How it worksBuy individual items

Polyhouse material · Thane district, Maharashtra

Polyhouse material and nethouse kits for Thane farms

By Editorial Team, Kryzen Biotech · Updated 13 November 2026

For a Thane farm, a naturally ventilated polyhouse is usually the practical starting structure because it keeps the June–October rain off the crop while allowing passive ventilation. The key decision is not only the frame: 2,509 mm annual rain, July’s 834 mm rainfall and five humid months make drainage, side ventilation and the right coverings essential parts of the material kit.

Distance from factory
~220 km by road
Delivery after dispatch
Next day
Hottest month
April, ~38°C
Climate pick
NVPH + fan & pad
Polyhouse built with factory-direct material, as supplied to Thane
A naturally ventilated polyhouse built with our GI structure, film and nets.

Start with a roofed, naturally ventilated polyhouse

Thane is among the wetter locations in Maharashtra: annual rainfall is 2,509 mm, compared with the state average of 1,176 mm. Rain is especially concentrated in the monsoon. June receives about 535 mm, July 834 mm, August 606 mm and September 376 mm. A film-roof naturally ventilated polyhouse (NVPH) protects a crop from direct rain in this period, while roof vents and roll-up side curtains allow air exchange without depending on power.

Humidity is the second design issue. It remains at 75% or more from June through October, reaching 90% in July and August. A closed structure without adequate vents can hold humid air around the crop. For this reason, specify a layout with roof ventilation, roll-up side curtains and side insect net rather than treating the cover as the whole structure.

A fan-and-pad polyhouse is a good fit where summer cooling is the crop requirement, particularly for leafy greens. April is Thane’s hottest month, with a 38.4°C average afternoon high; a pad-cooled house can bring that to about 32°C inside. A square or curved nethouse is more seasonal here—best used from November to February, when rainfall is low. The structure comparison below helps place these choices side by side.

  • Choose NVPH when monsoon rain protection and natural air movement are the priority.
  • Consider fan and pad for crops that need lower summer temperatures.
  • Use a nethouse mainly in the November–February low-rain window, not as the monsoon substitute for a film roof.

Specify the materials around rain, humidity and April sun

A complete kit should be designed as connected parts, not selected pipe by pipe. Polyhouse Constructions supplies the GI structure, polyfilm, nets and fittings in a complete material kit; individual items are also available. For Thane, the roof covering is 250-micron white diffused, UV-stabilised polyfilm. April sunlight reaches 7.1 kWh/m²/day, so diffused film helps spread the incoming light and reduce leaf scorch risk.

The gutter and drainage details deserve attention before erection. GI gutter sheet, a funnel at each gutter end and a side skirting apron are supplied for the rain-management arrangement. Their importance is clear in July, when average rainfall is about 834 mm. Ensure that the site’s drain outlet can take the collected roof water; a protected roof is only useful when runoff has a clear exit.

For heat management, aluminium reflective shade net is an option because it reflects heat rather than holding it inside. Side insect net, roll-up curtains with gear unit, and an entry cabin support ventilation and pest exclusion during the humid months. The table below matches these items to the local climate conditions.

  • Ask for the roof film, gutter components, curtains, insect net and entry cabin to be shown separately in your kit list.
  • Do not omit ventilation components simply because the structure has a rainproof roof.
  • For nethouses, available shade-net options include white, green and black 50% shade net, as well as aluminium reflective shade net.
PartWhat we supplyWhy in Thane
Roof film250-micron white diffused polyfilmSunlight peaks in April at about 7.1 kWh per m² a day; diffused film spreads it and cuts leaf scorch.
ShadingAluminium (reflective) shade net38°C highs and strong sun: a reflective net sends heat back out instead of holding it inside.
GuttersGI gutter sheet, a funnel at each gutter end, side skirting apronJuly alone brings about 834 mm of rain; size the drains for that month.
VentilationRoll-up side curtains with gear unit, side insect net, entry cabinHumidity stays at 75% or more from June to October; open sides and a double-door cabin keep air moving and pests out.
Climate figures are NASA POWER monthly averages for the town; inside temperatures are estimates.

