Polyhouse material · Madhya Pradesh
Polyhouse Material Supplier in Dewas
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
This page is for farmers in Dewas who want polyhouse material from the manufacturer rather than through a dealer. We make the GI structure at our Satara factory and send the film, nets and fittings with it, so your order is one list and one invoice. Dewas is about 780 km away; expect delivery in about 3 days after dispatch.
- Distance from factory
- ~780 km by road
- Delivery after dispatch
- ~3 days
- Hottest month
- May, ~42°C
- Climate pick
- NVPH + fan & pad
Polyhouse systems we supply in Dewas
Each kit comes with the full GI structure, covering and fittings. Here is how each one suits Dewas's climate.

Naturally ventilated polyhouse
Best fitFilm roof keeps monsoon rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Dewas.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 42°C afternoon down to about 30°C inside, cool enough for leafy greens.

Square nethouse
Good fitFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Low rain here keeps it useful most of the year.

Curved nethouse
Good fitArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
Plants you can grow in Dewas
Picked for Dewas's weather: May highs of about 42°C and 1,014 mm of rain a year.

Coloured capsicum
NVPH
Grow under shade net through May, when highs reach 42°C.

Cucumber (parthenocarpic)
NVPH
Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Lettuce and leafy greens
Fan & pad polyhouse
Pads bring May afternoons down to about 30°C, so greens can grow through summer.

