Polyhouse material · New Delhi district, Delhi
Polyhouse material for farms in Delhi
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
For a Delhi farm, a naturally ventilated polyhouse is usually the practical first structure: its film roof protects the crop in the monsoon, while roof vents and roll-up curtains provide airflow without power. Where summer production of leafy greens is the aim, a fan and pad polyhouse can be considered because pad cooling can reduce a May afternoon of about 43°C to about 31°C inside.
- Distance from factory
- ~1,600 km by road
- Delivery after dispatch
- ~5 days
- Hottest month
- May, ~43°C
- Climate pick
- NVPH + fan & pad

Choose the structure around Delhi’s heat and rain
Delhi has a demanding summer rather than a continuously humid climate. May averages 42.8°C in the afternoon, and June is still 42.1°C. July is the wettest month, with 217 mm of rain, while annual rainfall is about 750 mm. That combination makes a covered roof valuable for keeping rain off the crop, but it also makes ventilation and summer shading important.
A naturally ventilated polyhouse (NVPH) is the usual first choice here. It uses roof vents and roll-up side curtains to move air, and the film roof gives rain protection when the monsoon arrives. It suits protected vegetables such as cucumber and capsicum, as well as flowers, where the farmer wants a controlled covered space without relying on powered cooling.
A fan and pad polyhouse is a good fit when the crop needs cooler conditions through peak summer. Exhaust fans pull air through wet pads; in May, this can bring a 43°C afternoon down to about 31°C inside. That is relevant for lettuce and other leafy greens. Square and curved nethouses are also options for nursery work or crops that need shade and air movement rather than a film-covered roof.
- Select NVPH for rain cover with natural ventilation.
- Consider fan and pad cooling for summer leafy-green production.
- Use a square nethouse for vegetable seedlings; consider a curved nethouse where an arched, shaded structure suits the crop.

Naturally ventilated polyhouse
Best fitFilm roof keeps monsoon rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Delhi.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 43°C afternoon down to about 31°C inside, cool enough for leafy greens.

Square nethouse
Good fitFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Low rain here keeps it useful most of the year.

