Subsidy guide · Indore district, Madhya Pradesh
Planning an NHB subsidy polyhouse project in Indore
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
For an Indore commercial protected-cultivation project, first decide whether MIDH or NHB fits the area and finance plan, then apply before any construction starts. Indore’s 42.3°C May afternoons make cooling and crop selection important: a naturally ventilated polyhouse is usually the first choice, while fan-and-pad cooling suits growers targeting summer production.
- NHB route
- Projects above 2,500 m²
- MIDH / NHM route
- Up to 4,000 m² per farmer
- Cost norms here
- General area
- Structure for this climate
- NVPH or fan & pad

Start with scheme choice, area and finance
MIDH/NHM and NHB both provide assistance at 50% of the applicable cost or project norm, but the route is different. MIDH is the state-mission route for individual farmers, groups and FPOs, with assistance up to 4,000 m² per beneficiary. Apply through the Indore district horticulture office.
NHB is intended for commercial projects above 2,500 m². It is open to farmers, companies, FPOs and entrepreneurs, but the assistance is credit-linked and back-ended: a term loan is needed, and the subsidy is credited to that loan after completion and inspection. The NHB scheme guidelines state a ceiling of ₹56 lakh per project; confirm the current limit and norms before applying because they can change.
An area between 2,500 m² and 4,000 m² can require a practical comparison of both routes. Discuss the proposed area, crop, DPR and borrowing plan with the district horticulture office and bank before deciding. Do not treat subsidy as an amount available upfront for construction.
- Choose MIDH for the state-process route and projects within its 4,000 m² beneficiary limit.
- Choose NHB where the project is commercial, above 2,500 m² and supported by a term loan.
- For NHB, In-Principle Approval (IPA) must come before work starts.
| MIDH / NHM (state mission) | NHB commercial project | |
|---|---|---|
| Who it is for | Individual farmers, groups, FPOs | Commercial projects: farmers, companies, FPOs, entrepreneurs |
| Project size | Up to 4,000 m² per beneficiary | Above 2,500 m² (1,000 m² in the North-East) |
| Assistance | 50% of cost, up to the cost norm | 50% of project cost at admissible norms, credit-linked and back-ended |
| Ceiling | Area limit per beneficiary | ₹56 lakh per project in the NHB scheme guidelines; check the current limit |
| Bank loan | Not always needed | Needed: subsidy is credited to the term loan |
| Apply at | the Indore district horticulture office | NHB online portal (In-Principle Approval) and your bank |
What Indore weather means for the structure
Indore is hot and dry before the monsoon. May has an average afternoon high of 42.3°C, 7.3 kWh/m²/day of sun and wind of 4.2 m/s. July to September are humid months, with humidity reaching 80% in July, 87% in August and 83% in September; July alone averages 288 mm of rain and August 275 mm. The structure needs to keep monsoon rain out while retaining workable ventilation.
A naturally ventilated polyhouse is normally the sound first structure here. Its film roof protects the crop from rain, and roof vents with roll-up curtains move air without depending on power. For an intensive summer crop programme, a fan-and-pad polyhouse is a stronger option. In May, fans drawing air through wet pads can reduce a 42°C afternoon to about 30°C inside, which is useful for leafy greens.
Nethouses have a more seasonal role. October to February is Indore’s favourable nethouse period because rainfall is low. A square nethouse is the NHB nursery design, while a curved nethouse gives taller crops more air and can use shade in the high-sun May period. Choose the design around the crop calendar, not only the lower initial structure cost.

Naturally ventilated polyhouse
Best fitFilm roof keeps monsoon rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Indore.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 42°C afternoon down to about 30°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from October to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
Read the climate month by month before fixing crops
The climate table below is useful when matching planting and harvest windows to the protected structure. January nights average 10.7°C and December nights 11.7°C, while April and May afternoons average 40.8°C and 42.3°C. June starts the wetter period with 129 mm of rain, followed by the humid July–September stretch.
For an NHB DPR, this monthly logic should appear in the crop plan: how the selected structure handles heat, rain, humidity and ventilation, and why the chosen crop needs that protection. A crop plan that simply lists crops without a season or market rationale is less useful for bank appraisal and project implementation.
