How it worksBuy individual items

Subsidy guide · Maharashtra

Planning an NHB subsidy polyhouse project in Nagpur

By Editorial Team, Kryzen Biotech · Updated 13 November 2026

For a commercial protected-cultivation project in Nagpur, the choice between MIDH and NHB depends mainly on area, finance and when you apply—not only on the structure. Nagpur’s 44.1°C May afternoons and July–October humidity make structure selection and In-Principle Approval before construction particularly important.

NHB route
Projects above 2,500 m²
MIDH / NHM route
Up to 4,000 m² per farmer
Cost norms here
General area
Structure for this climate
NVPH or fan & pad
Subsidy-eligible protected cultivation project like those planned in Nagpur
Polyhouses, fan and pad houses and nethouses all qualify for 50% assistance at the cost norm.

First decide whether MIDH or NHB fits the project

MIDH/NHM is the practical route for an individual farmer, group or FPO planning an area up to 4,000 m² per beneficiary. Assistance is 50% of the cost, up to the applicable cost norm. The application is made through the district horticulture office.

NHB is intended for a commercial project above 2,500 m². It offers a credit-linked, back-ended subsidy of 50% of project cost at admissible norms. A term loan is required, and the subsidy is credited to that loan account after completion and inspection. NHB guidelines give a ceiling of ₹56 lakh per project; the current ceiling and norms must be confirmed before applying.

A one-acre project is about 3,952 m². It is within the MIDH 4,000 m² area limit and also above the NHB 2,500 m² threshold. Therefore, do not assume that one acre automatically means NHB: compare the district horticulture route, bank requirement and your approved project plan before choosing.

  • Use MIDH for an eligible project up to 4,000 m² per beneficiary through the district horticulture office.
  • Use NHB for a commercial project above 2,500 m² when you are taking a term loan and can follow the online IPA process.
  • Nagpur is not under hilly norms; use the general norms unless the authorities advise otherwise.
MIDH / NHM (state mission)NHB commercial project
Who it is forIndividual farmers, groups, FPOsCommercial projects: farmers, companies, FPOs, entrepreneurs
Project sizeUp to 4,000 m² per beneficiaryAbove 2,500 m² (1,000 m² in the North-East)
Assistance50% of cost, up to the cost norm50% of project cost at admissible norms, credit-linked and back-ended
CeilingArea limit per beneficiary₹56 lakh per project in the NHB scheme guidelines; check the current limit
Bank loanNot always neededNeeded: subsidy is credited to the term loan
Apply atthe district horticulture officeNHB online portal (In-Principle Approval) and your bank
From the NHB cost norms and MIDH guidelines. Limits and norms are revised from time to time and states may add their own top-up; confirm current figures with the state horticulture department before you apply.

Choose cooling and rain protection for Nagpur conditions

A naturally ventilated polyhouse is usually the first structure to examine for Nagpur. Its film roof keeps the July–October rain off the crop, while roof vents and roll-up curtains provide ventilation without power. That rain protection matters in July, August and September, when average rainfall is 361 mm, 310 mm and 200 mm respectively, and humidity is 82%, 87% and 85%.

However, a naturally ventilated structure is not the same as active cooling. April has strong sun, and May’s average afternoon high reaches 44.1°C. A fan and pad polyhouse is the better fit where a crop plan needs controlled summer temperatures and the operating system can be managed. In May, fan-and-pad cooling can bring a 44°C afternoon to about 32°C inside, which is useful for leafy greens.

Square or curved nethouses are seasonal rather than all-year rain-protected choices here. They are best considered from October to February, when rain is low. A curved nethouse offers more headroom and airflow for taller crops; a square nethouse follows the 4 × 4 m nursery grid. Shading is especially relevant when sunlight peaks in April.

  • Usual first choice: naturally ventilated polyhouse for rain exclusion and passive airflow.
  • Consider fan and pad for a crop and operating plan that needs summer cooling.
  • Use nethouse mainly for the lower-rain October–February window, rather than expecting monsoon protection.

What a one-acre fan-and-pad example looks like

The worked example below uses a 3,952 m² fan and pad polyhouse—about one acre—and the general, non-hilly norms applicable to Nagpur. The structure cost norm is ₹1,400 per m², producing an eligible structure cost of ₹55,32,800. For high-value vegetables, the planting-material norm is ₹140 per m², or ₹5,53,280 for this area.

Together, the eligible project cost in this illustration is ₹60,86,080. At 50% of the norm, the maximum indicative subsidy is ₹30,43,040 (₹30.43 lakh). This is not a promise of sanction: the sanctioned amount depends on the approved project, current norms and inspection.

The table also separates the material price from the subsidy calculation. The listed material price is ₹32,48,775 including GST, or ₹822/m², ex-factory and without freight or erection. Material price and admissible project cost are different figures; do not substitute a supplier quote for a sanctioned cost norm.