Curved nethouse
Good fitArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
The months that change the design
The hottest and sunniest period is April to June. May has 6.7 kWh/m²/day of sunshine, alongside a 42.8°C average high and 23% humidity. July to September brings the heavier rain: 217 mm in July, 203 mm in August and 121 mm in September. August humidity averages 75%, the year’s highest monthly figure in the data.
Winter also deserves attention when planning ventilation. January nights average 5.9°C, and December nights average 7.7°C. Side curtains should therefore be usable, not merely fitted as a fixed opening: they can be closed on cold or dusty days and opened when crop conditions require air movement. The month-by-month table below helps match crop timing and operational decisions to local conditions rather than using one setting throughout the year.
- Plan peak-heat protection for April, May and June.
- Ensure rain is collected and moved away during the July–September period.
- Keep side-curtain operation available for cool winter nights.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 21.4°C | 5.9°C | 44% | 16 mm | 3.1 | 1.7 |
| Feb | 25.7°C | 9.1°C | 41% | 22 mm | 4.3 | 1.9 |
| Mar | 32.4°C | 14.9°C | 33% | 18 mm | 5.6 | 2 |
| Apr | 39°C | 21.8°C | 24% | 15 mm | 6.6 | 2.2 |
| May | 42.8°C | 27.3°C | 23% | 33 mm | 6.7 | 2.4 |
| Jun | 42.1°C | 29.7°C | 36% | 80 mm | 6.1 | 2.5 |
| Jul | 36.7°C | 27.8°C | 63% | 217 mm | 5 | 2.1 |
| Aug | 33.7°C | 25.9°C | 75% | 203 mm | 4.9 | 1.8 |
| Sep | 33.4°C | 23.2°C | 69% | 121 mm | 5.1 | 1.7 |
| Oct | 32.2°C | 18.2°C | 51% | 13 mm | 4.7 | 1.4 |
| Nov | 27.6°C | 12.6°C | 43% | 4 mm | 3.6 | 1.6 |
| Dec | 22.8°C | 7.7°C | 42% | 8 mm | 3 | 1.7 |
Material specification for a Delhi polyhouse kit
Polyhouse Constructions supplies complete material kits, not an undefined bundle of pipes. Depending on the selected structure, a kit includes the GI structure, polyfilm, nets and fittings. Individual items are also available when a farmer needs to replace or add a component to an existing setup.
For Delhi’s strong May sun, the roof-film choice matters. Our polyfilm is 250-micron white diffused and UV stabilised. Diffused film spreads incoming light and helps reduce leaf scorch under the 6.7 kWh/m²/day May sun level. Aluminium reflective shade net is the appropriate shading option for the high-heat period because it reflects heat outward instead of holding it inside.
The kit can include roll-up side curtains and side insect net for ventilation. GI gutter sheets with funnels are supplied for rain handling; with about 750 mm annual rainfall, standard gutters are suitable. The material-match table below sets out the climate reason for each of these components.
- 250-micron white diffused, UV-stabilised polyfilm for the roof.
- Aluminium reflective shade net for the hottest, brightest period.
- GI gutter sheet with funnels, roll-up curtains and side insect net as required by the design.
| Part | What we supply | Why in Delhi |
|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Sunlight peaks in May at about 6.7 kWh per m² a day; diffused film spreads it and cuts leaf scorch. |
| Shading | Aluminium (reflective) shade net | 43°C highs and strong sun: a reflective net sends heat back out instead of holding it inside. |
| Gutters | GI gutter sheet with funnels | About 750 mm of rain a year, so standard gutters are enough. |
| Ventilation | Roll-up side curtains, side insect net | Air stays fairly dry most of the year; close curtains on cold or dusty days. |
Crops to consider before buying the kit
Crop choice should decide the structure and material configuration, not follow it. Parthenocarpic cucumber is a fast 3–4 month crop and can be grown in an NVPH with drip irrigation through dry spells. Coloured capsicum is another protected-cultivation option, with shade-net use relevant through May’s high temperatures.
For production that must continue across the peak summer, fan and pad cooling is more relevant to lettuce and leafy greens because it can lower the inside May-afternoon temperature to about 31°C. A square nethouse suits vegetable seedling raising for local farmers throughout the year. Gerbera and rose are also listed options for an NVPH, serving cut-flower demand from city florists and events.
Before ordering, decide whether the priority is fruiting vegetables, leafy greens, flowers or nursery plants. That choice affects whether the kit needs a film roof, reflective shade, insect net, or fan-and-pad equipment.
- Cucumber: NVPH and drip irrigation for dry spells.
- Coloured capsicum: protected production with summer shade-net attention.
- Lettuce and leafy greens: fan and pad polyhouse for summer cooling.
- Vegetable seedlings: square nethouse.

Coloured capsicum
NVPHGrow under shade net through May, when highs reach 43°C.

Cucumber (parthenocarpic)
NVPHFast 3–4 month crop; drip irrigation keeps it going in dry spells.

Lettuce and leafy greens
Fan & pad polyhousePads bring May afternoons down to about 31°C, so greens can grow through summer.

Gerbera and rose
NVPHCut flowers with year-round demand from city florists and events.

