NVPH materials · Ahmedabad district, Gujarat
Naturally Ventilated Polyhouse Material for Ahmedabad
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
A naturally ventilated polyhouse can work well in Ahmedabad for much of the year, but it has to be run actively through the 43.5°C May heat and the humid August–September period. The practical approach is strong roof-and-side ventilation, reflective shade for peak summer, rain-ready gutters, and crop planning around Ahmedabad APMC price seasons.
- Hottest month
- May, ~44°C
- Humid (75%+)
- 2 months
- NVPH material, 1 acre
- ₹734/m²
- Delivery
- ~3 days

Can an NVPH cope with Ahmedabad weather?
Yes, with realistic limits. Ahmedabad is among the hotter locations in Gujarat: May averages a 43.5°C afternoon high, 3.5°C above the state average hottest-month high. The useful part for natural ventilation is that May humidity is only 36%, so hot air can move out through the roof vent while replacement air enters through open side curtains. But ventilation removes heat; it does not give the tighter summer temperature control of a fan-and-pad house.
April and May are the stress months. April averages 41.7°C with 7.3 kWh/m²/day of sun, rising to 7.5 in May. Keep the roof vent clear, roll both side curtains fully up in suitable weather, and use shade over the crop. January is the opposite end: the average night low is 11.1°C. A grower should not leave the house unnecessarily open through cool nights if the crop needs protection.
Rain is moderate over the year at 770 mm, but concentrated in the monsoon. July alone averages 267 mm and August 256 mm. Then August and September bring 83% and 79% humidity respectively. The structure can shed rain and keep foliage dry, but side curtains must be managed around rain, and airflow becomes especially important for disease prevention.
- January–February: dry, cool nights and mild days; use available daylight and avoid prolonged night opening.
- March–May: dry, very hot conditions; maximise ventilation and deploy shade.
- June–July: rainfall rises sharply; inspect drainage and open curtains whenever rain allows.
- August–September: the most humid stretch; prioritise air movement and crop spacing.
- October–December: drier growing weather; Ahmedabad’s nethouse season is October–February.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 28.8°C | 11.1°C | 31% | 1 mm | 4.6 | 2 |
| Feb | 32.6°C | 14°C | 26% | 1 mm | 5.6 | 2 |
| Mar | 37.4°C | 18.8°C | 24% | 5 mm | 6.6 | 2.1 |
| Apr | 41.7°C | 23.4°C | 27% | 3 mm | 7.3 | 2.4 |
| May | 43.5°C | 26.7°C | 36% | 4 mm | 7.5 | 3.5 |
| Jun | 39.2°C | 28°C | 54% | 96 mm | 6.3 | 3.9 |
| Jul | 33.8°C | 25.8°C | 74% | 267 mm | 4.5 | 3.6 |
| Aug | 31.6°C | 24.5°C | 83% | 256 mm | 4.3 | 2.8 |
| Sep | 32.3°C | 23.7°C | 79% | 122 mm | 5.2 | 1.9 |
| Oct | 33.8°C | 20.6°C | 60% | 10 mm | 5.6 | 1.3 |
| Nov | 32.1°C | 16.4°C | 46% | 4 mm | 4.7 | 1.6 |
| Dec | 29.3°C | 12.4°C | 38% | 1 mm | 4.3 | 1.8 |
A month-by-month curtain, vent and shade routine
From January to February, days average 28.8–32.6°C while nights fall to 11.1–14°C. Open for daytime light and air, then avoid leaving curtains wide open through a cool night when the crop needs a warmer protected environment. March becomes hotter at 37.4°C, so start extending daytime opening and prepare shade before the severe heat arrives.
During April and May, make maximum natural airflow the first task: keep roof vents unobstructed, roll side curtains fully up, and close the shade net or second shade layer over the crop. Irrigate early in the day. May also has the strongest sun and about 44°C highs, so natural ventilation should be viewed as heat relief rather than full temperature control.
Before the July peak rain, clear gutters and funnels, examine polyfilm for tears, and tighten GI springs. In rainy spells, lower curtains enough to stop rain entry, then reopen as soon as conditions permit. In August–September, humidity remains at 75% or more; open side curtains whenever it is not raining and maintain wider plant spacing to reduce fungal disease. October through February is the easier, dry-to-mild working period for main planting and structural maintenance.
- Do not block the roof vent with stored material or a permanently closed shade layer.
- Operate the second shade layer by season with ropes and pulleys rather than keeping it closed all year.
- Check gutters before June, not after the first heavy rain.
- Use a double-door entry cabin if frequent movement into the house makes insect entry a concern.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~44°C highs | ||||||||||||
| Strongest sun | 7.5 kWh/m²/day | ||||||||||||
| Wettest month | ~267 mm | ||||||||||||
| Humid (75%+) | August–September | ||||||||||||
| Nethouse season | October–February |
- 1
Before July
Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 267 mm, the heaviest rain of the year.
