Polyhouse material · Coimbatore district, Tamil Nadu
Polyhouse material for Coimbatore farms
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
For most Coimbatore vegetable and flower farms, a naturally ventilated polyhouse is the practical first structure: it keeps the long May–December wet period off the crop while roof vents and roll-up sides provide passive air movement. Polyhouse Constructions manufactures complete material kits at its Satara factory, while construction, if required, is handled by Kryzen Biotech’s team.
- Distance from factory
- ~1,090 km by road
- Delivery after dispatch
- ~4 days
- Hottest month
- March, ~35°C
- Climate pick
- NVPH + fan & pad

Start with a structure that handles humidity and rain
Coimbatore is not hot throughout the year, but it has a demanding wet and humid period. The highest average afternoon temperature is 35°C in March, with the strongest sun at 6.4 kWh/m²/day. From May through December, humidity is 75% or more; October alone averages 192 mm of rain. Annual rainfall is about 1,142 mm.
That pattern makes a naturally ventilated polyhouse (NVPH) the usual first choice. Its film roof prevents rain from falling directly on the crop, while roof ventilation and roll-up side curtains help exchange humid air without relying on powered cooling. This is more useful here than treating a structure simply as shade protection.
A fan & pad polyhouse is a sound option where the crop needs more controlled summer conditions, particularly leafy greens. In March, wet pads and exhaust fans can bring a 35°C afternoon to about 29°C inside. A square or curved nethouse is better kept to the drier December–February period, because rain passes through its net covering.
- Choose NVPH for protected vegetable, flower and long-duration crop production through the wet months.
- Choose fan & pad where active cooling is needed for summer leafy greens.
- Use a nethouse mainly from December to February, not as a rain-proof structure.