Vegetable seedlings
Square nethouseRaise healthy nursery seedlings for local farmers all year.
Use Delhi mandi seasons when selecting crops
Delhi district market data covers outlets including APMC Azadpur, APMC Keshopur and Fruit and Vegetable Market, Gazipur APMC, along with the Gazipur flower market. Prices fluctuate and are not a promise of future returns, but the two-year market pattern is useful when comparing crops and planning harvest windows.
Capsicum has an average modal price of ₹3,324/q across 9 markets, with the highest recorded month in the data being July at ₹5,397/q and the lowest May at ₹1,621/q. Tomato averaged ₹2,073/q across 10 markets and was highest in November at ₹3,137/q, versus ₹1,027/q in May. Cucumber averaged ₹2,098/q, highest in January at ₹2,616/q and lowest in May at ₹1,348/q.
The same seasonal contrast appears elsewhere: cauliflower was highest in July at ₹5,027/q; bitter gourd in February at ₹4,533/q; coriander leaves in July at ₹7,522/q; and bhindi in December at ₹6,192/q. Check current arrivals, quality requirements and daily market prices before planting. The table below gives the complete district-market comparison.
- Capsicum: July is the highest recorded month in the data; May is the lowest.
- Tomato: November is the highest recorded month; May is the lowest.
- Cucumber: January is the highest recorded month; May is the lowest.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Cucumber | 10 | ₹2,098/q | Jan (₹2,616) | May (₹1,348) |
| Brinjal | 10 | ₹1,912/q | Jul (₹2,266) | May (₹1,609) |
| Cabbage | 10 | ₹1,175/q | Nov (₹1,765) | May (₹680) |
| Tomato | 10 | ₹2,073/q | Nov (₹3,137) | May (₹1,027) |
| Cauliflower | 10 | ₹2,654/q | Jul (₹5,027) | Feb (₹854) |
| Capsicum | 9 | ₹3,324/q | Jul (₹5,397) | May (₹1,621) |
| Bottle gourd | 10 | ₹1,765/q | Dec (₹2,276) | May (₹1,141) |
| Bitter gourd | 9 | ₹2,921/q | Feb (₹4,533) | May (₹1,529) |
| Coriander (leaves) | 10 | ₹3,535/q | Jul (₹7,522) | Feb (₹1,328) |
| Okra (bhindi) | 9 | ₹3,574/q | Dec (₹6,192) | May (₹1,839) |
Why factory-made material is different from site-cut supply
Polyhouse Constructions is a manufacturer of protected-cultivation structures and material, and a venture of Kryzen Biotech Pvt Ltd. Manufacturing is in-house at Degaon on the Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra. We do not have an office in Delhi; material is supplied from the factory, while construction or erection is handled by Kryzen Biotech’s construction team.
For a farm structure, the comparison should go beyond a pipe rate. Our GI pipes use ISI-marked branded steel from Tata, Jindal and JSW, and parts are cut and drilled to the drawing. Every dispatch has a lab test certificate, and every product has a technical data sheet. A 32-point QA checklist is used for every part.
The GI structure carries a 15-year manufacturing warranty, polyfilm a 2.5-year warranty and nets a 3-year warranty. The comparison below explains the practical difference between a designed kit with counted materials and a typical local fabricator arrangement, where a standard design, on-site cutting or material shortfall can be a risk.
- In-house engineering and manufacturing for the selected design.
- Lab test certificate with every dispatch and technical data sheet for every product.
- 15-year GI structure, 2.5-year polyfilm and 3-year net warranties.
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | 30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | 15-year manufacturing warranty | Rarely a written warranty |
| Engineering | In-house engineering team | No design or load checks |
| Manufacturing | In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | 32-point QA checklist for every part | Visual check at best |
| Lab certificate | Lab test certificate with every dispatch | Not provided |
| Technical sheet | Technical data sheet for every product | Not available |
| Material match | Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | Backed by industry leader Kryzen Biotech | Single-owner workshop |
Delivery to Delhi and how to place an order
Delhi is 1,600 km from our Satara factory. Delivery is estimated at 5 days after dispatch. This is material supply from the factory, not supply from a Delhi office. If you want erection, it is done by Kryzen Biotech’s construction team.
