Polyhouse material · Maharashtra
Polyhouse material supplier for Nagpur farms
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
For most Nagpur vegetable farms, a naturally ventilated polyhouse is the practical first structure: it protects crops through the July–October humid, rainy spell while allowing passive ventilation. A fan-and-pad polyhouse is worth considering for summer leafy greens, while a nethouse is best treated as an October–February seasonal structure rather than monsoon protection.
- Distance from factory
- ~840 km by road
- Delivery after dispatch
- ~4 days
- Hottest month
- May, ~44°C
- Climate pick
- NVPH + fan & pad

Start with the structure that fits the weather
Nagpur has two demanding periods for protected cultivation. April has the strongest sun at about 7 kWh/m²/day, May averages 44.1°C in the afternoon, and July brings about 361 mm of rain. Humidity stays high from July to October, reaching 82% in July, 87% in August and 85% in September.
A naturally ventilated polyhouse (NVPH) is the usual first choice here. Its film roof keeps rain off the crop, while roof vents and roll-up curtains move air without power. For a farm targeting leafy greens through the hottest period, a fan-and-pad polyhouse is a better fit: in May, pad cooling can bring a 44°C afternoon to about 32°C inside. Square and curved nethouses can work well from October to February, when rainfall is low, but are seasonal choices for Nagpur.
- Choose NVPH for a broadly useful rain-protected vegetable structure.
- Choose fan and pad when summer cooling for leafy crops is the main requirement.
- Use a nethouse for nursery work or seasonal production from October to February.

Naturally ventilated polyhouse
Best fitFilm roof keeps July–October rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Nagpur.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 44°C afternoon down to about 32°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from October to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in April.
Material specification should respond to heat, rain and humidity
A Nagpur kit should not be a generic frame-and-cover list. Polyhouse Constructions supplies a 250-micron white diffused, UV-stabilised polyfilm for the roof. Diffused film spreads the intense April sunlight more evenly and helps reduce leaf scorch risk. For shading in the 44.1°C May heat, aluminium reflective shade net is a suitable option because it reflects heat rather than retaining it.
Monsoon drainage and ventilation deserve equal attention. The material match includes GI gutter sheet, a funnel at each gutter end and side skirting apron; drainage must account for July rainfall of about 361 mm. Roll-up side curtains and side insect net allow the sides to be opened fully during the humid July–October period, while maintaining insect protection.
- ISI-marked GI pipes in branded Tata, Jindal and JSW steel.
- 250-micron white diffused polyfilm, shade nets and side insect net.
- GI gutter components, fittings and the structure material counted to the selected design.
| Part | What we supply | Why in Nagpur |
|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Sunlight peaks in April at about 7 kWh per m² a day; diffused film spreads it and cuts leaf scorch. |
| Shading | Aluminium (reflective) shade net | 44°C highs and strong sun: a reflective net sends heat back out instead of holding it inside. |
| Gutters | GI gutter sheet, a funnel at each gutter end, side skirting apron | July alone brings about 361 mm of rain; size the drains for that month. |
| Ventilation | Roll-up side curtains, side insect net | Humid spell from July to October; open the curtains fully in those months. |
Plan crops around the local mandi season, not just the cover
Nagpur district market data gives a useful starting point for selecting crops and timing harvests. The listed markets include APMC Nagpur, Kamthi, Ramtek, Kalmeshwar and Hingna. These are historical modal prices from the last two years, not assured future rates, so check current arrivals and daily prices before fixing a crop plan.
For cooler-period harvests, cucumber recorded its highest month in January at ₹2,953/q across 16 markets; brinjal peaked in December at ₹1,946/q across 19 markets; and bhindi peaked in December at ₹3,888/q across 19 markets. Tomato’s highest recorded month was November at ₹2,948/q, compared with ₹753/q in March. A protected cucumber crop is a fast 3–4 month option, while vegetable seedlings can be raised in a square nethouse during the October–February nethouse season.
Leafy crops have strong October signals in this district: coriander leaves reached ₹7,249/q, methi ₹6,876/q and spinach ₹3,379/q. Green chilli had its highest recorded month in July at ₹5,414/q, but July is also the wettest month, so rain exclusion, drainage and side ventilation matter especially for any monsoon production.
- Cucumber: January historical high; suitable for protected cropping.
- Tomato: November historical high; avoid assuming March prices will match November.
- Coriander, methi and spinach: October historical highs, useful for cooler-season planning.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Tomato | 19 | ₹2,019/q | Nov (₹2,948) | Mar (₹753) |
| Brinjal | 19 | ₹1,429/q | Dec (₹1,946) | Feb (₹813) |
| Green chilli | 20 | ₹3,694/q | Jul (₹5,414) | Dec (₹2,704) |
| Okra (bhindi) | 19 | ₹2,864/q | Dec (₹3,888) | Sep (₹1,892) |
| Coriander (leaves) | 19 | ₹3,875/q | Oct (₹7,249) | Feb (₹1,810) |
| Cabbage | 17 | ₹1,214/q | Aug (₹1,667) | Apr (₹630) |
| Cauliflower | 17 | ₹1,901/q | Jul (₹3,465) | Mar (₹894) |
| Spinach | 19 | ₹2,017/q | Oct (₹3,379) | Jan (₹746) |
| Cucumber | 16 | ₹1,962/q | Jan (₹2,953) | Aug (₹1,317) |
| Methi (fenugreek leaves) | 18 | ₹3,771/q | Oct (₹6,876) | Jan (₹1,024) |
Supply to Nagpur from our Satara factory
Polyhouse Constructions is a manufacturer, a venture of Kryzen Biotech Pvt Ltd, not a Nagpur office or local stockist. Material is manufactured at Degaon on the Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra, and the factory-to-Nagpur distance is 840 km. Delivery is expected in 4 days after dispatch.