  • Structure: fan and pad polyhouse, 3,952 m².
  • Eligible project cost shown: ₹60,86,080.
  • Maximum subsidy shown at 50%: ₹30,43,040.
  • Confirm revised norms before filing, as norms can change.
ItemAmount
StructureFan and pad polyhouse
Area3,952 m² (about one acre)
Structure cost norm₹1,400 per m²
Eligible structure cost₹55,32,800
Planting material norm (high-value vegetables)₹140 per m² → ₹5,53,280
Eligible project cost₹60,86,080
Maximum subsidy at 50% of the norm₹30,43,040 (₹30.43 lakh)
Our material price this week (incl. GST)₹32,48,775 (₹822/m²)
Indicative only: the sanctioned amount depends on the approved project, current norms and inspection. Material price is ours, ex-factory, without freight or erection.

Planting material and crop planning around Nagpur markets

For the subsidy crop plan, high-value vegetables carry an NHB planting-material norm of ₹140 per m². Suitable Nagpur options listed under this group are coloured capsicum, parthenocarpic cucumber, lettuce and leafy greens. Gerbera and rose are also listed as suitable, with the relevant flower-group norms of ₹610 per m² for carnation and gerbera, and ₹426 per m² for rose and lilium. Orchid and anthurium, at ₹700 per m², are less suited.

Crop selection should not be made from subsidy eligibility alone. Build a harvesting and selling plan around local market seasonality, keeping in mind that historic mandi prices are market observations, not assured future prices. Cucumber, for example, recorded its highest month in January, while leafy crop prices in the district were strongest in October for coriander, spinach and methi.

For a farmer selling through Nagpur district markets, the table below covers APMC Nagpur, Kamthi, Kalmeshwar, Ramtek and Hingna among the reported markets. It can help frame crop timing, but quality, grading, volume and the actual market on the sale day still determine returns.

  • Cucumber: highest reported month January at ₹2,953/q; lowest August at ₹1,317/q.
  • Coriander leaves: highest reported month October at ₹7,249/q; lowest February at ₹1,810/q.
  • Methi: highest reported month October at ₹6,876/q; lowest January at ₹1,024/q.
  • Tomato: highest reported month November at ₹2,948/q; lowest March at ₹753/q.
CropMarketsAverage modal priceHighest monthLowest month
Tomato19₹2,019/qNov (₹2,948)Mar (₹753)
Brinjal19₹1,429/qDec (₹1,946)Feb (₹813)
Green chilli20₹3,694/qJul (₹5,414)Dec (₹2,704)
Okra (bhindi)19₹2,864/qDec (₹3,888)Sep (₹1,892)
Coriander (leaves)19₹3,875/qOct (₹7,249)Feb (₹1,810)
Cabbage17₹1,214/qAug (₹1,667)Apr (₹630)
Cauliflower17₹1,901/qJul (₹3,465)Mar (₹894)
Spinach19₹2,017/qOct (₹3,379)Jan (₹746)
Cucumber16₹1,962/qJan (₹2,953)Aug (₹1,317)
Methi (fenugreek leaves)18₹3,771/qOct (₹6,876)Jan (₹1,024)
Agmarknet daily prices via data.gov.in, last two years, markets in Nagpur district. ₹ per quintal.

Start at the horticulture office or NHB portal—before work

For MIDH, take the proposed site, area, structure type and crop plan to the district horticulture office before ordering or constructing. Ask for the current Maharashtra process, current cost norms, empanelment or specification requirements if any, and the sequence for inspection and release.

For NHB, file online for In-Principle Approval (IPA) through the NHB portal before work starts, then obtain the term loan sanction. IPA before construction is essential: NHB has required it before work starts since 2017. The project report should cover the structure, crop plan, project cost and repayment.

After approval and construction to the required standard, retain invoices and test certificates for inspection. A joint inspection precedes release. Under NHB, the subsidy is back-ended into the loan account; under MIDH, release is to the beneficiary as per the state process.

  • Do not begin civil or structure work and seek NHB IPA later.
  • Make the project size, quotation, DPR and bank proposal match one another.
  • Use materials meeting BIS standards and retain the supporting certificates.
  1. 1

    Pick the structure and size

    Match it to Nagpur's climate (see above) and your market. Keep under 4,000 m² for MIDH, or above 2,500 m² for an NHB project.

  2. 2

    Get a quotation and project report

    A supplier quotation listing every item with its HSN code, and for an NHB project a DPR covering cost, the high-value vegetables crop plan and repayment.

  3. 3

    Apply before you build

    MIDH: apply at the district horticulture office. NHB: file for In-Principle Approval on the NHB portal; NHB has required IPA before work starts since 2017.

  4. 4

    Bank loan (NHB)

    Get the term loan sanctioned. The subsidy is back-ended: it is paid into the loan account after the project is complete.

  5. 5

    Build to standard

    Use materials that meet BIS standards and keep the test certificates; the inspection checks structure and specification.

  6. 6

    Inspection and release

    After a joint inspection, the subsidy is released to your bank (NHB) or to you (MIDH, as per the state process).

Subsidy application steps for a polyhouse project in Nagpur

Documents that avoid an avoidable objection

Keep land and identity records ready early. For land in Maharashtra, this means the 7/12 extract (Satbara) and 8A, or a registered lease, along with a site map. Also keep Aadhaar, PAN and bank details. Companies and FPOs need their registration papers.