Start at polyhouseconstructions.com and build the kit online. Select the structure and required items, then review every item, its quantity and that week’s rate before booking. Rates follow weekly GI and plastic rates and are updated every Friday, so the displayed rate should be checked when you are ready to confirm the order.
Booking requires a 5% advance and the remaining 95% before dispatch. A 5% bulk discount applies on 10+ units of an item. Share the intended crop and structure requirement before finalising the kit so the roof film, shade net, side insect net, gutters and ventilation components can be matched to the design.
- Build and review the complete kit online before booking.
- Expect delivery to Delhi in 5 days after dispatch.
- Pay 5% to book and 95% before dispatch.
Subsidy: verify approval before construction starts
For protected cultivation, MIDH/NHM provides 50% of the cost norm up to 4,000 m² per beneficiary. The stated norms include ₹844/m² for tubular NVPH, ₹1,400/m² for fan and pad, and ₹710/m² for shade-net house. These are cost norms, not a final quote or a guaranteed amount to an individual applicant.
For commercial projects above 2,500 m², NHB guidelines provide a credit-linked back-ended subsidy of 50% of project cost at admissible norms, capped at ₹56 lakh per project. In-Principle Approval from NHB is required before starting. Norms can change, so confirm the current eligibility, process and norms with the state horticulture department before paying for construction or beginning work.
The seasonal calendar below is also useful while discussing the project design: it marks May as the peak-heat and strongest-sun month, and July as the wettest month. Build the crop and material plan around those local stress periods.
- MIDH/NHM: 50% of cost norm, up to 4,000 m² per beneficiary.
- NHB commercial route: projects above 2,500 m² require In-Principle Approval before starting.
- Confirm current norms and eligibility with the state horticulture department.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~43°C highs | ||||||||||||
| Strongest sun | 6.7 kWh/m²/day | ||||||||||||
| Wettest month | ~217 mm |
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Which polyhouse is best for Delhi?
A naturally ventilated polyhouse is usually the first choice because it combines a rain-protecting film roof with roof vents and roll-up curtains. For leafy greens through Delhi’s May heat, a fan and pad polyhouse is a good option because it can reduce a roughly 43°C afternoon to about 31°C inside.
What material will be included in my Delhi polyhouse kit?
A complete kit can include the GI structure, polyfilm, nets and fittings. For Delhi conditions, relevant components include 250-micron white diffused UV-stabilised polyfilm, aluminium reflective shade net, side insect net, roll-up curtains and GI gutter sheets with funnels.
How long will material delivery to Delhi take?
Delhi is 1,600 km from the Satara factory, and delivery is estimated at 5 days after dispatch. Polyhouse Constructions supplies the material from its factory; construction and erection are done by Kryzen Biotech’s construction team.
Which crops have useful Delhi mandi price seasons?
The district data shows capsicum highest in July at ₹5,397/q, tomato highest in November at ₹3,137/q and cucumber highest in January at ₹2,616/q. These are historical market observations across listed Delhi markets, so check current arrivals and daily prices before planting.
Can I get a subsidy for a polyhouse in Delhi?
MIDH/NHM states 50% of the cost norm up to 4,000 m² per beneficiary. For NHB commercial projects above 2,500 m², In-Principle Approval is needed before starting; confirm current norms and eligibility with the state horticulture department.
Polyhouse material near Delhi
Supplying a farm outside Delhi? These nearby towns, with their own weather, are on the same delivery route.
| Town | From Delhi | Hottest month | Rain a year | Suits |
|---|---|---|---|---|
| Polyhouse material in Bhalswa Jahangir Pur | ~10 km | May, 43°C | 648 mm | NVPH + fan & pad |
| Polyhouse material in Karawal Nagar | ~10 km | May, 43°C | 750 mm | NVPH + fan & pad |
| Polyhouse material in New Delhi | ~10 km | May, 43°C | 750 mm | NVPH + fan & pad |
| Polyhouse material in Nangloi Jat | ~20 km | May, 43°C | 648 mm | NVPH + fan & pad |
| Polyhouse material in Sultan Pur Majra | ~20 km | May, 43°C | 648 mm | NVPH + fan & pad |
| Polyhouse material in Loni | ~20 km | May, 43°C | 833 mm | NVPH + fan & pad |