The supply can be a complete kit for an NVPH, fan-and-pad polyhouse, square nethouse or curved nethouse, or individual items where a farmer needs replacement or additional material. Construction and erection are done by Kryzen Biotech’s construction team. Confirm the chosen structure, material list and dispatch readiness before arranging site work.
- Factory supply: Degaon, Tal. Wai, Satara.
- Delivery timing: 4 days after dispatch to Nagpur.
- Erection: Kryzen Biotech construction team.
What changes when you buy from a manufacturer
For a structure expected to face May heat and the monsoon, the value is in matching every part to the design rather than buying pipes and covers separately. Polyhouse Constructions has in-house engineering and manufacturing; parts are cut and drilled to drawing, and every dispatch receives a 32-point QA check, lab test certificate and technical data sheet for each product.
The GI structure carries a 15-year manufacturing warranty, polyfilm has a 2.5-year warranty and nets have a 3-year warranty. This is different from relying on an unspecified standard design or on-site cutting. Ask any supplier for the steel source, design-specific quantities, written warranty, test documentation and the exact drainage and ventilation components included.
- Design-specific, counted material rather than an assumed standard kit.
- Branded steel and documented product information.
- Written warranties for GI structure, polyfilm and nets.
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | 30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | 15-year manufacturing warranty | Rarely a written warranty |
| Engineering | In-house engineering team | No design or load checks |
| Manufacturing | In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | 32-point QA checklist for every part | Visual check at best |
| Lab certificate | Lab test certificate with every dispatch | Not provided |
| Technical sheet | Technical data sheet for every product | Not available |
| Material match | Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | Backed by industry leader Kryzen Biotech | Single-owner workshop |
Build the kit before you book
Use the online kit builder at polyhouseconstructions.com to select the structure and see every item, quantity and that week’s rate. It is useful for comparing an NVPH with a fan-and-pad option, or for checking individual material such as polyfilm, shade net or side insect net before ordering.
Rates follow weekly GI and plastic rates and are updated every Friday. Booking requires 5% advance and 95% before dispatch. There is a 5% bulk discount when ordering 10 or more units of an item; check the builder list carefully because the discount is item-based.
- Review the full item list and quantities online.
- Compare the weekly rate before booking.
- Use the same order to align material supply and the construction plan.
Subsidy route to check before work starts
For protected cultivation under MIDH/NHM, the stated support is 50% of the cost norm up to 4,000 m² per beneficiary. The published norms include ₹844/m² for tubular NVPH, ₹1,400/m² for fan and pad, and ₹710/m² for shade net house. These are admissible cost norms, not a final quote for a particular farm.
For commercial NHB projects above 2,500 m², the guidelines state a credit-linked back-ended subsidy of 50% of project cost at admissible norms, capped at ₹56 lakh per project. NHB In-Principle Approval is required before starting. Norms and eligibility can change, so confirm the current process and documents with the Maharashtra state horticulture department before booking material or commencing construction.
- MIDH/NHM: 50% of cost norm, up to 4,000 m² per beneficiary.
- NHB commercial route: projects above 2,500 m² and approval before starting.
- Verify the current scheme with the state horticulture department.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Which polyhouse is best for Nagpur’s summer and monsoon?
A naturally ventilated polyhouse is the usual first choice because it keeps July–October rain off the crop and provides roof vents and roll-up side curtains. For summer leafy greens, a fan-and-pad polyhouse can reduce a May afternoon of about 44°C to around 32°C inside.
Can I use a nethouse throughout the year in Nagpur?
A nethouse is best used from October to February, when rainfall is low. It is suitable for seasonal nursery work and lower-cost protected growing, but does not provide the rain protection of a polyfilm-roof polyhouse during the monsoon.
How long will material delivery take to Nagpur?
Nagpur is 840 km from the Degaon, Satara factory, and delivery is expected in 4 days after dispatch. Polyhouse Constructions supplies the material; erection is carried out by Kryzen Biotech’s construction team.
What is included in a complete material kit?
A complete kit can include the GI structure, polyfilm, nets and fittings, with climate-specific components such as gutters, side curtains and insect net where selected. The online kit builder shows every item and quantity for the chosen structure.
Can I get subsidy for an NVPH or shade net house?
MIDH/NHM support is stated as 50% of the cost norm up to 4,000 m² per beneficiary, subject to current eligibility and state procedure. For larger NHB commercial projects above 2,500 m², obtain NHB In-Principle Approval before starting work and verify current norms with the state horticulture department.
Polyhouse material near Nagpur
Neighbouring towns we deliver to from the same route, and how their climate compares with Nagpur.
| Town | From Nagpur | Hottest month | Rain a year | Suits |
|---|---|---|---|---|
| Polyhouse material in Savner | ~40 km | May, 43°C | 1,092 mm | NVPH + fan & pad |
| Polyhouse material in Ramtek | ~50 km | May, 43°C | 1,222 mm | NVPH + fan & pad |
| Polyhouse material in Umred | ~50 km | May, 44°C | 1,234 mm | NVPH + fan & pad |
| Polyhouse material in Sausar | ~80 km | May, 43°C | 1,092 mm | NVPH + fan & pad |
| Polyhouse material in Narkhed | ~90 km | May, 43°C | 1,092 mm | NVPH + fan & pad |
| Polyhouse material in Pauni | ~90 km | May, 44°C | 1,234 mm | NVPH + fan & pad |
