How it worksBuy individual items

NVPH materials · Madhya Pradesh

Naturally Ventilated Polyhouse Materials Seller in Pali, Madhya Pradesh

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

We sell the complete NVPH material kit to growers in Pali, Madhya Pradesh straight from our Satara factory: the GI frame cut and drilled to drawing, 250-micron diffused film, side insect net, curtains with gear units, gutters and every fitting. Below is the live list and price, and what Pali, Madhya Pradesh's weather changes in it.

Hottest month
May, ~42°C
Humid (75%+)
3 months
NVPH material, 1 acre
₹734/m²
Delivery
~5 days
Naturally ventilated polyhouse built with our material, like those we supply to Pali, Madhya Pradesh
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Pali, Madhya Pradesh?

In May the air is dry enough (26% humidity) for an NVPH to vent well, but afternoons of 42°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasurePali, Madhya PradeshMadhya Pradesh average (84 towns)What it means for the NVPH
Hottest-month high42°C (May)42.7°Cclose to the state average
Humidity in that month26%25%Dry air vents easily
Rain a year1,178 mm1,036 mm142 mm more than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Pali, Madhya Pradesh
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Pali, Madhya Pradesh

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Pali, Madhya Pradesh; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor Pali, Madhya PradeshWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 6.9 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 42°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepAugust brings ~323 mm; clean before July
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

Mandi price seasons around Pali, Madhya Pradesh

Across 12 mandis in nearby districts (Umariya, Shehdol, Katni, Satna), 8 polyhouse and nethouse crops trade regularly. Green peas has the most arrivals; Tomato has the widest price swing (422%), peaking in December.

CropMarketsAverageHighest monthLowest monthSwing
Green peas46₹3,337/qApr · ₹3,485Dec · ₹3,2099%
Tomato14₹1,497/qDec · ₹4,065Mar · ₹778422%
Green chilli6₹2,209/qMar · ₹2,705Nov · ₹1,65164%
Brinjal11₹1,309/qDec · ₹2,182May · ₹864153%
Papaya6₹1,540/qMay · ₹1,974Sep · ₹1,17868%
Bottle gourd10₹1,105/qSep · ₹1,320Apr · ₹89647%
Cauliflower9₹1,417/qDec · ₹2,333Oct · ₹995134%
Cucumber4₹1,162/qJun · ₹1,400Apr · ₹83867%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in nearby districts (Umariya, Shehdol, Katni, Satna). ₹ per quintal (100 kg).

A planting calendar built on local prices

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, green peas peaks in April; at about 60 days to first harvest, transplant in February.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
Green peasJan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec~60FebruaryDec
TomatoDec~75SeptemberMar
Green chilliFeb, Mar, Jun~75DecemberNov
BrinjalJan, Dec~60OctoberMay
Bottle gourdJun, Sep~55JulyApr
CauliflowerDec~75SeptemberOct
CucumberJun, Sep, Oct~40AprilApr
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Twelve months of weather in Pali, Madhya Pradesh

May is the hottest month, with afternoons around 42.1°C; January nights drop to about 8.8°C. August is the wettest (323 mm of 1,178 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan24.8°C8.8°C46%20 mm4.21.6
Feb29°C12.2°C41%21 mm5.11.8
Mar34.1°C17.1°C32%23 mm6.21.9
Apr39.5°C22.7°C24%20 mm6.92.2
May42.1°C26.8°C26%28 mm72.5
Jun37.5°C26.5°C53%164 mm5.53
Jul30.8°C23.8°C81%318 mm4.42.7
Aug29.3°C23.2°C87%323 mm4.12.3
Sep29.1°C22°C85%196 mm4.81.8
Oct28.2°C18.3°C74%51 mm51.3
Nov26.4°C13.7°C61%7 mm4.41.2
Dec24.5°C9.6°C54%7 mm41.4
NASA POWER long-term monthly averages for Pali, Madhya Pradesh (23.36, 81.04).

NVPH material list: 20 × 24 m in Pali, Madhya Pradesh

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Pali, Madhya Pradesh

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Pali, Madhya Pradesh and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Pali, Madhya Pradesh

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Pali, Madhya Pradesh's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~42°C highs
Strongest sun6.9 kWh/m²/day
Wettest month~323 mm
Humid (75%+)July–September
NASA POWER monthly averages for Pali, Madhya Pradesh.
  1. 1

    Before August

    Clear gutters and funnels, check the film for tears and tighten the GI springs. August brings about 323 mm, the heaviest rain of the year.

  2. 2

    July to September

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 42°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

Crops for an NVPH in Pali, Madhya Pradesh

Coloured capsicum for Pali, Madhya Pradesh

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 42°C.

Cucumber (parthenocarpic) for Pali, Madhya Pradesh

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Pali, Madhya Pradesh

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Pali, Madhya Pradesh?

Pali, Madhya Pradesh is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 42°C down to about 30°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~30°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in Pali, Madhya PradeshCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Pali, Madhya Pradesh

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

From our Satara factory to Pali, Madhya Pradesh is about 1,240 km by road, so a dispatched load normally arrives in about 5 days. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.

Pali within Madhya Pradesh

Pali is one of the cooler towns in Madhya Pradesh (66th hottest of 84), and in the middle for rain (24th). These are the larger towns we supply elsewhere in Madhya Pradesh.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Pali, Madhya Pradesh's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (42°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Pali, Madhya Pradesh?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Pali, Madhya Pradesh take?

About 1,240 km by road from our Satara factory, so usually in about 5 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

NVPH materials near Pali, Madhya Pradesh

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom Pali, Madhya PradeshHottest monthHumid monthsSuits
NVPH materials in Nowrozabad (Khodargama)~10 kmMay, 42°C3NVPH + fan & pad
NVPH materials in Shahdol~40 kmMay, 42°C3NVPH + fan & pad
NVPH materials in Umaria~40 kmMay, 42°C3NVPH + fan & pad
NVPH materials in Katni~110 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Pasan~120 kmMay, 41°C4NVPH + fan & pad
NVPH materials in Maihar~140 kmMay, 43°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Pali, Madhya Pradesh
  2. Kryzen: Polyhouse farming in Pali, Madhya Pradesh
  3. NASA POWER monthly climate averages for Pali, Madhya Pradesh
  4. NHB cost norms for protected cultivation
Build your kit