How it worksBuy individual items

NVPH materials · Bengaluru Urban district, Karnataka

Naturally Ventilated Polyhouse Material for Bengaluru

By Editorial Team, Kryzen Biotech · Updated 13 November 2026

A naturally ventilated polyhouse is a practical option in Bengaluru for capsicum, cucumber, tomato and flowers, provided its roof vent and side curtains are actively managed through the humid June–November period. April heat reaches 35.4°C, while January nights fall to 13.5°C, so the same house needs full airflow in hot hours and curtain control after sunset in the cooler months.

Hottest month
April, ~35°C
Humid (75%+)
6 months
NVPH material, 1 acre
₹734/m²
Delivery
~4 days
Naturally ventilated polyhouse built with our material, like those we supply to Bengaluru
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Bengaluru climate: where natural ventilation works, and where it needs help

Bengaluru’s 920 m elevation gives it a relatively mild daytime climate for much of the year. The hottest average afternoon is 35.4°C in April, following strong March and April sunshine of 6.6 kWh/m²/day. During these hot, fairly dry months, a naturally ventilated polyhouse can release hot air through the roof vent and draw replacement air through the side curtains. Curtains should be fully raised during the warmer part of the day, with the white 50% shade net used for sensitive crops rather than permanently closing the structure.

The harder operating period is June to November. Humidity is 75% or above through these six months, peaking at 81% in October. Rain is also concentrated in this period: September averages 152 mm and October 141 mm. Natural ventilation still removes warm air, but humid incoming air cannot dry foliage by itself. Keep the sides open whenever rain is not entering, avoid an over-dense canopy, and use air circulation fans in the morning to keep air moving around the crop.

Cool nights are the other consideration. January has the lowest average night temperature at 13.5°C and December averages 13.9°C. Lower the side curtains in the evening to retain the day’s warmth, then reopen them for light and air after morning conditions allow. Bengaluru receives 844 mm rain annually, lower than the Karnataka town average of 1,156 mm, but rainwater drainage and sound gutters remain necessary.

  • March–April: strongest sun and highest temperatures; prioritise open vents, open curtains and crop-appropriate shade.
  • June–November: high humidity calls for ventilation whenever rain permits and added internal air movement.
  • December–February: mild days but cool nights; make curtain closing part of the evening routine.
MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan28.7°C13.5°C63%2 mm5.52.4
Feb32°C15°C51%5 mm6.32.6
Mar35°C18.6°C44%17 mm6.62.6
Apr35.4°C21.3°C49%57 mm6.62.3
May32.8°C21.2°C64%110 mm6.22.6
Jun29°C19.6°C75%76 mm5.34.2
Jul28.1°C19°C77%100 mm4.84.5
Aug27.8°C18.8°C79%113 mm4.84
Sep27.6°C18.7°C80%152 mm5.32.8
Oct27.1°C18°C81%141 mm52
Nov26.3°C15.9°C79%56 mm4.72.3
Dec26.6°C13.9°C74%15 mm4.82.5
NASA POWER long-term monthly averages for Bengaluru.

A practical curtain, vent and shade routine through the year

Treat roof vents as the permanent outlet for rising warm air and side curtains as the daily control. In April, when average highs are about 35°C, open curtains fully and irrigate early in the day. The standard white diffused roof film spreads the available light, while the supplied white 50% shade net can reduce stress for crops that need it. Do not use shade as a substitute for airflow: blocked side openings retain heat and humidity.

From June through November, open side curtains whenever weather allows and close them only enough to stop rain from blowing onto plants. This is the season to inspect insect-net openings, curtain mechanisms and drainage regularly. Wider plant spacing is useful during the humid period because it allows leaves to dry more readily. In November to February, use the dry, mild conditions for the main planting programme and structural maintenance, while closing curtains in the evening on cooler nights.

The calendar below brings these periods together. It is based on long-term monthly averages, so daily rain and wind should decide the final curtain position on a particular day.

  • Open for maximum air exchange in hot daytime conditions.
  • Close only as needed during rain, then restore airflow when rain passes.
  • Lower curtains after sunset during cold nights; reopen for daytime light and ventilation.
MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~35°C highs
Strongest sun6.6 kWh/m²/day
Humid (75%+)June–November
Nethouse seasonNovember–February
NASA POWER monthly averages for Bengaluru.
  1. 1

    June to November

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  2. 2

    April

    Peak heat, about 35°C. Roll the curtains fully up, add shade only for sensitive crops, and irrigate early in the day.

