Equipment · Coimbatore district, Tamil Nadu
Protected cultivation equipment for Coimbatore farms
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
For Coimbatore, protected-cultivation equipment has to manage a hot, bright March as well as eight humid months from May to December. Polyhouse Constructions supplies complete material kits and individual equipment from its Satara factory; construction, where required, is carried out by Kryzen Biotech’s construction team.
- Pad cooling
- Works: ~29°C inside
- Humid months
- 8
- Shading need
- Medium
- Delivery
- ~4 days

Start with the equipment Coimbatore’s climate actually needs
A naturally ventilated polyhouse (NVPH) with side ventilation is a practical base system where crop protection and rain cover are the priority. However, Coimbatore’s strongest sun arrives in March, when the average afternoon high is 35°C and sunshine reaches 6.4 kWh/m²/day. White 50% shade net is therefore a relevant shading choice, rather than an afterthought added after planting.
From May through December, relative humidity is 76% to 85%. In this long humid spell, air circulation fans, working roll-up curtains and undamaged side insect net matter because stagnant air can increase the disease and pest-management burden. Rain protection must also be part of the original material list: annual rainfall is 1,142 mm, with October averaging 192 mm.
January can reach a 16°C average night low and December 16.7°C, but the climate equipment priority is not extra night heating. The priority table below sets out the recommended direction for cooling, air movement, shade, rain and nights.
- For March heat: exhaust fans and cellulose pads where a controlled fan-and-pad house is justified.
- For May–December humidity: air circulation fans and serviceable ventilation components.
- For March sun: white 50% shade net.
- For rain: standard gutters in covered houses.
- For the coolest nights: no additional equipment need is identified for this climate.
| Need | For Coimbatore | Why |
|---|---|---|
| Cooling | Exhaust fans + cellulose pads | Pads bring 35°C to ~29°C in March |
| Air movement | Air circulation fans | Humid from May to December |
| Shading | White 50% net | Sun peaks at 6.4 kWh/m² in March |
| Rain | Standard gutters | 1,142 mm a year |
| Nights | No extra need | — |
The monthly pattern to plan around
Do not select equipment only on the annual rainfall figure. February and March are comparatively dry and sunny: February averages 32.7°C in the afternoon with 56% humidity, followed by March at 35°C with 53% humidity. April is still hot at 34.5°C, before the wetter, more humid period begins in May.
June and July bring the highest average winds, 3.3 m/s, while humidity is 83% and 85% respectively. Rain remains substantial through November, including 162 mm in June, 157 mm in July, 136 mm in August, 126 mm in September and 192 mm in October. Check covers, gutters, curtain movement and netting before this run of weather rather than during it.
The month-by-month table below is useful when timing crop cycles, cooling maintenance and monsoon checks.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 29.5°C | 16°C | 67% | 6 mm | 5.5 | 1.8 |
| Feb | 32.7°C | 17.5°C | 56% | 9 mm | 6.2 | 1.8 |
| Mar | 35°C | 20.3°C | 53% | 30 mm | 6.4 | 1.6 |
| Apr | 34.5°C | 22.2°C | 63% | 60 mm | 6.1 | 1.5 |
| May | 31.1°C | 22°C | 76% | 118 mm | 5.6 | 2.2 |
| Jun | 28°C | 21°C | 83% | 162 mm | 4.5 | 3.3 |
| Jul | 27.1°C | 20.5°C | 85% | 157 mm | 4.1 | 3.3 |
| Aug | 27.2°C | 20.2°C | 85% | 136 mm | 4.4 | 3 |
| Sep | 27.8°C | 20.1°C | 85% | 126 mm | 5 | 2.4 |
| Oct | 27.7°C | 20°C | 85% | 192 mm | 4.7 | 1.6 |
| Nov | 26.9°C | 18.7°C | 84% | 118 mm | 4.6 | 1.5 |
| Dec | 27.3°C | 16.7°C | 79% | 28 mm | 4.9 | 1.8 |
Will fan-and-pad cooling pay on a Coimbatore farm?
Technically, fan-and-pad cooling works in Coimbatore. The reference condition is March: pads can bring a 35°C outside temperature to about 29°C inside. That is a meaningful temperature reduction during the town’s hottest and sunniest month, so it is worth considering for crops that need more controlled summer conditions.
Whether it pays financially cannot be decided from temperature alone. Compare the crop, planting window, expected grade or harvest timing, water and electricity use, labour, and the full installed system cost. The material figure below is for one specified 52 × 76 m fan-and-pad house, not a return estimate and not a quote for every farm.
The example needs 12 exhaust fans and 82 cellulose pads for 3,952 m². Its material figure including GST is ₹32,48,775. Use it to understand the scale of a fan-and-pad system, then build the exact kit for the selected dimensions and crop.