Plan crops around protection and the selling season

Protected cultivation does not guarantee a market price, but district mandi history can help a farmer decide which crop and harvest window to investigate. The Thane district market set includes APMC Kalyan, Kalyan APMC, Kalyan, Murbad, APMC Murbad, Murbad APMC, Shahapur and Shahapur APMC. These are relevant selling references for farms in and around Thane, including Bhiwandi, Kalyan-Dombivli, Mira-Bhayandar, Navi Mumbai and Ulhasnagar.

For lower-rain months, cucumber and okra are examples to evaluate. Cucumber’s reported district average modal price was ₹2,202/q, with its highest month in December at ₹2,732/q; bhindi averaged ₹3,376/q and peaked in December at ₹4,479/q. Green peas had the highest listed average, ₹9,410/q, and a November high of ₹12,125/q, though it was recorded across three markets. These figures are historical modal prices, not a promise of future rates.

For monsoon-oriented harvest planning, several crops in the district showed highest months in July: beans at ₹6,932/q, capsicum at ₹6,111/q, green chilli at ₹5,774/q, ridge gourd at ₹5,548/q, brinjal at ₹4,493/q and bottle gourd at ₹2,732/q. Bitter gourd’s listed high was June at ₹4,667/q. Since June–October is also humid and rainy, match such crop plans with a structure capable of rain exclusion and ventilation, and check current market demand before planting.

  • Cucumber: highest listed month December; lowest listed month February at ₹1,686/q.
  • Capsicum: highest listed month July; lowest listed month February at ₹2,614/q.
  • Do not plant only for a historical high month—consider crop duration, local demand and your ability to manage humidity.
CropMarketsAverage modal priceHighest monthLowest month
Okra (bhindi)8₹3,376/qDec (₹4,479)May (₹2,446)
Green peas3₹9,410/qNov (₹12,125)Mar (₹6,785)
Beans6₹4,475/qJul (₹6,932)Jan (₹2,290)
Bitter gourd8₹3,310/qJun (₹4,667)Oct (₹2,336)
Cucumber5₹2,202/qDec (₹2,732)Feb (₹1,686)
Ridge gourd5₹3,636/qJul (₹5,548)Oct (₹2,513)
Capsicum7₹3,893/qJul (₹6,111)Feb (₹2,614)
Green chilli4₹4,056/qJul (₹5,774)Sep (₹2,734)
Brinjal7₹2,949/qJul (₹4,493)Feb (₹2,087)
Bottle gourd6₹1,689/qJul (₹2,732)Apr (₹1,276)
Agmarknet daily prices via data.gov.in, last two years, markets in Thane district. ₹ per quintal.

Use the annual weather window instead of one fixed crop schedule

January is the coolest period, with a 15.4°C average night low, and rainfall is near zero. November, December, January and February are therefore the workable nethouse season identified for Thane. This is also the period to assess nursery work: vegetable seedlings are suited to a square nethouse from November to February for the local planting season.

March to May changes the requirement from rain protection to light and heat management. Thane’s strongest sun is in April, and both April and May record 7.1 kWh/m²/day. April’s 38.4°C average high makes reflective shade and ventilation useful for crops sensitive to heat. A fan-and-pad structure is the option when the crop needs active cooling through this spell.

From June onward, prepare for wet, humid conditions rather than assuming lower daytime temperatures remove all stress. July’s average high is only 28.4°C, but humidity is 90% and rainfall is at its annual peak. Keep side curtains and drainage arrangements usable, and select crops and management practices appropriate to a humid protected environment. The year-at-a-glance calendar below puts these changes on one line.

  • November–February: seasonal nethouse window.
  • April: peak heat and strongest sun.
  • June–October: humid period; July is the wettest month.
MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~38°C highs
Strongest sun7.1 kWh/m²/day
Wettest month~834 mm
Humid (75%+)June–October
Nethouse seasonNovember–February

What arrives in a complete kit, and who erects it

Polyhouse Constructions is a manufacturer of protected-cultivation structures and material, and a venture of Kryzen Biotech Pvt Ltd. Material is manufactured at the Degaon factory on the Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra. We do not have an office in Thane.