- Dry, high-sun period: March to May.
- Highest humidity and rain: July to September.
- Lower-rain nethouse window: October to February.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 27.8°C | 10.7°C | 36% | 5 mm | 4.5 | 2 |
| Feb | 31.7°C | 13.8°C | 28% | 3 mm | 5.4 | 2.1 |
| Mar | 36.3°C | 18.4°C | 23% | 7 mm | 6.4 | 2.2 |
| Apr | 40.8°C | 23.3°C | 21% | 4 mm | 7.1 | 2.9 |
| May | 42.3°C | 26.4°C | 30% | 11 mm | 7.3 | 4.2 |
| Jun | 36.7°C | 25.5°C | 58% | 129 mm | 5.7 | 4.1 |
| Jul | 30.8°C | 23.4°C | 80% | 288 mm | 4.1 | 3.8 |
| Aug | 29°C | 22.6°C | 87% | 275 mm | 3.8 | 3.1 |
| Sep | 29.8°C | 21.7°C | 83% | 158 mm | 4.7 | 2.1 |
| Oct | 30.8°C | 18.5°C | 67% | 26 mm | 5.2 | 1.5 |
| Nov | 29.7°C | 14.8°C | 55% | 12 mm | 4.6 | 1.5 |
| Dec | 28.1°C | 11.7°C | 43% | 4 mm | 4.2 | 1.7 |
A one-acre fan-and-pad example for budgeting
The worked example below uses 3,952 m², about one acre, and a fan-and-pad polyhouse. At the stated structure cost norm of ₹1,400 per m², the eligible structure cost is ₹55,32,800. For high-value vegetables, the planting-material norm is ₹140 per m², adding ₹5,53,280 to give an eligible project cost of ₹60,86,080.
At 50% of the norm, the maximum subsidy in this illustration is ₹30,43,040 (₹30.43 lakh). It is an indicative calculation, not a sanction promise: the approved project, prevailing norms and inspection determine the final amount. The material price shown in the table is ₹32,48,775 including GST, or ₹822/m², ex-factory and without freight or erection.
This example is particularly relevant to an Indore grower considering a one-acre, cooled commercial project. It should not be used to assume that the subsidy covers a fixed share of a supplier’s invoice; eligibility follows the applicable approved norms.
| Item | Amount |
|---|---|
| Structure | Fan and pad polyhouse |
| Area | 3,952 m² (about one acre) |
| Structure cost norm | ₹1,400 per m² |
| Eligible structure cost | ₹55,32,800 |
| Planting material norm (high-value vegetables) | ₹140 per m² → ₹5,53,280 |
| Eligible project cost | ₹60,86,080 |
| Maximum subsidy at 50% of the norm | ₹30,43,040 (₹30.43 lakh) |
| Our material price this week (incl. GST) | ₹32,48,775 (₹822/m²) |
Planting-material norms and crop groups that fit Indore
For high-value vegetables, the NHB planting-material norm is ₹140 per m². This group suits Indore and includes coloured capsicum, parthenocarpic cucumber, lettuce and leafy greens. A fan-and-pad structure gives the best scope where summer heat management is central; a naturally ventilated polyhouse is the usual option where the farmer wants rain protection and passive ventilation.
The table below also lists floriculture groups. Orchid and anthurium, with a ₹700 per m² norm, are less suited to Indore. The carnation and gerbera group has a ₹610 per m² norm, and the rose and lilium group has a ₹426 per m² norm; the local suitability guidance identifies gerbera and rose. Select the crop only after checking labour, water quality, disease management and the buyer or mandi route.
