How it worksBuy individual items

NVPH materials · Satna district, Madhya Pradesh

Naturally Ventilated Polyhouse Materials Seller in Satna

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Satna, the frame and film are only half the decision; the other half is how the house breathes in May and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Satna.

Hottest month
May, ~43°C
Humid (75%+)
3 months
NVPH material, 1 acre
₹734/m²
Delivery
~5 days
Naturally ventilated polyhouse built with our material, like those we supply to Satna
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

How natural ventilation copes with Satna's weather

In May the air is dry enough (23% humidity) for an NVPH to vent well, but afternoons of 43°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureSatnaMadhya Pradesh average (84 towns)What it means for the NVPH
Hottest-month high43°C (May)42.7°Cclose to the state average
Humidity in that month23%25%Dry air vents easily
Rain a year1,066 mm1,036 mmclose to the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Satna
Cool air enters through the side curtains; warm air leaves through the roof vent.

NVPH material list: 20 × 24 m in Satna

To make it concrete, here is the material for a 20 × 24 m NVPH (480 m²), a common size for growers around Satna. Each item links to its product page with specifications and this week's rate.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

Local market prices for polyhouse crops near Satna

We averaged two years of daily Agmarknet prices from 12 markets in Satna district for crops that are grown under cover. Green chilli swings the most: about ₹6,250 per quintal in June against ₹1,485 in November, a 321% difference. Green peas is the steadiest, which makes it a safer second crop.

CropMarketsAverageHighest monthLowest monthSwing
Green peas25₹3,520/qMay · ₹3,677Dec · ₹3,33710%
Tomato4₹1,086/qJun · ₹1,640Apr · ₹523214%
Brinjal4₹1,059/qNov · ₹1,369May · ₹83065%
Bottle gourd4₹1,102/qSep · ₹1,344Apr · ₹89650%
Cucumber4₹1,162/qJun · ₹1,400Apr · ₹83867%
Okra (bhindi)4₹1,692/qMar · ₹2,625Jul · ₹1,027156%
Green chilli4₹3,429/qJun · ₹6,250Nov · ₹1,485321%
Papaya5₹1,393/qJul · ₹1,540Sep · ₹1,16932%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Satna district. ₹ per quintal (100 kg).

Timing your crop for the Satna market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, green peas peaks in May; at about 60 days to first harvest, transplant in March.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
Green peasJan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec~60MarchDec
TomatoJun~75MarchApr
BrinjalNov~60SeptemberMay
Bottle gourdJun, Sep~55JulyApr
CucumberJun, Sep, Oct~40AprilApr
Okra (bhindi)Feb, Mar~45JanuaryJul
Green chilliJun~75MarchNov
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Satna's weather, month by month

May is the hottest month, with afternoons around 42.9°C; January nights drop to about 8.2°C. July is the wettest (331 mm of 1,066 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan23.6°C8.2°C49%17 mm4.11.5
Feb28.3°C11.7°C41%22 mm5.11.7
Mar34.2°C17.2°C30%15 mm6.21.9
Apr40.1°C23.4°C21%10 mm72.2
May42.9°C28°C23%20 mm72.6
Jun39.2°C28.2°C47%134 mm5.73
Jul32.2°C24.9°C79%331 mm4.52.7
Aug30.4°C24.1°C86%297 mm4.42.3
Sep29.9°C22.6°C84%172 mm4.91.9
Oct29.6°C18.5°C71%36 mm51.4
Nov26.9°C13.4°C60%6 mm4.31.3
Dec24°C9.2°C54%6 mm3.91.4
NASA POWER long-term monthly averages for Satna (24.58, 80.83).

What NVPH material costs this week

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Satna and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Satna

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Changes we would make for Satna

The standard kit suits most of India. For Satna's weather we would adjust a few items — here is the standard choice, what we would pick instead, and why.

PartStandard kitFor SatnaWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 7 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 43°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepJuly brings ~331 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

A season-by-season NVPH plan for Satna

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~43°C highs
Strongest sun7 kWh/m²/day
Wettest month~331 mm
Humid (75%+)July–September
NASA POWER monthly averages for Satna.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 331 mm, the heaviest rain of the year.

  2. 2

    July to September

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 43°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

Crops for an NVPH in Satna

Coloured capsicum for Satna

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 43°C.

Cucumber (parthenocarpic) for Satna

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Satna

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Satna?

Satna is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 43°C down to about 31°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~31°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in SatnaCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Satna

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

Satna is roughly 1,330 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Satna in about 5 days, carrying the invoice, the test reports and 100% invoice insurance.

Across Satna district

Among the 84 towns we supply in Madhya Pradesh, Satna ranks 38th for summer heat and 38th for yearly rain. Other Satna district towns on our list:

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Satna's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (43°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Satna?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Satna take?

About 1,330 km by road from our Satara factory, so usually in about 5 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

NVPH materials near Satna

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom SatnaHottest monthHumid monthsSuits
NVPH materials in Maihar~50 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Rewa~60 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Panna~90 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Katni~120 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Mauganj~140 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Sidhi~140 kmMay, 43°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Satna
  2. Kryzen: Polyhouse farming in Satna
  3. NASA POWER monthly climate averages for Satna
  4. NHB cost norms for protected cultivation
Build your kit