Gerbera and rose
NVPH
Cut flowers with year-round demand from city florists and events.
🌱 Vegetable seedlings
Square nethouse
Raise healthy nursery seedlings for local farmers all year.
Polyhouse Construction vs a local fabricator in Dewas
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | ✓30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | ✓Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | ✓15-year manufacturing warranty | Rarely a written warranty |
| Engineering | ✓In-house engineering team | No design or load checks |
| Manufacturing | ✓In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | ✓32-point QA checklist for every part | Visual check at best |
| Lab certificate | ✓Lab test certificate with every dispatch | Not provided |
| Technical sheet | ✓Technical data sheet for every product | Not available |
| Material match | ✓Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | ✓Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | ✓Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | ✓Backed by industry leader Kryzen Biotech | Single-owner workshop |
Dewas's growing year at a glance
Plan film, shading and planting around these months. keep curtains and vents ready for the humid stretch from July to September.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~42°C highs | ||||||||||||
| Strongest sun | 7.2 kWh/m²/day | ||||||||||||
| Wettest month | ~333 mm | ||||||||||||
| Humid (75%+) | July–September |
From NASA POWER monthly averages for Dewas.
Choosing polyhouse material for Dewas's weather
For Dewas, the numbers that shape the material list are May afternoons of about 42°C (26% humidity), roughly 1,014 mm of rain a year with July the wettest month.
| Part | What we supply | Why in Dewas |
|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Sunlight peaks in May at about 7.2 kWh per m² a day; diffused film spreads it and cuts leaf scorch. |
| Shading | Aluminium (reflective) shade net | 42°C highs and strong sun: a reflective net sends heat back out instead of holding it inside. |
| Gutters | GI gutter sheet with funnels | About 1,014 mm of rain a year; keep gutters clear before the monsoon. |
| Ventilation | Roll-up side curtains, side insect net | Humid spell from July to September; open the curtains fully in those months. |
Mandi price seasons around Dewas
Prices at the mandis in Dewas district follow a clear yearly pattern. Green chilli is the extreme case, from ₹1,568 per quintal in June up to ₹4,239 in February (170% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Cauliflower | 4 | ₹1,239/q | Aug · ₹1,506 | Jun · ₹835 | 80% |
| Tomato | 4 | ₹1,301/q | Aug · ₹2,114 | Mar · ₹926 | 128% |
| Cabbage | 4 | ₹909/q | Oct · ₹1,225 | Jun · ₹591 | 107% |
| Okra (bhindi) | 4 | ₹1,491/q | Mar · ₹2,638 | Sep · ₹1,021 | 158% |
| Brinjal | 4 | ₹811/q | Feb · ₹930 | Jun · ₹634 | 47% |
| Green chilli | 4 | ₹2,458/q | Feb · ₹4,239 | Jun · ₹1,568 | 170% |
| Green peas | 6 | ₹3,226/q | Dec · ₹3,944 | Feb · ₹2,355 | 67% |
| Coriander (leaves) | 2 | ₹7,735/q | Jul · ₹10,912 | Nov · ₹5,997 | 82% |
A planting calendar built on local prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, cauliflower peaks in August; at about 75 days to first harvest, transplant in May.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Cauliflower | Mar, Aug, Sep, Oct | ~75 | May | Jun |
| Tomato | Aug | ~75 | May | Mar |
| Cabbage | Aug, Sep, Oct | ~75 | July | Jun |
| Okra (bhindi) | Feb, Mar | ~45 | January | Sep |
| Brinjal | Feb, Mar, Aug, Sep, Oct | ~60 | December | Jun |
| Green chilli | Feb | ~75 | November | Jun |
| Green peas | Oct, Dec | ~60 | October | Feb |
| Coriander (leaves) | Jul | ~35 | May | Nov |
Twelve months of weather in Dewas
May is the hottest month, with afternoons around 42.1°C; January nights drop to about 9.4°C. July is the wettest (333 mm of 1,014 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 26.5°C | 9.4°C | 39% | 7 mm | 4.5 | 1.9 |
| Feb | 30.5°C | 12.5°C | 31% | 5 mm | 5.4 | 2 |
| Mar | 35.3°C | 17.4°C | 24% | 8 mm | 6.4 | 2.2 |
| Apr | 40.1°C | 22.8°C | 20% | 4 mm | 7.1 | 2.8 |
| May | 42.1°C | 26.5°C | 26% | 12 mm | 7.2 | 4 |
| Jun | 36.8°C | 25.5°C | 55% | 136 mm | 5.6 | 3.9 |
| Jul | 30.6°C | 23.1°C | 80% | 333 mm | 4 | 3.6 |
| Aug | 28.7°C | 22.3°C | 87% | 309 mm | 3.8 | 3 |
| Sep | 29.3°C | 21.2°C | 83% | 158 mm | 4.8 | 2 |
| Oct | 30°C | 17.8°C | 67% | 26 mm | 5.3 | 1.4 |
| Nov | 28.7°C | 13.9°C | 55% | 12 mm | 4.6 | 1.4 |
| Dec | 27°C | 10.5°C | 45% | 4 mm | 4.3 | 1.6 |
Polyhouse subsidy for Dewas farmers
Under the Mission for Integrated Development of Horticulture (MIDH), farmers in Madhya Pradesh can get 50% of the government cost norm for naturally ventilated polyhouses (₹1,000–1,200 per m²), fan and pad polyhouses (₹1,500–1,800 per m²) and nethouses (₹710 per m²), on up to 2,500 m² per farmer. The subsidy is worked out on the government cost norm for your structure and size, not on your bill.
Commercial projects above 2,500 m² can apply to the National Horticulture Board for a credit-linked subsidy of 50% of the eligible project cost, up to ₹100 lakh per project. Both schemes want materials that meet BIS standards: our GI pipes carry the ISI mark and test reports ship with every order. Apply through the Madhya Pradesh horticulture department or your district horticulture officer before you buy.
Delivery to Dewas
Dewas is about 780 km by road from our factory at Degaon, Satara, on the Pune–Bangalore highway. Once your order is packed, the truck usually reaches Dewas in about 3 days, with the invoice and test reports.
Every load travels with 100% invoice insurance. Send your delivery PIN code with the order and we confirm the vehicle before dispatch.
Get polyhouse material from India's biggest CEA manufacturing company
Choose your structure and size, and get the complete material list in a minute.
FAQs
Do you deliver polyhouse material to Dewas?
Yes. We dispatch from our factory at Degaon, Satara, about 780 km from Dewas by road, and the truck usually arrives in about 3 days. Every load is insured for the invoice value.
Which polyhouse suits Dewas?
A naturally ventilated polyhouse for vine crops, and fan and pad cooling if you grow greens through May: the air is dry enough for pads to bring 42°C down to about 30°C.
Is there a subsidy for polyhouse material in Madhya Pradesh?
Yes. NHM / MIDH pays 50% of the cost norm on up to 2,500 m² per farmer, and NHB gives a 50% credit-linked subsidy for projects above 2,500 m². Apply before buying; we provide the quotation, ISI-marked material and test reports the claim needs.
What warranty do the materials carry?
GI pipes carry a 15-year warranty, polyfilm 2.5 years and nets 3 years.
Can I buy only a few items, like film or nets?
Yes. Use Buy individual items to order film, nets, fittings or pipes on their own, for repairs or an extension.
Can you also build the polyhouse in Dewas?
Yes. Kryzen Biotech's construction team builds polyhouses and nethouses across India, including Madhya Pradesh. See the link to polyhouse construction in Dewas below.
Polyhouse material near Dewas
Supplying a farm outside Dewas? These nearby towns, with their own weather, are on the same delivery route.
| Town | From Dewas | Hottest month | Rain a year | Suits |
|---|---|---|---|---|
| Polyhouse material in Indore | ~50 km | May, 42°C | 922 mm | NVPH + fan & pad |
| Polyhouse material in Tarana | ~50 km | May, 43°C | 959 mm | NVPH + fan & pad |
| Polyhouse material in Ujjain | ~50 km | May, 42°C | 927 mm | NVPH + fan & pad |
| Polyhouse material in Rau | ~60 km | May, 41°C | 922 mm | NVPH + fan & pad |
| Polyhouse material in Mhow Cantonment | ~70 km | May, 41°C | 922 mm | NVPH + fan & pad |
| Polyhouse material in Mhowgaon | ~70 km | May, 41°C | 922 mm | NVPH + fan & pad |
Want it built as well? Read about polyhouse construction in Dewas on the Kryzen blog.
