How it worksBuy individual items

Polyhouse material · Indore district, Madhya Pradesh

Polyhouse material for farms in Indore

By Editorial Team, Kryzen Biotech · Updated 13 November 2026

For an Indore farm, a naturally ventilated polyhouse is usually the first structure to consider: it keeps July rain off the crop while roof vents and roll-up curtains provide non-powered air movement. Where summer production of leafy greens is the aim, a fan-and-pad polyhouse is the better fit because May afternoons average 42.3°C and pad cooling can bring inside conditions to about 30°C.

Distance from factory
~730 km by road
Delivery after dispatch
~3 days
Hottest month
May, ~42°C
Climate pick
NVPH + fan & pad
Polyhouse built with factory-direct material, as supplied to Indore
A naturally ventilated polyhouse built with our GI structure, film and nets.

Choose the structure around Indore's heat and rain

Indore has a sharply different summer, monsoon and winter pattern. May is the hottest and sunniest month, with a 42.3°C average afternoon high and 7.3 kWh/m²/day of sun. The main wet period is July to September: July alone averages 288 mm rain, while humidity is 80% in July, 87% in August and 83% in September. A structure therefore needs to handle strong sun before the rains, then protect the crop from rain and allow maximum ventilation in the humid months.

A naturally ventilated polyhouse (NVPH) is marked as the best fit for this town. Its film roof excludes monsoon rain, and roof vents with roll-up curtains move air without power. A fan-and-pad polyhouse is a good fit when the crop needs lower summer temperature; its exhaust fans draw air through wet pads, with an estimated May inside temperature of about 30°C. Square and curved nethouses are seasonal choices here, best used from October to February when rain is low. A curved nethouse offers more air for taller crops, while the square 4 × 4 m grid is the NHB nursery design.

The four structure cards below are useful as a starting comparison, not a substitute for choosing according to crop and season.

  • NVPH: usual first choice for rain protection and naturally ventilated growing.
  • Fan & pad: consider for summer leafy greens and crops needing cooler conditions.
  • Square or curved nethouse: seasonal option for the October–February low-rain period.

The material specification should change with the climate

A complete Polyhouse Constructions kit is not only a frame and cover. It can include the GI structure, roof polyfilm, nets and fittings for an NVPH, fan-and-pad polyhouse, square nethouse or curved nethouse. Individual items are also available when a farmer needs to replace or add a particular component.

For Indore, the roof film specified in the material match is 250-micron white diffused, UV-stabilised polyfilm. May's high sunlight makes diffusion relevant because it spreads light and helps cut leaf scorch. Aluminium reflective shade net is suited to the 42°C heat because it reflects heat out rather than retaining it. GI gutter sheets with funnels are appropriate for the town's approximately 922 mm annual rain. Roll-up side curtains and side insect net are especially important in the July–September humid spell, when the curtains should be opened fully.

The table below sets out the climate-based match part by part. It is a practical checklist to discuss before finalising a kit, particularly if the crop will remain under cover through May or the monsoon.

  • 250-micron white diffused, UV-stabilised roof polyfilm.
  • Aluminium reflective shade net for peak heat and sun.
  • GI gutter sheet with funnels, plus roll-up side curtains and side insect net.
PartWhat we supplyWhy in Indore
Roof film250-micron white diffused polyfilmSunlight peaks in May at about 7.3 kWh per m² a day; diffused film spreads it and cuts leaf scorch.
ShadingAluminium (reflective) shade net42°C highs and strong sun: a reflective net sends heat back out instead of holding it inside.
GuttersGI gutter sheet with funnelsAbout 922 mm of rain a year, so standard gutters are enough.
VentilationRoll-up side curtains, side insect netHumid spell from July to September; open the curtains fully in those months.
Climate figures are NASA POWER monthly averages for the town; inside temperatures are estimates.

Crops and mandi months worth planning for

Protected cultivation can be planned with the Indore district mandi pattern in mind. The listed markets include Sanwer(F&V) APMC, Indore(F&V) APMC, Mhow (Ambedkar Nagar) (F&V) APMC, Mhow(F&V) APMC and Gautampura(F&V) APMC. These are district-market observations, so they are useful for timing decisions, not a promise of the price a future crop will receive.

Among the listed vegetables, green chilli had its highest recorded month in March at ₹4,718/q, and coriander leaves in March at ₹6,050/q. Green peas peaked in November at ₹4,886/q. Tomato and cauliflower both show December as their highest month, at ₹2,652/q and ₹1,371/q respectively. Okra and brinjal show January highs of ₹3,617/q and ₹1,331/q. These month differences can help a farmer work backward from the intended harvest window before selecting a structure and crop.