A full kit is made around the selected NVPH, fan-and-pad polyhouse, square nethouse or curved nethouse. It can include the GI structure, 250-micron polyfilm where applicable, shade or insect nets, gutters, curtains, gear units and fittings. GI pipes are ISI-marked branded steel from Tata, Jindal and JSW. The GI structure carries a 15-year manufacturing warranty, polyfilm 2.5 years and nets 3 years.

Construction is not left to an unspecified material delivery. Erection is done by Kryzen Biotech’s construction team. Before ordering, give the team the intended structure type, crop, site dimensions and whether the main objective is monsoon protection, shade, nursery production or summer cooling. That enables the material list to reflect the actual structure instead of an incomplete generic bundle.

  • Complete kits: GI structure, polyfilm, nets and fittings.
  • Individual material items are also available.
  • Construction/erection: Kryzen Biotech’s construction team.
Coloured capsicum for Thane

Coloured capsicum

NVPH

Grow under shade net through April, when highs reach 38°C.

Cucumber (parthenocarpic) for Thane

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Lettuce and leafy greens for Thane

Lettuce and leafy greens

Fan & pad polyhouse

Pads bring April afternoons down to about 32°C, so greens can grow through summer.

Gerbera and rose for Thane

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

Vegetable seedlings for Thane

Vegetable seedlings

Square nethouse

Raise nursery seedlings from November to February for the local planting season.

Manufacturer support compared with a local fabrication quote

A local fabricator quote may look simple, but compare what is actually included before deciding. For a high-rain Thane site, the drawing, counted fittings, drainage materials and ventilation elements matter as much as pipe weight. Polyhouse Constructions has in-house engineering and manufacturing; parts are cut and drilled to drawing rather than being bought from traders and cut on site.

Every dispatch has a 32-point QA checklist, lab test certificate and technical data sheet for every product. The intended material match is counted per the design, helping avoid shortages or excess material. The comparison below sets this against what is commonly offered by a typical local fabricator; it is a checklist a buyer can use when comparing quotations.

A manufacturer also provides material traceability through branded steel and written warranty terms. Ask any supplier to state the steel source, engineering responsibility, list of fittings, warranty and test documentation in writing. That makes two quotations comparable beyond the headline amount.

  • Check whether gutters, curtain mechanisms, insect net and entry arrangement are included.
  • Ask for a drawing-based item and quantity list.
  • Compare documentation and warranty, not only the frame rate.
What you getPolyhouse ConstructionTypical local fabricator
Experience30 years of collective experience in greenhouse engineeringOften a small crew learning on the job
Technical know-howStrong technical understanding: structure planned for your climate and cropUsually repeats one standard design
Warranty15-year manufacturing warrantyRarely a written warranty
EngineeringIn-house engineering teamNo design or load checks
ManufacturingIn-house manufacturing, cut and drilled to drawingBuys pipes from traders, cuts on site
Quality checks32-point QA checklist for every partVisual check at best
Lab certificateLab test certificate with every dispatchNot provided
Technical sheetTechnical data sheet for every productNot available
Material matchZero material mismatch: every part counted per designShort or excess material is common
Raw materialBranded steel from Tata, Jindal and JSWUnbranded or mixed sources
PriceLowest cost across India, with real-time price benefits from weekly ratesFixed quote; rate drops are not passed on
BackingBacked by industry leader Kryzen BiotechSingle-owner workshop

Delivery to Thane and ordering through the kit builder

Thane is about 220 km from the Satara factory. Delivery is normally 1 day after dispatch. This is delivery after dispatch, so keep the factory confirmation and construction sequence in mind when fixing the farm readiness date.

Build the material list online at polyhouseconstructions.com. The kit builder lets you see every item, quantity and that week’s rate, which is useful when checking whether climate-critical items such as gutter components or side insect net are included. Prices follow weekly GI and plastic rates and are updated every Friday; a rate should therefore be checked again when you are ready to book.

