average
Humidity in that month26%25%Dry air vents easily
Rain a year1,014 mm1,036 mmclose to the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Dewas
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Dewas

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Dewas; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor DewasWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 7.2 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 42°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepJuly brings ~333 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Mandi price seasons around Dewas

Prices at the mandis in Dewas district follow a clear yearly pattern. Green chilli is the extreme case, from ₹1,568 per quintal in June up to ₹4,239 in February (170% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.

CropMarketsAverageHighest monthLowest monthSwing
Cauliflower4₹1,239/qAug · ₹1,506Jun · ₹83580%
Tomato4₹1,301/qAug · ₹2,114Mar · ₹926128%
Cabbage4₹909/qOct · ₹1,225Jun · ₹591107%
Okra (bhindi)4₹1,491/qMar · ₹2,638Sep · ₹1,021158%
Brinjal4₹811/qFeb · ₹930Jun · ₹63447%
Green chilli4₹2,458/qFeb · ₹4,239Jun · ₹1,568170%
Green peas6₹3,226/qDec · ₹3,944Feb · ₹2,35567%
Coriander (leaves)2₹7,735/qJul · ₹10,912Nov · ₹5,99782%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Dewas district. ₹ per quintal (100 kg).

When to plant in Dewas for the best prices

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, cauliflower peaks in August; at about 75 days to first harvest, transplant in May.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
CauliflowerMar, Aug, Sep, Oct~75MayJun
TomatoAug~75MayMar
CabbageAug, Sep, Oct~75JulyJun
Okra (bhindi)Feb, Mar~45JanuarySep
BrinjalFeb, Mar, Aug, Sep, Oct~60DecemberJun
Green chilliFeb~75NovemberJun
Green peasOct, Dec~60OctoberFeb
Coriander (leaves)Jul~35MayNov
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Dewas's weather, month by month

May is the hottest month, with afternoons around 42.1°C; January nights drop to about 9.4°C. July is the wettest (333 mm of 1,014 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan26.5°C9.4°C39%7 mm4.51.9
Feb30.5°C12.5°C31%5 mm5.42
Mar35.3°C17.4°C24%8 mm6.42.2
Apr40.1°C22.8°C20%4 mm7.12.8
May42.1°C26.5°C26%12 mm7.24
Jun36.8°C25.5°C55%136 mm5.63.9
Jul30.6°C23.1°C80%333 mm43.6
Aug28.7°C22.3°C87%309 mm3.83
Sep29.3°C21.2°C83%158 mm4.82
Oct30°C17.8°C67%26 mm5.31.4
Nov28.7°C13.9°C55%12 mm4.61.4
Dec27°C10.5°C45%4 mm4.31.6
NASA POWER long-term monthly averages for Dewas (22.97, 76.06).

NVPH material list: 28 × 36 m in Dewas

A 28 m wide, 36 m long naturally ventilated polyhouse (1,008 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSmall Column (76X2.0X4500)36 nos609 kg
GI structureSide Hockey (60X2.0X5500)32 nos549 kg
GI structureBig Bottom (60X2.0X8000)21 nos524 kg
GI structureBig Arc (42X2.0X5200)27 nos292 kg
GI structureGI Gutter Sheet70 mtr—
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)255 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)138 mtr—
Film & netsSide Insect Net (5.2 m)130 mtr—
Film & netsSide Skirting Apron (1.5 m)130 mtr—
Film & netsWhite Shade Net 50%192 mtr—
Fittings & accessoriesAluminium Profile836 mtr—
Fittings & accessoriesGI Spring1,425 mtr—
Fittings & accessoriesF Bracket54 nos—
Fittings & accessoriesClamps 60 mm Half358 nos—
Fittings & accessoriesSelf Drilling Screw1,881 nos—
The largest items of a 28 × 36 m kit (67 items in all, about 4.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Dewas

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Dewas and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Dewas

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Dewas's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~42°C highs
Strongest sun7.2 kWh/m²/day
Wettest month~333 mm
Humid (75%+)July–September
NASA POWER monthly averages for Dewas.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 333 mm, the heaviest rain of the year.

  2. 2

    July to September

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 42°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

Crops for an NVPH in Dewas

Coloured capsicum for Dewas

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 42°C.

Cucumber (parthenocarpic) for Dewas

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Dewas

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Dewas?

Dewas is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 42°C down to about 30°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~30°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in DewasCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Dewas

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

From our Satara factory to Dewas is about 780 km by road, so a dispatched load normally arrives in about 3 days. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.

Dewas within Madhya Pradesh

Dewas is mid-table for heat in Madhya Pradesh (56th of 84), and in the middle for rain (44th). These are the larger towns we supply elsewhere in Madhya Pradesh.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Dewas's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (42°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Dewas?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Dewas take?

About 780 km by road from our Satara factory, so usually in about 3 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Dewas?

We recommend it: 3 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

NVPH materials near Dewas

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom DewasHottest monthHumid monthsSuits
NVPH materials in Indore~50 kmMay, 42°C3NVPH + fan & pad
NVPH materials in Tarana~50 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Ujjain~50 kmMay, 42°C3NVPH + fan & pad
NVPH materials in Rau~60 kmMay, 41°C3NVPH + fan & pad
NVPH materials in Mhow Cantonment~70 kmMay, 41°C3NVPH + fan & pad
NVPH materials in Mhowgaon~70 kmMay, 41°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Dewas
  2. Kryzen: Polyhouse farming in Dewas
  3. NASA POWER monthly climate averages for Dewas
  4. NHB cost norms for protected cultivation
Build your kit