The technical file needs a soil and water test report, a supplier quotation showing HSN codes and specifications, and, for NHB, a detailed project report plus the bank sanction letter. Once material is purchased, preserve every invoice and test certificate. These documents connect the sanctioned design to what is actually erected.

Polyhouse Constructions is a manufacturer of protected-cultivation structures and material, supplying complete GI structure, polyfilm, net and fitting kits from its Degaon, Satara factory. Kryzen Biotech’s construction team handles erection. An itemised quotation can identify each item, size, quantity, HSN code and GST; technical data sheets and lab test certificates are provided with dispatch.

  • Land proof or registered lease and site map.
  • Identity, PAN and bank records; registration papers where applicable.
  • Soil and water report, itemised quotation and specifications.
  • DPR and bank sanction letter for NHB.
  • Purchase invoices and material test certificates after purchase.
  • Land records in your name (in Maharashtra: 7/12 extract (Satbara) and 8A), or a registered lease, with a site map
  • Aadhaar, PAN and bank details; for companies and FPOs, registration papers
  • Soil and water test report
  • Supplier quotation with HSN codes and specifications
  • Detailed project report and bank sanction letter (NHB)
  • Test certificates and invoices for the material, after purchase
Itemised quotation for Nagpur

Itemised quotation

Every item with size, quantity, HSN code and GST, ready to attach to the application.

Lab test certificates for Nagpur

Lab test certificates

Tensile, chemical, salt spray and other tests on the steel, by third-party labs.

ISI-marked GI for Nagpur

ISI-marked GI

GI pipes from Tata, Jindal or JSW steel, with a 15-year warranty.

Common mistakes that can put subsidy eligibility at risk

The biggest NHB mistake is starting work before IPA. A quotation, bank discussion or a verbal assurance does not replace an NHB In-Principle Approval. For MIDH as well, first confirm the district process before committing to construction.

Another frequent error is choosing only by initial structure cost. In Nagpur, a seasonal nethouse does not provide the same rain protection as a film-roof polyhouse during the humid July–October period, while a fan-and-pad project carries an operating requirement that must suit the crop plan. Match the structure to the months you intend to grow and sell.

Finally, do not mix up cost norm, eligible project cost, supplier price and subsidy amount. Keep the approved area consistent across land records, DPR, bank papers, quotation, invoices and final structure. Confirm the latest scheme limits with the state horticulture department because norms and limits are revised from time to time.

  • Apply and obtain IPA before beginning NHB work.
  • Do not treat historical mandi highs as assured income.
  • Do not claim hilly norms for Nagpur.
  • Keep area, design, specifications and paperwork consistent through inspection.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Can a one-acre polyhouse in Nagpur apply under NHB?

One acre is about 3,952 m², which is above the NHB commercial-project threshold of 2,500 m². It is also within the MIDH limit of 4,000 m² per beneficiary, so the suitable route depends on your finance and the current district process.

Is NHB subsidy paid before the polyhouse is built?

No. NHB support is credit-linked and back-ended, with the subsidy credited to the term loan after completion and inspection. You must obtain NHB In-Principle Approval before starting work.

Which polyhouse is best for Nagpur summer and monsoon?

A naturally ventilated polyhouse is usually the first choice because it protects crops from July–October rain and has passive ventilation. For crop plans needing active summer cooling, a fan-and-pad structure can reduce a 44°C May afternoon to about 32°C inside.

What planting-material subsidy norm applies to protected vegetables?

The NHB planting-material norm for high-value vegetables is ₹140 per m². The crop group includes coloured capsicum, parthenocarpic cucumber, lettuce and leafy greens for Nagpur.

What papers should I take for a subsidy application?

Prepare the 7/12 extract and 8A or registered lease, site map, Aadhaar, PAN, bank details, soil and water report, and an itemised supplier quotation. For NHB, also prepare the DPR and bank sanction letter; retain invoices and material test certificates after purchase.

Subsidy projects near Nagpur

The same guide for nearby towns, with the structure that suits each.

TownFrom NagpurDistrictCost normsSuits
Subsidy project in Savner~40 kmNagpurGeneralNVPH or fan & pad
Subsidy project in Ramtek~50 km—GeneralNVPH or fan & pad
Subsidy project in Umred~50 kmNagpurGeneralNVPH or fan & pad
Subsidy project in Sausar~80 kmChhindwaraGeneralNVPH or fan & pad
Subsidy project in Narkhed~90 kmNagpurGeneralNVPH or fan & pad
Subsidy project in Pauni~90 kmBhandaraGeneralNVPH or fan & pad

All towns: Subsidy projects by town

Sources

  1. NHB cost norms for protected cultivation
  2. NHB scheme guidelines (commercial horticulture)
  3. Mission for Integrated Development of Horticulture
  4. Kryzen: Polyhouse construction in Nagpur
  5. Kryzen: Polyhouse farming in Nagpur
  6. NASA POWER monthly climate averages for Nagpur
  7. Agmarknet daily prices (data.gov.in)
Build your kit