- Fan-and-pad cooling is most relevant for managing the March heat peak.
- For an NVPH, air circulation fans remain an optional upgrade and can assist during the humid months.
- Get the crop and market plan clear before choosing a higher-control cooling system.
- Fan & pad house, 52 × 76 m
- 3,952 m²
- Exhaust fans
- 12 nos
- Cellulose pads
- 82 nos
- Material incl. GST
- ₹32,48,775
Cooling and ventilation items with current listed rates
Individual cooling items are available as well as complete kits. The listed rate for an exhaust fan is ₹22,700 per piece + GST. A 600X150X1800 cellulose pad is ₹2,616 per piece + GST, and a 150 mm aluminium pad frame is ₹815 per metre + GST. An air circulation fan is ₹8,999 per piece + GST.
For an NVPH, natural ventilation hardware is equally important. A manual gear roll-up curtain unit is ₹1,050 per piece + GST, a 27X2.0X6000 curtain pipe is ₹758 per piece + GST, a 5.2 m side insect net is ₹221 per metre + GST, and a 0.75-inch circular curtain clamp is ₹11 per piece + GST.
These are item rates, not a whole-house price. Material prices follow weekly GI and plastic rates, updated every Friday, so review the current online kit before booking. A 5% bulk discount applies on 10 or more units of an item.
- Fan and cellulose pads are standard equipment for a fan-and-pad house.
- Roll-up curtain units and side insect net are used in an NVPH.
- Air circulation fans are optional upgrades for both NVPH and fan-and-pad houses.
Covering, shade and rain-control material
For covered systems, the available polyfilm is 250-micron white diffused, UV-stabilised polyfilm. The 4.5 m product is listed at ₹254 per metre + GST. White 50% shade net, suited to the March light load identified for Coimbatore, is ₹27 per metre + GST. The 4 m aluminium shade net is an optional reflective upgrade at ₹315 per metre + GST.
The rain side of the specification deserves the same attention. A GI gutter sheet is ₹335 per metre + GST, a gutter funnel is ₹1,350 per piece + GST, and a 1.5 m side skirting apron is ₹64 per metre + GST. GI gutters are used in NVPH and fan-and-pad houses; the side skirting apron is also used in square and curved nethouses.
A square or curved nethouse can use shade net, but it does not use polyfilm or GI gutter sheets in the standard system listing. Choose the structure after deciding whether rain exclusion, insect exclusion, shading, or temperature control is the main crop requirement.
- White 50% shade net is used in NVPH, fan-and-pad, square nethouse and curved nethouse systems.
- Polyfilm is used in NVPH and fan-and-pad houses.
- Build the material list by system so parts are not assumed to be interchangeable.
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Match crop timing with the local market, not equipment alone
Equipment should support a crop and harvest plan that can be checked against Coimbatore district market patterns. The district has markets including Pollachi(Uzhavar Sandhai ), Sundarapuram(Uzhavar Sandhai ), Singanallur(Uzhavar Sandhai ), Mettupalayam(Uzhavar Sandhai ), Vadavalli(Uzhavar Sandhai ), Kurichi(Uzhavar Sandhai ), RSPuram(Uzhavar Sandhai ), Sulur(Uzhavar Sandhai ) and Udumalpet APMC.
Over the last two years of reported daily prices, beans had an average modal price of ₹5,808/q across 18 markets and peaked in May at ₹6,768. Green chilli averaged ₹4,817/q and peaked in June at ₹5,634. Coriander leaves reached their highest reported month in October at ₹7,790/q, while cauliflower peaked in November at ₹5,394/q. These are market observations, not future price promises.
This information is particularly useful for the fan-and-pad decision: a controlled environment should be assessed against a realistic harvest window and market route, not merely the ability to lower March temperature.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Beans | 18 | ₹5,808/q | May (₹6,768) | Feb (₹4,446) |
| Green chilli | 18 | ₹4,817/q | Jun (₹5,634) | Apr (₹3,709) |
| Okra (bhindi) | 18 | ₹4,543/q | Dec (₹5,513) | Jun (₹3,836) |
| Bottle gourd | 18 | ₹2,577/q | Dec (₹3,490) | Mar (₹1,956) |
| Coriander (leaves) | 18 | ₹5,244/q | Oct (₹7,790) | Jan (₹3,084) |
| Snake gourd | 18 | ₹3,430/q | Oct (₹3,851) | Mar (₹2,884) |
| Ridge gourd | 18 | ₹4,772/q | Dec (₹5,464) | Mar (₹4,122) |
| Papaya | 18 | ₹3,305/q | Sep (₹3,943) | Jun (₹2,702) |
| Cabbage | 16 | ₹2,628/q | Jul (₹3,184) | Apr (₹1,951) |
| Cauliflower | 16 | ₹4,162/q | Nov (₹5,394) | Mar (₹3,101) |
A maintenance calendar for this town
Before March, prepare the cooling equipment rather than waiting for the 35°C peak. Wash or replace cellulose pads, clean the pad gutter and filter, and check each exhaust-fan belt and shutter. Also inspect shade material before March’s 6.4 kWh/m²/day sun level.