Naturally ventilated polyhouse
Best fitFilm roof keeps May–December rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Coimbatore.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In March that can take a 35°C afternoon down to about 29°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from December to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Rain passes through, so pick crops that tolerate it.
Read the climate before finalising the cover and ventilation
The roof cover, side protection and drainage should be selected as one system. March calls for light management, while May–December needs special attention to humidity, wet foliage and air circulation. June and July have average afternoon highs of 28°C and 27.1°C, but humidity is 83% and 85% respectively; a lower temperature does not remove the need for ventilation.
The month-by-month table below is useful when discussing crop timing, side-opening practice and drainage with the erection team. It also shows why a nethouse is seasonal here: January and February have only 6 mm and 9 mm of average rain, whereas rainfall becomes much heavier later in the year.
- March: 35°C average high and 6.4 kWh/m²/day sun.
- May–December: the humid period, with 75% or higher humidity.
- October: the wettest listed period at 192 mm average rain.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 29.5°C | 16°C | 67% | 6 mm | 5.5 | 1.8 |
| Feb | 32.7°C | 17.5°C | 56% | 9 mm | 6.2 | 1.8 |
| Mar | 35°C | 20.3°C | 53% | 30 mm | 6.4 | 1.6 |
| Apr | 34.5°C | 22.2°C | 63% | 60 mm | 6.1 | 1.5 |
| May | 31.1°C | 22°C | 76% | 118 mm | 5.6 | 2.2 |
| Jun | 28°C | 21°C | 83% | 162 mm | 4.5 | 3.3 |
| Jul | 27.1°C | 20.5°C | 85% | 157 mm | 4.1 | 3.3 |
| Aug | 27.2°C | 20.2°C | 85% | 136 mm | 4.4 | 3 |
| Sep | 27.8°C | 20.1°C | 85% | 126 mm | 5 | 2.4 |
| Oct | 27.7°C | 20°C | 85% | 192 mm | 4.7 | 1.6 |
| Nov | 26.9°C | 18.7°C | 84% | 118 mm | 4.6 | 1.5 |
| Dec | 27.3°C | 16.7°C | 79% | 28 mm | 4.9 | 1.8 |
What a Coimbatore-ready material kit should contain
A complete kit from Polyhouse Constructions is not only GI pipes. It can include the GI structure, 250-micron white diffused UV-stabilised polyfilm, shade net, side insect net, fittings and the parts specified for the chosen design. We also supply individual items when a farmer is replacing or adding a component.
For this climate, white diffused roof film helps spread the strong March sunlight rather than concentrating it on foliage. White 50% shade net is useful during that high-sun period. GI gutter sheets with funnels are important for taking roof water away; gutters should be cleared before the rainy period. Roll-up side curtains with gear unit, side insect net and an entry cabin support both airflow and pest exclusion when humidity persists.
The table below matches each of these material decisions to the local climate. It is a useful checklist before comparing two quotations: ask whether the quote includes the specified curtains, gears, gutters, insect net and fittings rather than assuming they are included.
- Roof: 250-micron white diffused polyfilm.
- Sides: roll-up curtains, gear unit and insect net.
- Rain handling: GI gutter sheet and funnels.
- Shade: white 50% shade net where required.
| Part | What we supply | Why in Coimbatore |
|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Sunlight peaks in March at about 6.4 kWh per m² a day; diffused film spreads it and cuts leaf scorch. |
| Shading | White shade net 50% | Useful through March, when sunlight is at its strongest here. |
| Gutters | GI gutter sheet with funnels | About 1,142 mm of rain a year; keep gutters clear before the monsoon. |
