NVPH materials · Bidar district, Karnataka
Naturally Ventilated Polyhouse Materials Seller in Bidar
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
A naturally ventilated polyhouse (NVPH) needs no fans or pads: warm air leaves through the roof vent and fresh air comes in through roll-up side curtains. Whether that is enough depends on the weather, so this page works through Bidar's numbers — May afternoons of about 41°C, 859 mm of rain a year and humid air from July to October — and the NVPH material we would send for them.
- Hottest month
- May, ~41°C
- Humid (75%+)
- 4 months
- NVPH material, 1 acre
- ₹734/m²
- Delivery
- ~3 days

Does a naturally ventilated polyhouse suit Bidar?
In May the air is dry enough (34% humidity) for an NVPH to vent well, but afternoons of 41°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.
| Measure | Bidar | Karnataka average (81 towns) | What it means for the NVPH |
|---|---|---|---|
| Hottest-month high | 41°C (May) | 37.2°C | 3.8°C hotter than the state average |
| Humidity in that month | 34% | 46% | Dry in May, but humid from July to October |
| Rain a year | 859 mm | 1,156 mm | 297 mm less than the state average |
| Altitude | 614 m | 752 m | Nights stay mild |

Changes we would make for Bidar
Every NVPH kit starts from the same standard list. These are the changes we would suggest for Bidar; each one is a tick box on the kit builder's upgrades step, priced for your size.
| Part | Standard kit | For Bidar | Why |
|---|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Keep | Spreads April's 6.6 kWh/m²/day of sunlight evenly |
| Shade net | White 50% | Aluminium Shade Net (4 m) | Reflects heat back out at 41°C |
| Second net layer | None | Add (double layer) | Open or close it by the season with ropes and pulleys |
| Air circulation | Roof vent + curtains | Air Circulation Fan | 4 humid months: moving air keeps leaves dry |
| Doors | FRP (fibre) doors | Keep FRP | FRP lasts well in this climate |
| Gutters | GI gutter sheet + funnels | Keep | August brings ~203 mm; clean before July |
| Entry cabin | Optional | Include | A double door keeps whitefly and thrips out when people walk in |
Mandi price seasons around Bidar
Prices at the mandis in nearby districts (Medak, Sangareddy, Ranga Reddy, Kalaburagi) follow a clear yearly pattern. Tomato is the extreme case, from ₹915 per quintal in February up to ₹2,446 in June (167% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Green chilli | 32 | ₹3,682/q | Oct · ₹4,215 | Apr · ₹3,353 | 26% |
| Tomato | 32 | ₹1,543/q | Jun · ₹2,446 | Feb · ₹915 | 167% |
| Brinjal | 28 | ₹2,339/q | Nov · ₹3,043 | Apr · ₹1,874 | 62% |
| Beans | 22 | ₹3,412/q | Oct · ₹4,058 | Dec · ₹2,760 | 47% |
| Okra (bhindi) | 25 | ₹2,843/q | Nov · ₹3,214 | Apr · ₹2,303 | 40% |
| Cabbage | 24 | ₹1,393/q | Nov · ₹1,895 | Apr · ₹906 | 109% |
| Bitter gourd | 21 | ₹2,784/q | Jun · ₹3,251 | Dec · ₹2,421 | 34% |
| Cucumber | 19 | ₹1,633/q | Oct · ₹2,118 | Apr · ₹1,250 | 69% |
Timing your crop for the Bidar market
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, green chilli peaks in October; at about 75 days to first harvest, transplant in July.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Green chilli | Jan, Aug, Oct | ~75 | July | Apr |
| Tomato | Jun | ~75 | March | Feb |
| Brinjal | Nov | ~60 | September | Apr |
| Beans | Jun, Aug, Oct, Nov | ~50 | August | Dec |
| Okra (bhindi) | Jan, Feb, Mar, Jun, Oct, Nov, Dec | ~45 | September | Apr |
| Cabbage | Nov | ~75 | August | Apr |
| Bitter gourd | Jan, May, Jun, Jul | ~55 | April | Dec |
| Cucumber | Oct | ~40 | August | Apr |
Twelve months of weather in Bidar
May is the hottest month, with afternoons around 40.6°C; December nights drop to about 13.3°C. August is the wettest (203 mm of 859 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 30.2°C | 13.8°C | 44% | 7 mm | 5 | 2 |
| Feb | 33.8°C | 17°C | 34% | 5 mm | 5.8 | 2.1 |
| Mar | 37.2°C | 20.8°C | 30% | 19 mm | 6.3 | 2.1 |
| Apr | 39.8°C | 24.8°C | 31% | 23 mm | 6.7 | 2.2 |
| May | 40.6°C | 26.7°C | 34% | 31 mm | 6.6 | 3.2 |
| Jun | 33.7°C | 23.7°C | 63% | 122 mm | 5.4 | 4.1 |
| Jul | 30.5°C | 21.9°C | 75% | 189 mm | 4.5 | 4.2 |
| Aug | 29.2°C | 21.4°C | 81% | 203 mm | 4.5 | 3.5 |
| Sep | 28.9°C | 21°C | 83% | 166 mm | 4.8 | 2.3 |
| Oct | 28.8°C | 18.8°C | 77% | 79 mm | 5.1 | 1.8 |
| Nov | 28.5°C | 15.4°C | 68% | 13 mm | 4.9 | 1.8 |
| Dec | 28.7°C | 13.3°C | 55% | 2 mm | 4.8 | 1.8 |
NVPH material list: 20 × 24 m in Bidar
A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.
| Group | Item | Quantity | Weight |
|---|---|---|---|
| GI structure | Side Hockey (60X2.0X5500) | 22 nos | 378 kg |
| GI structure | Small Column (76X2.0X4500) | 18 nos | 305 kg |
| GI structure | Big Bottom (60X2.0X8000) | 8 nos | 200 kg |
| GI structure | Hockey Runner (42X2.0X4000) | 18 nos | 150 kg |
| GI structure | Big Arc (42X2.0X5200) | 12 nos | 130 kg |
| Film & nets | Polyfilm White Diffused 250 Micron (4.5 m) | 158 mtr | — |
| Film & nets | Polyfilm White Diffused 250 Micron (5.5 m) | 73 mtr | — |
| Film & nets | Side Insect Net (5.2 m) | 90 mtr | — |
| Film & nets | Side Skirting Apron (1.5 m) | 90 mtr | — |
| Film & nets | White Shade Net 50% | 80 mtr | — |
| Fittings & accessories | Aluminium Profile | 500 mtr | — |
| Fittings & accessories | GI Spring | 900 mtr | — |
| Fittings & accessories | Manual Gear Roll Up Curtain Unit | 4 nos | — |
| Fittings & accessories | Fibre Door | 2 nos | — |
| Fittings & accessories | F Bracket | 24 nos | — |
This week's NVPH material price for Bidar
| Size | Span × bay | Area | Material incl. GST | Per m² |
|---|---|---|---|---|
| Small | 20 × 24 m | 480 m² | ₹4,68,814 | ₹977 |
| Medium | 28 × 36 m | 1,008 m² | ₹8,59,963 | ₹853 |
| About 1 acre | 52 × 76 m | 3,952 m² | ₹28,99,897 | ₹734 |
Price your own size for Bidar
Choose span and bay and get the full list with quantities, weights and rates in a minute.
Running an NVPH through Bidar's year
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~41°C highs | ||||||||||||
| Strongest sun | 6.6 kWh/m²/day | ||||||||||||
| Wettest month | ~203 mm | ||||||||||||
| Humid (75%+) | July–October | ||||||||||||
| Nethouse season | October–February |
- 1
Before August
Clear gutters and funnels, check the film for tears and tighten the GI springs. August brings about 203 mm, the heaviest rain of the year.
- 2
July to October
Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.
- 3
May
Peak heat, about 41°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.
- 4
October to February
The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.
Crops for an NVPH in Bidar