Booking requires 5% advance and 95% before dispatch. A 5% bulk discount applies on 10 or more units of an item. Once the kit scope is settled, coordinate erection with Kryzen Biotech’s construction team and prepare the site so delivery and construction do not get separated.

  • Factory to Thane: about 220 km.
  • Normal delivery: 1 day after dispatch.
  • Payment terms: 5% advance; 95% before dispatch.

Check subsidy eligibility before starting work

For protected cultivation, MIDH/NHM support is stated as 50% of the cost norm, up to 4,000 m² per beneficiary. Thane is not under the hilly norms in this brief, so use the standard norms as the initial reference: NVPH tubular ₹844/m², fan and pad ₹1,400/m² and shade-net house ₹710/m². These are cost norms, not a final sanctioned amount or a material quotation.

For commercial projects above 2,500 m², NHB guidelines state a credit-linked back-ended subsidy of 50% of project cost at admissible norms, capped at ₹56 lakh per project. In-Principle Approval from NHB is needed before starting. Norms can change, so confirm the current process, eligible design and documents with the Maharashtra state horticulture department before booking material or beginning civil work.

  • MIDH/NHM: 50% of cost norm, up to 4,000 m² per beneficiary.
  • NHB commercial route: projects above 2,500 m²; approval is needed before starting.
  • Confirm current norms and procedure with the state horticulture department.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Which polyhouse is most suitable for a Thane farm?

A naturally ventilated polyhouse is usually the first choice because its film roof protects crops from the heavy June–October rain while roof vents and roll-up curtains move air. Choose fan and pad when your crop needs summer cooling; in April it can reduce a 38°C afternoon to about 32°C inside.

Can I use a nethouse in Thane during the monsoon?

A nethouse is described as seasonal for Thane and is best from November to February, when rain is low. With 834 mm average rain in July and 90% humidity in July and August, it does not provide the rain exclusion of a film-roof polyhouse.

How quickly can material be delivered to Thane?

Thane is about 220 km from the Satara factory, and normal delivery is 1 day after dispatch. Confirm the dispatch date and coordinate site readiness and erection separately with Kryzen Biotech’s construction team.

What should be included in a Thane polyhouse material kit?

A complete kit can include the GI structure, polyfilm, nets and fittings, with climate-relevant items such as GI gutter sheet, gutter-end funnels, side skirting apron, roll-up curtains, side insect net and an entry cabin. The online kit builder shows each item and quantity before booking.

Are there subsidies for a polyhouse or shade-net house in Thane?

MIDH/NHM support is stated as 50% of the cost norm up to 4,000 m² per beneficiary. For larger commercial projects, NHB guidelines have a separate route above 2,500 m², but In-Principle Approval is needed before starting and current norms should be confirmed with the state horticulture department.

Polyhouse material near Thane

Supplying a farm outside Thane? These nearby towns, with their own weather, are on the same delivery route.

TownFrom ThaneHottest monthRain a yearSuits
Polyhouse material in Bhiwandi~20 kmApr, 39°C2,490 mmNVPH + fan & pad
Polyhouse material in Kalyan-Dombivli~20 kmApr, 38°C2,509 mmNVPH + fan & pad
Polyhouse material in Mira-Bhayandar~20 kmApr, 39°C2,490 mmNVPH + fan & pad
Polyhouse material in Mumbai~20 kmApr, 38°C2,509 mmNVPH + fan & pad
Polyhouse material in Navi Mumbai~20 kmApr, 38°C2,509 mmNVPH + fan & pad
Polyhouse material in Ambernath~30 kmApr, 38°C2,509 mmNVPH + fan & pad

All towns: Polyhouse material by town

Sources

  1. Kryzen: Polyhouse construction in Thane
  2. Kryzen: Polyhouse farming in Thane
  3. NASA POWER monthly climate averages for Thane
  4. MIDH operational guidelines (protected cultivation)
  5. NHB commercial horticulture scheme guidelines
  6. Agmarknet daily prices (data.gov.in)
Build your kit