| Ventilation | Roll-up side curtains with gear unit, side insect net, entry cabin | Humidity stays at 75% or more from May to December; open sides and a double-door cabin keep air moving and pests out. |
Crop planning should follow both protection needs and mandi season
Under an NVPH, coloured capsicum, parthenocarpic cucumber and indeterminate tomato are relevant protected-cultivation choices. Capsicum is shown as an 8–10 month cycle, cucumber as a faster 3–4 month crop, and tomato can be trained on strings for a long harvest. Gerbera and rose are additional options under naturally ventilated cover. Fan & pad cooling makes lettuce and other leafy greens more feasible through summer, while a square nethouse can be used for vegetable seedlings during December–February.
Do not select a crop only because it suits a structure. Check the intended harvest period against district market prices and your buyer. Across the Coimbatore district data, beans had an average modal price of ₹5,808/q and a high of ₹6,768 in May. Green chilli peaked in June at ₹5,634/q, while coriander leaves peaked in October at ₹7,790/q.
Several other peaks occur in the later part of the year: cauliflower in November at ₹5,394/q; okra in December at ₹5,513/q; bottle gourd in December at ₹3,490/q; and ridge gourd in December at ₹5,464/q. These are historical market observations, not a promised future price. Plan sowing and crop duration so that harvest possibility, disease risk in humidity and expected market window are considered together.
- For a May market window, review beans alongside your crop duration.
- For October, coriander leaves and snake gourd show their listed high-price month.
- For November–December, compare cauliflower, okra, bottle gourd and ridge gourd windows.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Beans | 18 | ₹5,808/q | May (₹6,768) | Feb (₹4,446) |
| Green chilli | 18 | ₹4,817/q | Jun (₹5,634) | Apr (₹3,709) |
| Okra (bhindi) | 18 | ₹4,543/q | Dec (₹5,513) | Jun (₹3,836) |
| Bottle gourd | 18 | ₹2,577/q | Dec (₹3,490) | Mar (₹1,956) |
| Coriander (leaves) | 18 | ₹5,244/q | Oct (₹7,790) | Jan (₹3,084) |
| Snake gourd | 18 | ₹3,430/q | Oct (₹3,851) | Mar (₹2,884) |
| Ridge gourd | 18 | ₹4,772/q | Dec (₹5,464) | Mar (₹4,122) |
| Papaya | 18 | ₹3,305/q | Sep (₹3,943) | Jun (₹2,702) |
| Cabbage | 16 | ₹2,628/q | Jul (₹3,184) | Apr (₹1,951) |
| Cauliflower | 16 | ₹4,162/q | Nov (₹5,394) | Mar (₹3,101) |
Where the district crop can be marketed
The price figures are drawn from 18 markets for many crops in Coimbatore district, and 16 markets for cabbage and cauliflower. Listed outlets include Pollachi (Uzhavar Sandhai), Sundarapuram (Uzhavar Sandhai), Singanallur (Uzhavar Sandhai), Mettupalayam (Uzhavar Sandhai), Vadavalli (Uzhavar Sandhai), Kurichi (Uzhavar Sandhai), RSPuram (Uzhavar Sandhai) and Sulur (Uzhavar Sandhai). Udumalpet APMC and the Sulur, Kurichi and Mettupalayam Uzhavar Sandhai APMCs are also included.
This gives a farmer more than one local reference point when deciding what to plant. Pollachi and Palladam are each 50 km from Coimbatore, while Tiruppur is 60 km away. Before committing to a crop cycle, speak to the market or buyer you expect to use about grading, volume, harvest frequency and delivery timing; the mandi table is a season guide rather than a sale arrangement.
- Beans, green chilli, okra, bottle gourd, coriander, snake gourd, ridge gourd and papaya are tracked across 18 markets.
- Cabbage and cauliflower are tracked across 16 markets.
- Use the listed average modal prices in ₹ per quintal as a comparison point, not a guaranteed rate.

