Equipment · Indore district, Madhya Pradesh
Protected-cultivation equipment for Indore farms
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
For Indore, protected-cultivation equipment has to deal first with a very hot, bright April–May, then heavy rain and humidity from July to September. Polyhouse Constructions manufactures complete material kits and individual equipment; material is supplied from our Satara factory, while erection is carried out by Kryzen Biotech’s construction team.
- Pad cooling
- Works: ~30°C inside
- Humid months
- 3
- Shading need
- High
- Delivery
- ~3 days

Start with Indore’s actual equipment load
May is the defining month for cooling: the average afternoon high is 42.3°C, sunlight reaches 7.3 kWh/m²/day and wind averages 4.2 m/s. April is nearly as demanding at 40.8°C with 7.1 kWh/m²/day of sun. A covered crop needs both heat reduction and a planned route for hot air to leave the structure; simply adding a cover without ventilation can hold heat inside.
The monsoon changes the requirement. July receives about 288 mm of rain, August 275 mm and September 158 mm. Relative humidity is 80% in July, 87% in August and 83% in September. That makes clear rain collection, working side ventilation, intact insect net and air movement important parts of the equipment list rather than add-ons.
Winter is less severe for structure equipment, but nights still fall to 10.7°C in January and 11.7°C in December. Indore’s useful nethouse season is October–February. There is no stated extra night-protection requirement in the climate priority list; the practical focus is maintaining the covering, nets and fittings through this period.
- April–May: cooling and reflective shading are the priority.
- July–September: roof/side ventilation, circulation, gutters and insect exclusion need attention.
- October–February: inspect and tighten the house before the next hot season.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 27.8°C | 10.7°C | 36% | 5 mm | 4.5 | 2 |
| Feb | 31.7°C | 13.8°C | 28% | 3 mm | 5.4 | 2.1 |
| Mar | 36.3°C | 18.4°C | 23% | 7 mm | 6.4 | 2.2 |
| Apr | 40.8°C | 23.3°C | 21% | 4 mm | 7.1 | 2.9 |
| May | 42.3°C | 26.4°C | 30% | 11 mm | 7.3 | 4.2 |
| Jun | 36.7°C | 25.5°C | 58% | 129 mm | 5.7 | 4.1 |
| Jul | 30.8°C | 23.4°C | 80% | 288 mm | 4.1 | 3.8 |
| Aug | 29°C | 22.6°C | 87% | 275 mm | 3.8 | 3.1 |
| Sep | 29.8°C | 21.7°C | 83% | 158 mm | 4.7 | 2.1 |
| Oct | 30.8°C | 18.5°C | 67% | 26 mm | 5.2 | 1.5 |
| Nov | 29.7°C | 14.8°C | 55% | 12 mm | 4.6 | 1.5 |
| Dec | 28.1°C | 11.7°C | 43% | 4 mm | 4.2 | 1.7 |
A practical system choice for Indore
A naturally ventilated polyhouse (NVPH) suits growers who need polyfilm cover, side insect net and roll-up curtains. It uses the manual gear roll-up curtain unit, side insect net and optionally air-circulation fans. A square nethouse uses shade net and side insect net, while a curved nethouse can use shade net; the equipment list differs, so the crop and season should drive the choice.
For the hottest production window, fan-and-pad equipment is the stronger cooling option in this climate. The Indore priority is exhaust fans plus cellulose pads, with the stated potential to bring May’s 42°C conditions to about 30°C inside. It is not a claim that the system will automatically repay its cost: payback depends on the crop, crop management, market timing and the full operating cost, none of which can be calculated from equipment price alone.
Use the district market seasons when deciding whether protected production timing is worthwhile. Indore district data records green chilli’s highest month in March at ₹4,718/q and coriander leaves’ highest month in March at ₹6,050/q. Tomato’s highest listed month is December at ₹2,652/q, green peas November at ₹4,886/q, and bhindi January at ₹3,617/q. These are historical modal prices, not assured future prices.
- NVPH: polyfilm, side insect net and roll-up curtain ventilation.
- Fan & pad: exhaust fans, cellulose pads, pad frames, gutters and polyfilm.