For protected growing options shown for Indore, consider coloured capsicum, parthenocarpic cucumber, lettuce and leafy greens, gerbera and rose, or vegetable seedlings. The crop cards identify lettuce and leafy greens with fan-and-pad cooling for summer, and vegetable seedlings with a square nethouse from October to February. Cucumber is described as a fast 3–4 month crop; its drip irrigation use is relevant in dry spells.

  • For a November market window, review green peas data.
  • For December, compare tomato and cauliflower market patterns.
  • For January, review okra and brinjal; for March, green chilli and coriander leaves.
CropMarketsAverage modal priceHighest monthLowest month
Cauliflower7₹1,054/qDec (₹1,371)Oct (₹879)
Tomato8₹1,768/qDec (₹2,652)Feb (₹1,094)
Green chilli7₹3,054/qMar (₹4,718)Dec (₹1,994)
Green peas15₹3,859/qNov (₹4,886)Jul (₹3,487)
Bottle gourd8₹1,390/qOct (₹1,672)Dec (₹1,192)
Okra (bhindi)8₹2,346/qJan (₹3,617)Dec (₹1,333)
Spinach7₹931/qJul (₹1,169)May (₹716)
Brinjal8₹1,104/qJan (₹1,331)Apr (₹922)
Cabbage6₹909/qJan (₹1,273)Apr (₹686)
Coriander (leaves)13₹3,664/qMar (₹6,050)Aug (₹1,736)
Agmarknet daily prices via data.gov.in, last two years, markets in Indore district. ₹ per quintal.

Reading the year before deciding nethouse or film roof

An open nethouse should not be treated as a year-round substitute for a rain-protected polyhouse in Indore. The identified nethouse season is October through February. In that period, rainfall is 26 mm in October, 12 mm in November, 4 mm in December, 5 mm in January and 3 mm in February. It is a suitable lower-cost seasonal route for shade and insect-net based growing or nursery work.

The decision changes from June onward. Rain rises to 129 mm in June, then 288 mm in July, 275 mm in August and 158 mm in September. A film-roof NVPH has the advantage of keeping this rain off the crop, while the side curtains support ventilation through the humid period. May should be treated as the peak heat and strongest-sun month in crop and material planning, rather than relying on a standard design.

The calendar below puts those constraints on one line: May for heat and sun, July for the highest rainfall, July–September for humidity, and October–February for the nethouse season.

  • May: 42.3°C high and 7.3 kWh/m²/day sun.
  • July: 288 mm rain; August: 87% humidity.
  • October–February: indicated seasonal window for nethouses.
MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~42°C highs
Strongest sun7.3 kWh/m²/day
Wettest month~288 mm
Humid (75%+)July–September
Nethouse seasonOctober–February

Material dispatch to Indore and what arrives

Polyhouse Constructions is a manufacturer of protected-cultivation structures and material, and a venture of Kryzen Biotech Pvt Ltd. Material is manufactured at Degaon, Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra; there is no Polyhouse Constructions office in Indore. The factory-to-Indore distance in the planning data is 730 km, and delivery is expected in 3 days after dispatch.

For a complete kit, the buyer receives the designed GI structure, polyfilm, nets and fittings rather than having to source each category separately. GI pipes are ISI-marked branded steel from Tata, Jindal and JSW. The stated warranties are 15 years on the GI structure, 2.5 years on polyfilm and 3 years on nets.

Construction and erection are done by Kryzen Biotech's construction team, not by a claimed local Polyhouse Constructions office. That distinction matters when requesting material supply versus planning erection: a farmer can buy a complete material kit or individual components, while construction is handled by the Kryzen Biotech team.

  • Factory dispatch point: Degaon, Tal. Wai, Satara, Maharashtra.
  • Planning distance to Indore: 730 km.
  • Delivery timing: 3 days after dispatch.

Why a designed manufacturer kit differs from site-fabricated supply

When comparing quotes, ask whether the frame is engineered and cut to a drawing, whether every component is counted, and whether material documents come with dispatch. Polyhouse Constructions has in-house engineering and manufacturing, a 32-point QA checklist for every part, lab test certificates with dispatch and a technical data sheet for every product. Its material is cut and drilled to drawing rather than simply being bought as pipe and cut on site.

The comparison table below explains the manufacturer-versus-typical-local-fabricator difference. It lists the 15-year manufacturing warranty, branded steel sources and the stated zero material mismatch approach alongside the checks and documentation. It is useful for evaluating like-for-like scope, not merely comparing a single overall quote.

For Indore's rain, humidity and high May sun, component matching is as important as the frame. A kit should therefore be reviewed for the specified film, shade net, insect net, curtains, gutters and fittings, rather than treating all polyhouse material as interchangeable.