Coloured capsicum
NVPHThe most common polyhouse crop: steady yields over an 8–10 month cycle.

Cucumber (parthenocarpic)
NVPHFast 3–4 month crop; drip irrigation keeps it going in dry spells.

Tomato
NVPHIndeterminate varieties trained up strings give a long harvest under cover.

Lettuce and leafy greens
Fan & pad polyhousePads bring March afternoons down to about 29°C, so greens can grow through summer.

Gerbera and rose
NVPHCut flowers with year-round demand from city florists and events.

Vegetable seedlings
Square nethouseRaise nursery seedlings from December to February for the local planting season.
Manufacturer-supplied kit versus a site-made structure
A local fabricator may be convenient for on-site work, but a protected structure needs every pipe, bend, fastener, cover and opening to match the drawing. Polyhouse Constructions is a manufacturer of protected-cultivation structures and material, a venture of Kryzen Biotech Pvt Ltd. Kits are manufactured in-house and cut and drilled to the design rather than assembled from an unspecified set of site-cut pipes.
Our GI material uses ISI-marked branded steel from Tata, Jindal and JSW. Each dispatch has a lab test certificate, and every product has a technical data sheet. The material is subject to a 32-point QA checklist. Warranty is 15 years on the GI structure, 2.5 years on polyfilm and 3 years on nets.
The comparison table below sets out what to ask of any supplier, including engineering, design checks, counted material, test documentation and written warranty. If erection is required in Coimbatore, it is done by Kryzen Biotech’s construction team—not by an office in the town.
- In-house engineering and manufacturing.
- Every kit counted per design to avoid material mismatch.
- Written material warranties and dispatch documentation.
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | 30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | 15-year manufacturing warranty | Rarely a written warranty |
| Engineering | In-house engineering team | No design or load checks |
| Manufacturing | In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | 32-point QA checklist for every part | Visual check at best |
| Lab certificate | Lab test certificate with every dispatch | Not provided |
| Technical sheet | Technical data sheet for every product | Not available |
| Material match | Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | Backed by industry leader Kryzen Biotech | Single-owner workshop |
Ordering and delivery to Coimbatore
Build the requirement online at polyhouseconstructions.com. Select the structure type—NVPH, fan & pad polyhouse, square nethouse or curved nethouse—and review every item, quantity and that week’s rate in the kit builder. This is useful when comparing a full kit with a partial purchase such as film, nets or fittings.
Prices follow weekly GI and plastic rates and are updated every Friday. There is a 5% bulk discount on 10 or more units of an item. Booking is with 5% advance, with the remaining 95% payable before dispatch.
Material comes from our factory at Degaon, Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra. Coimbatore is 1,090 km from the factory, and delivery is listed as 4 days after dispatch. Confirm the final kit, dispatch readiness and erection requirement before fixing your crop planting date.
- Review the item-wise kit before booking.
- Book with 5% advance; pay 95% before dispatch.
- Allow the stated 4 days after dispatch for delivery to Coimbatore.
Check subsidy eligibility before construction starts
For Tamil Nadu, MIDH/NHM support is stated as 50% of the cost norm for up to 4,000 m² per beneficiary. The higher norms mentioned for hilly and north-eastern states do not apply to Coimbatore. For commercial projects above 2,500 m², NHB guidelines state a credit-linked back-ended subsidy of 50% of project cost at admissible norms, capped at ₹56 lakh per project; In-Principle Approval from NHB is required before starting.
The published NHB cost norms used here are ₹844/m² for tubular NVPH, ₹1,400/m² for fan & pad, and ₹710/m² for shade net house. These norms can change, so confirm the current procedure, admissibility, documents and cost norms with the Tamil Nadu state horticulture department before placing an order or beginning civil work.
- MIDH/NHM: 50% of cost norm, up to 4,000 m² per beneficiary.
- NHB commercial route: above 2,500 m² and approval needed before starting.
- Verify current norms and process with the state horticulture department.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~35°C highs | ||||||||||||
| Strongest sun | 6.4 kWh/m²/day | ||||||||||||
| Humid (75%+) | May–December | ||||||||||||
| Nethouse season | December–February |
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Which structure is best for a Coimbatore farm?
A naturally ventilated polyhouse is the usual first choice because it keeps May–December rain off the crop and allows passive ventilation through roof vents and roll-up curtains. Fan & pad is suitable where summer cooling is needed, while nethouses are best used mainly from December to February.
What material should I ask for in a Coimbatore polyhouse?
Ask for 250-micron white diffused UV-stabilised polyfilm, roll-up side curtains with gear unit, side insect net, entry cabin, and GI gutters with funnels. The combination addresses March sun, about 1,142 mm annual rain, and humidity of 75% or more from May to December.
How long does delivery to Coimbatore take?
Coimbatore is 1,090 km from the Satara factory, with delivery listed as 4 days after dispatch. This is dispatch-to-delivery timing, so finalise the kit and dispatch readiness before scheduling planting or erection.
Can I buy only polyfilm, shade net or fittings instead of a full kit?
Yes. Polyhouse Constructions sells complete kits as well as individual items. The online kit builder lets you see item quantities and the week’s rate before you book.
Which local mandi seasons are useful when choosing a crop?
District data shows beans highest in May, green chilli in June, coriander leaves and snake gourd in October, cauliflower in November, and okra, bottle gourd and ridge gourd in December. These are historical modal-price observations from Coimbatore district markets and should not be treated as assured prices.
Polyhouse material near Coimbatore
Neighbouring towns we deliver to from the same route, and how their climate compares with Coimbatore.
| Town | From Coimbatore | Hottest month | Rain a year | Suits |
|---|---|---|---|---|
| Polyhouse material in Chittur-Thathamangalam | ~50 km | Mar, 37°C | 1,558 mm | NVPH |
| Polyhouse material in Palladam | ~50 km | Apr, 38°C | 710 mm | NVPH + fan & pad |
| Polyhouse material in Pollachi | ~50 km | Mar, 36°C | 1,558 mm | NVPH |
| Polyhouse material in Palakkad | ~60 km | Mar, 38°C | 1,142 mm | NVPH + fan & pad |
| Polyhouse material in Tiruppur | ~60 km | Apr, 38°C | 710 mm | NVPH + fan & pad |
| Polyhouse material in Udhagamandalam | ~70 km | Mar, 24°C | 945 mm | NVPH |