Coloured capsicum
NVPHGrow under shade net through May, when highs reach 41°C.

Cucumber (parthenocarpic)
NVPHFast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose
NVPHCut flowers with year-round demand from city florists and events.
NVPH or fan & pad in Bidar?
Bidar is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 41°C down to about 30°C. Choose it only if you grow crops that need that cooling.
| Naturally ventilated | Fan & pad | |
|---|---|---|
| Cooling | Roof vent and side curtains (no power) | Exhaust fans and wet pads, ~30°C inside in May |
| Running cost | None for cooling | Electricity for fans and a pump |
| Material price, 1 acre | ₹28,99,897 (₹734/m²) | ₹32,48,775 (₹822/m²) |
| Suits in Bidar | Capsicum, cucumber, tomato, flowers | Leafy greens and crops needing tight control in summer |
Subsidy and delivery
NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.
Subsidy for a project in Bidar
Which scheme fits your size, a worked example and the steps to apply.
Bidar is roughly 490 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Bidar in about 3 days, carrying the invoice, the test reports and 100% invoice insurance.
Bidar within Karnataka
Bidar is one of the hotter towns in Karnataka (1st of 81 we cover), and in the middle for rain (35th). These are the larger towns we supply elsewhere in Karnataka.
- NVPH materials in Bengaluru
- NVPH materials in Hubli-Dharwad
- NVPH materials in Mysore
- NVPH materials in Kalaburagi
- NVPH materials in Mangaluru
- NVPH materials in Belagavi
- NVPH materials in Davanagere
- NVPH materials in Ballari
- NVPH materials in Vijayapura
- NVPH materials in Shivamogga
- NVPH materials in Tumkur
- NVPH materials in Raayachuru
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Is a naturally ventilated polyhouse enough for Bidar's summer?
For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (41°C), a fan and pad house cools better because the air is dry.
What does NVPH material cost in Bidar?
This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.
Which steel is used?
ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.
Do I need an entry cabin in Bidar?
We recommend it: 4 humid months favour whitefly and thrips, and a double-door cabin keeps them out.
Can I buy only the film or nets for an existing NVPH?
Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.
What is included in the NVPH material kit?
The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.
NVPH materials near Bidar
Neighbouring towns on the same delivery route, and how their summers compare.
| Town | From Bidar | Hottest month | Humid months | Suits |
|---|---|---|---|---|
| NVPH materials in Sadasivpet | ~70 km | May, 40°C | 4 | NVPH + fan & pad |
| NVPH materials in Udgir | ~90 km | May, 41°C | 4 | NVPH + fan & pad |
| NVPH materials in Sangareddy | ~90 km | May, 40°C | 4 | NVPH + fan & pad |
| NVPH materials in Medak | ~100 km | May, 40°C | 4 | NVPH + fan & pad |
| NVPH materials in Tandur | ~100 km | May, 40°C | 4 | NVPH + fan & pad |
| NVPH materials in Vikarabad | ~100 km | May, 40°C | 4 | NVPH + fan & pad |
