How it worksBuy individual items

NVPH materials · Kheda district, Gujarat

Naturally Ventilated Polyhouse Materials Seller in Mahemdabad

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Mahemdabad, Kheda district, the frame and film are only half the decision; the other half is how the house breathes in May and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Mahemdabad.

Hottest month
May, ~44°C
Humid (75%+)
2 months
NVPH material, 1 acre
₹734/m²
Delivery
~3 days
Naturally ventilated polyhouse built with our material, like those we supply to Mahemdabad
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Mahemdabad?

In May the air is dry enough (36% humidity) for an NVPH to vent well, but afternoons of 44°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureMahemdabadGujarat average (74 towns)What it means for the NVPH
Hottest-month high44°C (May)40.5°C3.5°C hotter than the state average
Humidity in that month36%45%Dry air vents easily
Rain a year770 mm894 mm124 mm less than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Mahemdabad
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Mahemdabad

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Mahemdabad; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor MahemdabadWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 7.4 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 44°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepJuly brings ~267 mm; clean before June
Entry cabinOptionalOptionalA double door keeps whitefly and thrips out when people walk in

Local market prices for polyhouse crops near Mahemdabad

Prices at the mandis in Kheda district follow a clear yearly pattern. Tomato is the extreme case, from ₹684 per quintal in March up to ₹2,767 in December (305% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.

CropMarketsAverageHighest monthLowest monthSwing
Tomato8₹1,839/qDec · ₹2,767Mar · ₹684305%
Brinjal6₹1,500/qNov · ₹2,581Mar · ₹748245%
Bottle gourd6₹1,179/qNov · ₹1,650Mar · ₹85693%
Cauliflower6₹1,834/qJul · ₹2,428Mar · ₹1,143112%
Okra (bhindi)7₹2,280/qDec · ₹3,536May · ₹1,589123%
Coriander (leaves)6₹1,663/qNov · ₹2,414Feb · ₹1,141112%
Cabbage6₹1,194/qNov · ₹1,850Mar · ₹639190%
Bitter gourd4₹1,612/qDec · ₹2,170Sep · ₹1,11994%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Kheda district. ₹ per quintal (100 kg).

A planting calendar built on local prices

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in December; at about 75 days to first harvest, transplant in September.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoNov, Dec~75SeptemberMar
BrinjalNov, Dec~60SeptemberMar
Bottle gourdSep, Nov~55SeptemberMar
CauliflowerJul, Aug, Nov~75AprilMar
Okra (bhindi)Jan, Dec~45OctoberMay
Coriander (leaves)Nov~35SeptemberFeb
CabbageNov~75AugustMar
Bitter gourdAug, Dec~55OctoberSep
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Twelve months of weather in Mahemdabad

May is the hottest month, with afternoons around 43.5°C; January nights drop to about 11.1°C. July is the wettest (267 mm of 770 mm a year), and humidity stays at 75% or more for 2 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan28.8°C11.1°C31%1 mm4.62
Feb32.6°C14°C26%1 mm5.52
Mar37.4°C18.8°C24%5 mm6.52.1
Apr41.7°C23.4°C27%3 mm7.22.4
May43.5°C26.7°C36%4 mm7.43.5
Jun39.2°C28°C54%96 mm63.9
Jul33.8°C25.8°C74%267 mm4.33.6
Aug31.6°C24.5°C83%256 mm4.32.8
Sep32.3°C23.7°C79%122 mm51.9
Oct33.8°C20.6°C60%10 mm5.41.3
Nov32.1°C16.4°C46%4 mm4.61.6
Dec29.3°C12.4°C38%1 mm4.31.8
NASA POWER long-term monthly averages for Mahemdabad (22.82, 72.76).

NVPH material list: 28 × 36 m in Mahemdabad

A 28 m wide, 36 m long naturally ventilated polyhouse (1,008 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSmall Column (76X2.0X4500)36 nos609 kg
GI structureSide Hockey (60X2.0X5500)32 nos549 kg
GI structureBig Bottom (60X2.0X8000)21 nos524 kg
GI structureBig Arc (42X2.0X5200)27 nos292 kg
GI structureGI Gutter Sheet70 mtr—
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)255 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)138 mtr—
Film & netsSide Insect Net (5.2 m)130 mtr—
Film & netsSide Skirting Apron (1.5 m)130 mtr—
Film & netsWhite Shade Net 50%192 mtr—
Fittings & accessoriesAluminium Profile836 mtr—
Fittings & accessoriesGI Spring1,425 mtr—
Fittings & accessoriesF Bracket54 nos—
Fittings & accessoriesClamps 60 mm Half358 nos—
Fittings & accessoriesSelf Drilling Screw1,881 nos—
The largest items of a 28 × 36 m kit (67 items in all, about 4.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Mahemdabad

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Mahemdabad and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Mahemdabad

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Mahemdabad's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~44°C highs
Strongest sun7.4 kWh/m²/day
Wettest month~267 mm
Humid (75%+)August–September
Nethouse seasonOctober–February
NASA POWER monthly averages for Mahemdabad.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 267 mm, the heaviest rain of the year.

  2. 2

    August to September

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 44°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Mahemdabad

Coloured capsicum for Mahemdabad

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 44°C.

Cucumber (parthenocarpic) for Mahemdabad

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Mahemdabad

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Mahemdabad?

Mahemdabad is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 44°C down to about 33°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~33°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in MahemdabadCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Mahemdabad

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

Mahemdabad is roughly 720 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Mahemdabad in about 3 days, carrying the invoice, the test reports and 100% invoice insurance.

Mahemdabad and the rest of Kheda district

Mahemdabad is one of the hotter towns in Gujarat (6th of 74 we cover), and in the middle for rain (43rd). We also supply 2 other towns in Kheda district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Mahemdabad's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (44°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Mahemdabad?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Do I need an entry cabin in Mahemdabad?

It is optional here, but it is cheap insurance against pests coming in with people.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Mahemdabad take?

About 720 km by road from our Satara factory, so usually in about 3 days after dispatch.

NVPH materials near Mahemdabad

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom MahemdabadHottest monthHumid monthsSuits
NVPH materials in Nadiad~20 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Ahmedabad~40 kmMay, 44°C2NVPH + fan & pad
NVPH materials in Adalaj~50 kmMay, 44°C2NVPH + fan & pad
NVPH materials in Anand~50 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Kapadvanj~50 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Petlad~50 kmMay, 43°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Mahemdabad
  2. Kryzen: Polyhouse farming in Mahemdabad
  3. NASA POWER monthly climate averages for Mahemdabad
  4. NHB cost norms for protected cultivation
Build your kit