- 2
August to September
Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.
- 3
May
Peak heat, about 44°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.
- 4
October to February
The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.
Material specification that suits this heat and monsoon
For Ahmedabad, retain the standard 250-micron white diffused, UV-stabilised roof polyfilm. It spreads the intense May light more evenly. The side insect net, side skirting apron, roof vent, side curtains, GI gutter sheet and funnels are all working parts of the climate response: they control insect entry, airflow and monsoon runoff.
The important upgrade is shade. The standard white 50% shade net can be changed to aluminium shade net, which reflects heat outward in peak summer. Add a second net layer that can be opened or closed seasonally with ropes and pulleys. This is more useful than treating shade as a fixed, year-round cover, because Ahmedabad also has cool, relatively low-sun winter days.
FRP doors are appropriate to keep in the specification. For the structure, Polyhouse Constructions supplies ISI-marked GI pipes from Tata, Jindal and JSW. GI structure warranty is 15 years; polyfilm warranty is 2.5 years and nets carry a 3-year warranty. Every dispatch has a lab test certificate and each product has a technical data sheet.
- Keep: roof vent plus side curtains for natural air movement.
- Change: white 50% shade net to aluminium reflective shade net for Ahmedabad heat.
- Add: a seasonally operated double shade layer.
- Keep: GI gutters and funnels; July rain makes pre-monsoon cleaning essential.
- Optional: double-door entry cabin for better insect exclusion.
| Part | Standard kit | For Ahmedabad | Why |
|---|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Keep | Spreads May's 7.5 kWh/m²/day of sunlight evenly |
| Shade net | White 50% | Aluminium Shade Net (4 m) | Reflects heat back out at 44°C |
| Second net layer | None | Add (double layer) | Open or close it by the season with ropes and pulleys |
| Air circulation | Roof vent + curtains | Keep | Natural airflow is enough |
| Doors | FRP (fibre) doors | Keep FRP | FRP lasts well in this climate |
| Gutters | GI gutter sheet + funnels | Keep | July brings ~267 mm; clean before June |
| Entry cabin | Optional | Optional | A double door keeps whitefly and thrips out when people walk in |
What is included in a live NVPH material kit?
A complete kit is not just pipes and film. The 28 × 36 m example, covering 1,008 m², has 67 items in all and about 4.8 tonnes of steel and fittings. Its largest structural lines include 36 small columns, 32 side hockey pipes, 21 big bottom pipes and 27 big arcs; it also includes GI gutter sheet, polyfilm, insect net, skirting apron, shade net, aluminium profile, GI spring, brackets, clamps and self-drilling screws.
The table below is a representative material list for that size. The online kit builder at polyhouseconstructions.com provides every line, quantity, weight and weekly rate for the exact span and bay selected. Material is manufactured at the Degaon factory on the Pune–Bangalore Highway, Tal. Wai, Satara, and Ahmedabad is 750 km away; delivery is 3 days after dispatch. Freight and erection are separate from material.
Polyhouse Constructions is a venture of Kryzen Biotech Pvt Ltd. In-house engineering and manufacturing, a 32-point QA check, counted parts per design, and technical documents help a farmer compare a full kit with an on-site fabricated structure. Erection is carried out by Kryzen Biotech’s construction team.
- Book with 5% advance; the remaining 95% is due before dispatch.
- Rates follow weekly GI and plastic rates and are updated every Friday.
- A 5% bulk discount applies on 10 or more units of an item.
| Group | Item | Quantity | Weight |
|---|---|---|---|
| GI structure | Small Column (76X2.0X4500) | 36 nos | 609 kg |
| GI structure | Side Hockey (60X2.0X5500) | 32 nos | 549 kg |
| GI structure | Big Bottom (60X2.0X8000) | 21 nos | 524 kg |
| GI structure | Big Arc (42X2.0X5200) | 27 nos | 292 kg |
| GI structure | GI Gutter Sheet | 70 mtr | — |
| Film & nets | Polyfilm White Diffused 250 Micron (4.5 m) | 255 mtr | — |
| Film & nets | Polyfilm White Diffused 250 Micron (5.5 m) | 138 mtr | — |
| Film & nets | Side Insect Net (5.2 m) | 130 mtr | — |
| Film & nets | Side Skirting Apron (1.5 m) | 130 mtr | — |
| Film & nets | White Shade Net 50% | 192 mtr | — |
| Fittings & accessories | Aluminium Profile | 836 mtr | — |
| Fittings & accessories | GI Spring | 1,425 mtr | — |
| Fittings & accessories | F Bracket | 54 nos | — |
| Fittings & accessories | Clamps 60 mm Half | 358 nos | — |
| Fittings & accessories | Self Drilling Screw | 1,881 nos | — |
This week’s Ahmedabad NVPH material prices
The table below gives this week’s ex-factory material-only rates, including GST. A 20 × 24 m, 480 m² kit is ₹4,68,814, or ₹977/m². The 28 × 36 m, 1,008 m² kit is ₹8,59,963, or ₹853/m². A 52 × 76 m house of 3,952 m², roughly one acre, is ₹28,99,897, or ₹734/m².