From May to December, run air circulation fans in the mornings, grease curtain gear units and inspect insect net for tears. This is the period of sustained humidity, starting at 76% in May and reaching 85% from July to October, so neglected ventilation and torn netting can undermine the protected environment.
During December to February, tighten clamps and bolts, check GI springs in aluminium profiles, and plan film or net replacements ahead of the next hot season. This is also a suitable time to list small parts needed for repair rather than stopping work during the crop cycle.
- 1
Before March
Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 35°C peak.
- 2
May to December
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 3
December to February
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Quality checks, warranty and ordering from Satara
Polyhouse Constructions is a manufacturer and a venture of Kryzen Biotech Pvt Ltd, supplying material from Degaon, Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra. There is no Coimbatore office. The factory-to-Coimbatore distance is 1,090 km, and delivery is listed as 4 days after dispatch.
Material kits can include the GI structure, polyfilm, nets and fittings for NVPH, fan-and-pad polyhouses, square nethouses and curved nethouses. GI pipes are ISI-marked branded steel from Tata, Jindal and JSW. Every part is manufactured in-house, cut and drilled to the drawing, checked through a 32-point QA process, and dispatched with a lab test certificate and technical data sheet.
Third-party checks cover GI pipe steel tensile strength, corrosion resistance through a salt spray test, and steel composition through chemical analysis. This is relevant for Coimbatore’s long humid period. The warranty is 15 years on the GI structure, 2.5 years on polyfilm and 3 years on shade and insect nets.
For a complete kit, build the requirement online to see each item, quantity and the week’s rate. Booking is with 5% advance and 95% before dispatch. Kryzen Biotech’s construction team handles erection where construction is required.
- GI structure warranty: 15 years.
- Polyfilm warranty: 2.5 years.
- Shade and insect nets warranty: 3 years.
- Individual fans, pads, nets and fittings can be purchased for repairs or extensions.

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Coimbatore.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Spares for repairs and extensions
A damaged curtain clamp, worn fan component, torn side insect net or replacement pad should not require ordering an entire new kit. Every fan, pad, net and fitting is sold individually at the weekly rate, making this route suitable for repairs and expansions.
Keep the original technical sheet and record the exact component dimensions when ordering. This is especially important for items such as 4.5 m polyfilm, 5.2 m side insect net, 150 mm pad frames and the specified 600X150X1800 cellulose pads. It helps match the replacement to the existing system.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Does Coimbatore need fan-and-pad cooling or just a naturally ventilated polyhouse?
Fan-and-pad cooling works here: in March, it can reduce a 35°C outside temperature to about 29°C inside. An NVPH may suit farms focused on rain cover, insect exclusion and natural ventilation, but the financial choice depends on crop, crop timing, operating costs and the full system cost.
What shade net is appropriate for Coimbatore’s March sun?
White 50% shade net is the stated priority because March sunshine averages 6.4 kWh/m²/day. It is used with NVPH, fan-and-pad, square nethouse and curved nethouse systems and is listed at ₹27 per metre + GST.
How should I prepare the polyhouse for Coimbatore’s humid months?
From May to December, run air circulation fans in the mornings, grease curtain gear units and inspect insect net for tears. Humidity starts at 76% in May and is 85% from July to October, so airflow and intact netting need regular attention.
Are gutters necessary for a covered house in Coimbatore?
Yes, standard gutters are the climate priority for the town’s 1,142 mm annual rainfall. October alone averages 192 mm, and GI gutter sheets are used in NVPH and fan-and-pad houses.
Can I order a replacement fan, pad, net or fitting without buying a complete kit?
Yes. Individual fans, pads, nets and fittings are sold separately at the weekly rate for repairs and extensions. Keep the existing part’s dimensions and technical details to ensure the replacement matches your structure.
Equipment supply near Coimbatore
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Coimbatore | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Chittur-Thathamangalam | ~50 km | Limited | 8 | Mar, 37°C |
| Equipment supplier in Palladam | ~50 km | Works (~31°C) | 3 | Apr, 38°C |
| Equipment supplier in Pollachi | ~50 km | Limited | 8 | Mar, 36°C |
| Equipment supplier in Palakkad | ~60 km | Works (~32°C) | 8 | Mar, 38°C |
| Equipment supplier in Tiruppur | ~60 km | Works (~31°C) | 3 | Apr, 38°C |
| Equipment supplier in Udhagamandalam | ~70 km | Limited | 7 | Mar, 24°C |