- Square or curved nethouse: shade-net-based protection for the crop and season.
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Fan and pad cooling: what to budget for
Indore’s dry pre-monsoon heat is why fan-and-pad cooling works here. It is particularly relevant before and during May, rather than being selected merely because a polyhouse is being built. The system requires exhaust fans at one end and wetted cellulose pads in a frame, so it should be planned as a complete cooling arrangement.
Current listed item prices are ₹22,700 per exhaust fan + GST, ₹2,616 per 600X150X1800 cellulose pad + GST, and ₹815 per metre for the 150 mm aluminium pad frame + GST. An air-circulation fan is ₹8,999 per piece + GST and can be an optional upgrade in an NVPH or fan-and-pad house. These are live listed material prices, while weekly GI and plastic rates are updated every Friday.
For scale only, the reference fan-and-pad house of 52 × 76 m (3,952 m²) uses 12 exhaust fans and 82 cellulose pads, with material including GST shown as ₹32,48,775. This is a sizing example, not a quotation or a universal layout for every farm. Engineering should match the selected structure and requirement.
- Do not compare a fan-and-pad house only by fan count; pads, frames and air movement are part of the cooling system.
- Clean water-side components and fan shutters before the summer peak.
- Consider whether the intended crop and sale period justify controlled cooling before ordering.
Shade, rain handling and air movement
For May sun, an aluminium shade net or double-layer net is the stated shading priority. The aluminium shade net (4 m) is ₹315 per metre + GST; white shade net 50% and green shade net 50% are each ₹27 per metre + GST. The white diffused 250-micron polyfilm (4.5 m), used in NVPH and fan-and-pad houses, is ₹254 per metre + GST. It is UV stabilised.
July rain calls for standard gutters. The GI gutter sheet is ₹335 per metre + GST, the gutter funnel is ₹1,350 per piece + GST and the 1.5 m side skirting apron is ₹64 per metre + GST. Before the wettest months, these parts must be positioned and kept clear so rainwater is directed as intended.
During the humid period, ventilation is crop protection as well as temperature management. A manual gear roll-up curtain unit is ₹1,050 per piece + GST, curtain pipe (27X2.0X6000) is ₹758 per piece + GST, and side insect net (5.2 m) is ₹221 per metre + GST. The curtain clamp is ₹11 per piece + GST. Opening and closing curtains in response to conditions while keeping insect net whole is more useful than leaving a damaged side permanently open.
- Use shade to manage intense sun; select white diffused film for covered NVPH or fan-and-pad systems.
- Provide gutter sheets and funnels in polyfilm-covered systems facing the monsoon.
- Use roof vents and curtains for air movement in humid July–September conditions.
| Need | For Indore | Why |
|---|---|---|
| Cooling | Exhaust fans + cellulose pads | Pads bring 42°C to ~30°C in May |
| Air movement | Roof vent + curtains | Humid from July to September |
| Shading | Aluminium or double-layer net | Sun peaks at 7.3 kWh/m² in May |
| Rain | Standard gutters | July: ~288 mm |
| Nights | No extra need | — |
An Indore maintenance calendar
Before May, wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust-fan belt and shutter. This work should be completed ahead of the 42°C peak, not after a cooling shortfall appears in the crop.
Before July, clear gutters and funnels, re-seat the side skirting apron and check film tension. July’s rainfall is about 288 mm, so blocked drainage or loose covering should be dealt with before sustained rain. Through July to September, run air-circulation fans in the mornings, grease curtain gear units and examine insect net for tears; humid air increases disease and pest pressure.
From October to February, tighten clamps and bolts, inspect GI springs in aluminium profiles, and order replacement film or net ahead of the next season. This is also the local nethouse season, with October through February providing a cooler operating period than April–May.
- Before May: pads, gutters, filters, fan belts and shutters.
- Before July: gutters, funnels, skirting apron and film tension.
- July–September: circulation, curtain gears and insect-net inspection.
- October–February: clamps, bolts, springs, film and net replacement planning.
- 1
Before May
Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 42°C peak.
- 2
Before July
Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 288 mm.