For the DPR, identify the crop group precisely because planting-material norms are crop-group specific. Keep the crop plan, quotation, financing and approved project aligned; changing the intended crop or structure after approval can create difficulties at inspection.
| Crop group | NHB norm | Suits Indore? |
|---|---|---|
| High-value vegetables | ₹140 per m² | Yes: Coloured capsicum, Cucumber (parthenocarpic), Lettuce and leafy greens |
| Orchid and anthurium | ₹700 per m² | Less suited |
| Carnation and gerbera | ₹610 per m² | Yes: Gerbera and rose |
| Rose and lilium | ₹426 per m² | Yes: Gerbera and rose |
Use Indore mandi seasons as a selling signal, not a guarantee
Indore district has several relevant fruit-and-vegetable markets, including Sanwer(F&V) APMC, Indore(F&V) APMC, Mhow (Ambedkar Nagar) (F&V) APMC, Mhow(F&V) APMC and Gautampura(F&V) APMC. The mandi table below compiles daily-price observations from the last two years for markets in the district. These are modal-price indications in ₹ per quintal, not assured farm-gate prices.
For vegetables aligned with protected cultivation, tomato had its highest recorded month in December at ₹2,652/q and lowest in February at ₹1,094/q. Green chilli peaked in March at ₹4,718/q, while coriander leaves peaked in March at ₹6,050/q. Green peas were highest in November at ₹4,886/q. These months can help shape planting and harvest targets, but they do not replace a buyer plan.
Do not select a crop solely because one month has the highest price. Check whether your likely harvest volume, quality grade, transport and harvest timing can reach the relevant market. A protected crop plan is stronger when it targets a market window while also allowing for the low-price months shown in the data.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Cauliflower | 7 | ₹1,054/q | Dec (₹1,371) | Oct (₹879) |
| Tomato | 8 | ₹1,768/q | Dec (₹2,652) | Feb (₹1,094) |
| Green chilli | 7 | ₹3,054/q | Mar (₹4,718) | Dec (₹1,994) |
| Green peas | 15 | ₹3,859/q | Nov (₹4,886) | Jul (₹3,487) |
| Bottle gourd | 8 | ₹1,390/q | Oct (₹1,672) | Dec (₹1,192) |
| Okra (bhindi) | 8 | ₹2,346/q | Jan (₹3,617) | Dec (₹1,333) |
| Spinach | 7 | ₹931/q | Jul (₹1,169) | May (₹716) |
| Brinjal | 8 | ₹1,104/q | Jan (₹1,331) | Apr (₹922) |
| Cabbage | 6 | ₹909/q | Jan (₹1,273) | Apr (₹686) |
| Coriander (leaves) | 13 | ₹3,664/q | Mar (₹6,050) | Aug (₹1,736) |
The application order: IPA first, construction later
For MIDH, submit the application through the Indore district horticulture office before beginning the project. For NHB, file for In-Principle Approval on the NHB portal before work starts; IPA has been required before starting work since 2017. This sequencing is essential. A built structure cannot be made subsidy-eligible merely by applying afterwards.
First settle the structure type, area, crop plan and quotation. Prepare a detailed project report for NHB that covers costs, the high-value-vegetable crop plan and repayment. Obtain term-loan sanction from the bank. Build to the approved standard, retain material test certificates and invoices, and then proceed to inspection. After joint inspection, NHB subsidy is released into the bank loan account; MIDH release follows the state process.
Polyhouse Constructions is a manufacturer of material kits, not an Indore office. Material is supplied from the Satara factory, and construction or erection is carried out by Kryzen Biotech’s construction team. Keep the approved drawing and specification consistent with the supplied material and site work.
- Do not place construction ahead of NHB IPA.
- For NHB, arrange term-loan sanction as part of the project process.
- Keep records through purchase, erection and inspection.
- 1
Pick the structure and size
Match it to Indore's climate (see above) and your market. Keep under 4,000 m² for MIDH, or above 2,500 m² for an NHB project.
- 2
Get a quotation and project report
A supplier quotation listing every item with its HSN code, and for an NHB project a DPR covering cost, the high-value vegetables crop plan and repayment.
- 3
Apply before you build
MIDH: apply at the Indore district horticulture office. NHB: file for In-Principle Approval on the NHB portal; NHB has required IPA before work starts since 2017.
- 4
Bank loan (NHB)
Get the term loan sanctioned. The subsidy is back-ended: it is paid into the loan account after the project is complete.