The lower per-m² figure at larger size is because gutters, end frames and doors are shared across more covered area. These figures do not include freight to Ahmedabad or erection. Since GI and plastic rates are revised weekly, use the current kit-builder output for a final material list and rate rather than relying on an older quotation.
- Small: 20 × 24 m | 480 m² | ₹4,68,814 material including GST.
- Medium: 28 × 36 m | 1,008 m² | ₹8,59,963 material including GST.
- About 1 acre: 52 × 76 m | 3,952 m² | ₹28,99,897 material including GST.
| Size | Span × bay | Area | Material incl. GST | Per m² |
|---|---|---|---|---|
| Small | 20 × 24 m | 480 m² | ₹4,68,814 | ₹977 |
| Medium | 28 × 36 m | 1,008 m² | ₹8,59,963 | ₹853 |
| About 1 acre | 52 × 76 m | 3,952 m² | ₹28,99,897 | ₹734 |
Price your own size for Ahmedabad
Choose span and bay and get the full list with quantities, weights and rates in a minute.
Crops to assess against Ahmedabad mandi seasons
Crop selection should combine climate tolerance, crop husbandry and the selling month—not just the highest observed mandi price. In Ahmedabad district’s two reported markets, okra has the strongest listed average modal price at ₹4,197/q and its high month is December at ₹5,844/q. Bitter gourd averages ₹3,122/q and reaches ₹4,015/q in February. These can suit the dry, milder October–February stretch if the crop calendar is aligned with harvest timing.
Capsicum has an average modal price of ₹3,720/q, with the high reported in July at ₹5,763/q, while green chilli averages ₹3,319/q and peaks in July at ₹5,046/q. Summer capsicum needs careful shade and ventilation in Ahmedabad; a grower seeking tighter May temperature control should compare fan and pad rather than assume every crop will respond the same in an NVPH.
Cucumber is a fast 3–4 month NVPH crop, with an Ahmedabad district average modal price of ₹2,181/q and a June high of ₹3,055/q. Tomato’s average is ₹2,094/q and its high is December at ₹3,280/q, but its listed March low is ₹676/q. Plan sowing and harvest dates against the likely market window, while remembering that historical price observations are not a price guarantee.
- Winter-window options to evaluate: tomato, okra, bitter gourd and capsicum.
- For monsoon harvest possibilities, compare the July high months for capsicum and green chilli with crop risk and humidity management.
- Avoid planning a crop solely for March if its district price history is weak: tomato, cabbage, cauliflower, bottle gourd and cucumber all show their listed low month in March.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Tomato | 2 | ₹2,094/q | Dec (₹3,280) | Mar (₹676) |
| Okra (bhindi) | 2 | ₹4,197/q | Dec (₹5,844) | May (₹3,123) |
| Bitter gourd | 2 | ₹3,122/q | Feb (₹4,015) | Sep (₹2,266) |
| Cabbage | 2 | ₹1,129/q | Nov (₹1,912) | Mar (₹516) |
| Cauliflower | 2 | ₹1,886/q | Nov (₹2,795) | Mar (₹1,059) |
| Bottle gourd | 2 | ₹1,626/q | Sep (₹2,173) | Mar (₹1,154) |
| Brinjal | 2 | ₹2,217/q | Nov (₹3,298) | Mar (₹1,209) |
| Green chilli | 2 | ₹3,319/q | Jul (₹5,046) | Sep (₹1,929) |
| Capsicum | 2 | ₹3,720/q | Jul (₹5,763) | Feb (₹1,701) |
| Cucumber | 2 | ₹2,181/q | Jun (₹3,055) | Mar (₹1,136) |
NVPH or fan and pad for an Ahmedabad project?
Choose naturally ventilated construction when the crop can work with roof-vent and side-curtain cooling, no electricity use for cooling, and active shade management. It is listed as suitable here for capsicum, cucumber, tomato and flowers. The indicative one-acre NVPH material price is ₹28,99,897, or ₹734/m².
Fan and pad is the more controlled option for Ahmedabad’s May heat. Exhaust fans and wet pads are listed to bring May inside conditions to about 33°C, compared with an outside average high of about 44°C. It has electricity demand for fans and a pump, and the listed one-acre material price is ₹32,48,775, or ₹822/m². It is better suited to leafy greens and crops needing tighter summer control.