- 3
July to September
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 4
October to February
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
What to check before accepting material
The structure material is made with ISI-marked, branded steel from Tata, Jindal and JSW. Polyhouse Constructions has in-house engineering and manufacturing, a 32-point QA checklist for every part, lab test certificates with dispatch, and a technical data sheet for every product. Material is cut and drilled to drawing, helping the kit match the intended design.
Ask to see the supplied documentation and verify the dispatch against the kit list: GI structure, polyfilm, nets and fittings should be counted to the selected design. The relevant tests include tensile testing of GI pipe steel strength by a third-party lab, salt-spray testing for corrosion resistance and chemical analysis by spectrometer for steel composition.
The manufacturing warranty is 15 years on the GI structure, 2.5 years on polyfilm and 3 years on shade and insect nets. Warranty does not remove the need for the seasonal checks above, particularly where rainwater, humidity and moving curtains affect the working parts.
- GI structure: 15-year manufacturing warranty.
- Polyfilm: 2.5-year warranty.
- Shade and insect nets: 3-year warranty.

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Indore.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Ordering kits, fittings and replacement spares
A complete kit can be built online at polyhouseconstructions.com with each item, quantity and that week’s rate visible. Kits are available for NVPH, fan-and-pad polyhouses, square nethouses and curved nethouses. Individual items are also sold for repairs, extensions or planned spares, including fans, pads, nets and fittings.
For example, an aluminium profile is ₹27 per metre + GST, GI spring ₹6 per metre + GST, 60 mm full clamp ₹17 per piece + GST and a 48 OD four-way pipe coupler ₹130 per piece + GST. Prices follow weekly GI and plastic rates, updated every Friday; a 5% bulk discount applies on 10+ units of an item. Booking is with 5% advance and 95% before dispatch.
Material is supplied from the Degaon factory on the Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra, not from an Indore office. The stated delivery time to Indore is 3 days after dispatch. Construction or erection, where required, is done by Kryzen Biotech’s construction team.
- Keep critical repair items identifiable from the original kit list.
- Order individual material at the weekly rate for repairs and extensions.
- Check the current Friday-updated rate before finalising an order.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Does fan-and-pad cooling make sense in Indore?
Yes, it is suited to Indore’s hot pre-monsoon conditions: May averages 42.3°C and the stated pad-cooled inside temperature is about 30°C. Whether it pays for a particular farm cannot be promised from climate data alone; it depends on crop, market timing, management and operating costs.
What should I prepare before Indore’s monsoon?
Before July, clear gutter sheets and funnels, re-seat the side skirting apron and check film tension. July receives about 288 mm of rain, followed by 275 mm in August, so drainage and covering condition should be checked before the wet period.
Which equipment is useful in humid July to September?
Use roof vent and curtains for ventilation, and maintain air circulation in the mornings. Check insect nets for tears and keep curtain gear units greased, as humidity averages 80% in July, 87% in August and 83% in September.
Can I buy only replacement nets, fittings or cooling parts?
Yes. Fans, pads, nets and fittings are sold individually for repairs and extensions at the weekly rate. Examples include GI springs, clamps, aluminium profiles, insect net and exhaust fans.
What warranty and quality papers come with the material?
The GI structure carries a 15-year manufacturing warranty, polyfilm 2.5 years, and shade and insect nets 3 years. Every dispatch includes lab test certificates and product technical data sheets, with a 32-point QA checklist for every part.
Equipment supply near Indore
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Indore | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Rau | ~10 km | Works (~29°C) | 3 | May, 41°C |
| Equipment supplier in Mhow Cantonment | ~20 km | Works (~29°C) | 3 | May, 41°C |
| Equipment supplier in Mhowgaon | ~20 km | Works (~29°C) | 3 | May, 41°C |
| Equipment supplier in Pithampur | ~20 km | Works (~29°C) | 3 | May, 41°C |
| Equipment supplier in Dewas | ~50 km | Works (~30°C) | 3 | May, 42°C |
| Equipment supplier in Ujjain | ~70 km | Works (~30°C) | 3 | May, 42°C |