  • Ask for drawing-based quantities and a technical data sheet.
  • Check the dispatch lab test certificate and stated warranty.
  • Compare film, nets, gutters and ventilation items as well as GI pipes.
What you getPolyhouse ConstructionTypical local fabricator
Experience30 years of collective experience in greenhouse engineeringOften a small crew learning on the job
Technical know-howStrong technical understanding: structure planned for your climate and cropUsually repeats one standard design
Warranty15-year manufacturing warrantyRarely a written warranty
EngineeringIn-house engineering teamNo design or load checks
ManufacturingIn-house manufacturing, cut and drilled to drawingBuys pipes from traders, cuts on site
Quality checks32-point QA checklist for every partVisual check at best
Lab certificateLab test certificate with every dispatchNot provided
Technical sheetTechnical data sheet for every productNot available
Material matchZero material mismatch: every part counted per designShort or excess material is common
Raw materialBranded steel from Tata, Jindal and JSWUnbranded or mixed sources
PriceLowest cost across India, with real-time price benefits from weekly ratesFixed quote; rate drops are not passed on
BackingBacked by industry leader Kryzen BiotechSingle-owner workshop

Build the order and check subsidy before work starts

Start at polyhouseconstructions.com and build the kit online. The kit builder shows every item, quantity and that week's rate, allowing the farmer to select a complete structure material kit or individual items. Prices follow weekly GI and plastic rates, updated every Friday. A 5% bulk discount applies on 10 or more units of an item.

For booking, the stated payment schedule is 5% advance and 95% before dispatch. Before paying, fix the structure type, crop, dimensions required for the farm, and whether the order is material-only or also requires construction by Kryzen Biotech's team. Confirm the item list against the Indore climate needs described above.

Subsidy should be checked before starting the project. MIDH/NHM support is stated as 50% of the cost norm up to 4,000 m² per beneficiary. For commercial projects above 2,500 m², NHB guidelines state a credit-linked back-ended subsidy of 50% of project cost at admissible norms, capped at ₹56 lakh per project; In-Principle Approval from NHB is needed before starting. Current norms and eligibility should be confirmed with the Madhya Pradesh state horticulture department because norms change.

  • Build and review the item-wise kit online before booking.
  • Rates update every Friday; 10+ units of an item receive 5% bulk discount.
  • Check MIDH/NHM or NHB eligibility and approvals before project start.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Which polyhouse is best for an Indore farm?

A naturally ventilated polyhouse is the usual first choice because its film roof keeps monsoon rain off the crop and its vents and roll-up curtains move air without power. For summer leafy greens, a fan-and-pad polyhouse is a good fit: May averages 42.3°C outside and pad cooling can bring inside conditions to about 30°C.

Can I use a nethouse throughout the year in Indore?

The indicated nethouse season is October to February, when rainfall is comparatively low. From July to September, rain and humidity are high, so a rain-protected polyhouse is the more suitable structure option.

How long does polyhouse material take to reach Indore?

The factory planning distance to Indore is 730 km from Degaon, Tal. Wai, Satara, Maharashtra. Delivery is stated as 3 days after dispatch.

What material is included in a complete kit?

A complete kit can include the GI structure, polyfilm, nets and fittings for the selected structure. For Indore, the climate match includes 250-micron white diffused polyfilm, aluminium reflective shade net, GI gutters with funnels, and roll-up curtains with side insect net where applicable.

What subsidy can an Indore farmer check for a polyhouse?

MIDH/NHM is stated as 50% of the cost norm up to 4,000 m² per beneficiary. NHB commercial projects above 2,500 m² can have a credit-linked back-ended subsidy of 50% of project cost at admissible norms, capped at ₹56 lakh, but In-Principle Approval is needed before starting and current eligibility should be confirmed with the state horticulture department.

Polyhouse material near Indore

Neighbouring towns we deliver to from the same route, and how their climate compares with Indore.

TownFrom IndoreHottest monthRain a yearSuits
Polyhouse material in Rau~10 kmMay, 41°C922 mmNVPH + fan & pad
Polyhouse material in Mhow Cantonment~20 kmMay, 41°C922 mmNVPH + fan & pad
Polyhouse material in Mhowgaon~20 kmMay, 41°C922 mmNVPH + fan & pad
Polyhouse material in Pithampur~20 kmMay, 41°C922 mmNVPH + fan & pad
Polyhouse material in Dewas~50 kmMay, 42°C1,014 mmNVPH + fan & pad
Polyhouse material in Ujjain~70 kmMay, 42°C927 mmNVPH + fan & pad

All towns: Polyhouse material by town

Sources

  1. Kryzen: Polyhouse construction in Indore
  2. Kryzen: Polyhouse farming in Indore
  3. NASA POWER monthly climate averages for Indore
  4. MIDH operational guidelines (protected cultivation)
  5. NHB commercial horticulture scheme guidelines
  6. Agmarknet daily prices (data.gov.in)
Build your kit