The decision is therefore not simply which structure is cheaper. It is whether the planned crop, planting calendar and ability to manage curtains and shade can tolerate a naturally ventilated house in April–May and the humid monsoon months. If year-round tight control is central to the crop plan, fan and pad deserves a proper comparison.
- NVPH cooling: roof vent and side curtains; no power for cooling.
- Fan-and-pad cooling: exhaust fans and wet pads; electricity and pump required.
- Ahmedabad’s dry May air helps ventilation, but its 43.5°C average high remains the key constraint.
| Naturally ventilated | Fan & pad | |
|---|---|---|
| Cooling | Roof vent and side curtains (no power) | Exhaust fans and wet pads, ~33°C inside in May |
| Running cost | None for cooling | Electricity for fans and a pump |
| Material price, 1 acre | ₹28,99,897 (₹734/m²) | ₹32,48,775 (₹822/m²) |
| Suits in Ahmedabad | Capsicum, cucumber, tomato, flowers | Leafy greens and crops needing tight control in summer |
Planning support, subsidy and district links
For eligible protected-cultivation projects, MIDH/NHM gives 50% of the cost norm up to 4,000 m² per beneficiary. For commercial projects above 2,500 m², NHB guidelines provide a credit-linked back-ended subsidy of 50% of project cost at admissible norms, capped at ₹56 lakh per project; In-Principle Approval from NHB is needed before starting. The stated NHB NVPH tubular norm is ₹844/m². Norms can change, so confirm current eligibility and process with the state horticulture department before committing work.
Ahmedabad is the district headquarters, and this page is also relevant to farmers comparing locations around Adalaj, Gandhinagar, Sanand, Mahemdabad and Kadi. Within Ahmedabad district, material pages are available for Sanand and Viramgam. Obtain approvals before construction where the selected scheme requires it, rather than treating a subsidy as assured after the house is built.
- MIDH/NHM: 50% of cost norm, up to 4,000 m² per beneficiary.
- NHB commercial threshold: above 2,500 m²; approval is required before starting.
- Confirm the latest scheme norms with the state horticulture department.
Subsidy for a project in Ahmedabad
Which scheme fits your size, a worked example and the steps to apply.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Will natural ventilation be enough in Ahmedabad’s May heat?
It helps because May is relatively dry at 36% humidity, and roof vents with fully open side curtains can move hot air out. However, May averages 43.5°C, so use aluminium shade and a second adjustable shade layer; choose fan and pad if the crop needs tighter summer temperature control.
What should I do during Ahmedabad’s August and September humidity?
August averages 83% humidity and September 79%. Keep side curtains open whenever it is not raining, maintain good crop spacing, and inspect the crop closely for fungal disease; July–August rainfall also makes clean gutters and intact film important.
What is the price of naturally ventilated polyhouse material for Ahmedabad?
This week, material including GST is ₹4,68,814 for 480 m², ₹8,59,963 for 1,008 m², and ₹28,99,897 for 3,952 m². These are ex-factory material rates; freight to Ahmedabad and erection are extra, and weekly GI and plastic rates can change.
Which crops should I consider for an Ahmedabad NVPH?
Capsicum, cucumber, tomato and flowers are listed as suitable NVPH options here. Ahmedabad district mandi data also shows strong seasonal reference points such as December for okra at ₹5,844/q and February for bitter gourd at ₹4,015/q, but planting should be planned for the intended harvest month rather than price alone.
How long will delivery to Ahmedabad take, and who erects the structure?
Material is supplied from the Satara factory, 750 km from Ahmedabad, with delivery stated as 3 days after dispatch. Construction and erection are done by Kryzen Biotech’s construction team; Polyhouse Constructions does not have an Ahmedabad office.
NVPH materials near Ahmedabad
Neighbouring towns on the same delivery route, and how their summers compare.
| Town | From Ahmedabad | Hottest month | Humid months | Suits |
|---|---|---|---|---|
| NVPH materials in Adalaj | ~20 km | May, 44°C | 2 | NVPH + fan & pad |
| NVPH materials in Gandhinagar | ~30 km | May, 44°C | 2 | NVPH + fan & pad |
| NVPH materials in Sanand | ~30 km | May, 44°C | 2 | NVPH + fan & pad |
| NVPH materials in Mahemdabad | ~40 km | May, 44°C | 2 | NVPH + fan & pad |
| NVPH materials in Kadi | ~50 km | May, 43°C | 2 | NVPH + fan & pad |
| NVPH materials in Kapadvanj | ~60 km | May, 43°C | 3 | NVPH + fan & pad |