- 5
Build to standard
Use materials that meet BIS standards and keep the test certificates; the inspection checks structure and specification.
- 6
Inspection and release
After a joint inspection, the subsidy is released to your bank (NHB) or to you (MIDH, as per the state process).

Documents and mistakes that can hold up a claim
Prepare the land and identity records early: Khasra and B-1 in Madhya Pradesh, or a registered lease, along with a site map. The file also needs Aadhaar, PAN and bank details; companies and FPOs need their registration papers. Soil and water test reports, an itemised supplier quotation with HSN codes and specifications, and post-purchase invoices and test certificates are central records.
For NHB, add the detailed project report and bank sanction letter. Ask for an itemised quotation rather than a lump-sum sheet. Polyhouse Constructions provides complete GI structure, polyfilm, nets and fittings as a material kit, with an itemised quotation, technical data sheets and lab test certificates with dispatch. Its GI structure uses ISI-marked branded steel from Tata, Jindal and JSW; construction is by Kryzen Biotech’s team.
Common avoidable errors are starting before IPA, choosing a structure that differs from the approved plan, submitting incomplete land or lease documents, relying on a quotation without HSN codes, and failing to preserve certificates and invoices. Confirm current norms with the state horticulture department before filing, since norms and limits are revised from time to time.
- Land records in your name (in Madhya Pradesh: Khasra and B-1), or a registered lease, with a site map
- Aadhaar, PAN and bank details; for companies and FPOs, registration papers
- Soil and water test report
- Supplier quotation with HSN codes and specifications
- Detailed project report and bank sanction letter (NHB)
- Test certificates and invoices for the material, after purchase

Itemised quotation
Every item with size, quantity, HSN code and GST, ready to attach to the application.

Lab test certificates
Tensile, chemical, salt spray and other tests on the steel, by third-party labs.

ISI-marked GI
GI pipes from Tata, Jindal or JSW steel, with a 15-year warranty.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Can I apply for NHB subsidy for a 3,952 m² polyhouse in Indore?
NHB commercial projects are for areas above 2,500 m², so 3,952 m² meets that project-size condition. You need an NHB IPA before work starts and a term loan, because the subsidy is credit-linked and back-ended.
Should I use MIDH or NHB for a project below 4,000 m²?
MIDH assistance is available up to 4,000 m² per beneficiary through the Indore district horticulture office. NHB applies to commercial projects above 2,500 m², so for an area in the overlap, compare the state-process route with the NHB loan-based route before filing.
What is the subsidy in the one-acre fan-and-pad illustration?
For 3,952 m², the example gives an eligible project cost of ₹60,86,080 and a maximum 50% subsidy of ₹30,43,040 (₹30.43 lakh). It is indicative only; approval, current norms and inspection decide the sanctioned amount.
Which polyhouse is practical for Indore’s May heat?
A naturally ventilated polyhouse is usually the first choice in Indore for rain protection and passive ventilation. For summer production needing stronger cooling, a fan-and-pad polyhouse can bring a 42°C May afternoon down to about 30°C inside.
Which papers should I take to the district horticulture office?
Carry Khasra and B-1 or a registered lease with site map, Aadhaar, PAN, bank details, soil and water reports, and an itemised quotation with HSN codes and specifications. For an NHB project, also prepare the DPR and bank sanction letter; retain invoices and test certificates after purchase.
Subsidy projects near Indore
The same guide for nearby towns, with the structure that suits each.
| Town | From Indore | District | Cost norms | Suits |
|---|---|---|---|---|
| Subsidy project in Rau | ~10 km | Indore | General | NVPH or fan & pad |
| Subsidy project in Mhow Cantonment | ~20 km | Indore | General | NVPH or fan & pad |
| Subsidy project in Mhowgaon | ~20 km | Indore | General | NVPH or fan & pad |
| Subsidy project in Pithampur | ~20 km | Dhar | General | NVPH or fan & pad |
| Subsidy project in Dewas | ~50 km | — | General | NVPH or fan & pad |
| Subsidy project in Ujjain | ~70 km | Ujjain | General | NVPH or fan & pad |