  3. 3

    November to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

  4. 4

    Winter nights

    At about 920 m, nights turn cold. Lower the curtains in the evening to hold the day's warmth.

Material choices that suit this site

For Bengaluru, the standard 250-micron white diffused, UV-stabilised polyfilm is retained. It helps distribute the strong March sunlight of 6.6 kWh/m²/day rather than concentrating it on the crop. The standard white 50% shade net is also appropriate here; this climate does not call for a reflective net as the default choice.

The important upgrade is an air circulation fan. Bengaluru has six humid months, and these fans move air within the crop zone when outside humidity is already high. They support the roof vent and side curtains; they do not replace natural ventilation. A second net layer is optional and should be considered only for shade-loving crops.

Keep the GI gutter sheet and funnels because the site receives about 844 mm rain a year. FRP fibre doors remain the standard door choice. For a crop where people enter frequently, an entry cabin is worth including because its double-door arrangement helps reduce whitefly and thrips entering when someone walks in.

  • Keep: 250-micron white diffused roof film, white 50% shade net, FRP doors and gutters.
  • Add for the humid season: air circulation fans.
  • Consider by crop: second net layer for shade-loving crops and an entry cabin for better insect exclusion.
PartStandard kitFor BengaluruWhy
Roof film250-micron white diffused polyfilmKeepSpreads March's 6.6 kWh/m²/day of sunlight evenly
Shade netWhite 50%Keep white 50%Sunlight here does not call for a reflective net
Second net layerNoneOptionalOnly for shade-loving crops
Air circulationRoof vent + curtainsAir Circulation Fan6 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepAbout 844 mm a year
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What is in a Bengaluru NVPH material kit

Polyhouse Constructions supplies complete NVPH material kits from its Degaon factory on the Pune–Bangalore Highway at Wai, Satara. A kit combines the GI structure, polyfilm, nets and fittings; it is not only a pipe supply. The GI structure uses ISI-marked branded steel from Tata, Jindal and JSW, and the company provides a technical data sheet for every product, lab test certificates with dispatch and a 32-point QA check.

The table below shows major lines in a 20 × 24 m, 480 m² kit. Its listed structural components include side hockey pipes, columns, big bottoms, hockey runners and big arcs. On the covering and operating side, it includes white diffused polyfilm in two widths, side insect net, skirting apron, white 50% shade net, aluminium profile, GI spring, four manual gear roll-up curtain units and two fibre doors. The full kit has 67 items, so the online builder should be used to view the exact quantities for the selected span and bay.

The GI structure carries a 15-year manufacturing warranty. Polyfilm has a 2.5-year warranty and nets have a 3-year warranty.

  • Build a complete kit online to see every material line, quantity, weight and this week’s rate.
  • Buy individual items where a replacement or a specific addition is needed.
  • Kryzen Biotech’s construction team carries out erection; Polyhouse Constructions manufactures and supplies the material.
GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week’s material price, before freight and erection

The current material-only prices below are ex-factory and include GST. They are useful for comparing starting sizes, but freight to Bengaluru and erection are additional. A small 20 × 24 m house is 480 m² and is listed at ₹4,68,814. The 28 × 36 m, 1,008 m² option is ₹8,59,963, while the 52 × 76 m, 3,952 m² size—about 1 acre—is ₹28,99,897.

The cost per m² falls from ₹977 at 480 m² to ₹853 at 1,008 m² and ₹734 at 3,952 m² because gutters, end frames and doors are shared across more growing area. Rates follow weekly GI and plastic rates and are updated every Friday. Booking is with 5% advance and the remaining 95% is due before dispatch; a 5% bulk discount applies on 10 or more units of an item.

  • 20 × 24 m, 480 m²: ₹4,68,814 material including GST.
  • 28 × 36 m, 1,008 m²: ₹8,59,963 material including GST.
  • 52 × 76 m, 3,952 m²: ₹28,99,897 material including GST.
SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Bengaluru and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Bengaluru

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Crop planning around Bengaluru mandi seasons

For a long protected-cultivation crop, coloured capsicum is a direct NVPH fit. In Bengaluru district market data, capsicum averaged ₹4,032 per quintal across eight markets, with the high month recorded as November at ₹5,118 per quintal and the low month April at ₹3,195 per quintal. That November price period coincides with humid weather, making ventilation, crop spacing and air circulation especially important.

Parthenocarpic cucumber is a faster 3–4 month NVPH crop. Its district-market average was ₹1,751 per quintal across 11 markets, with the highest recorded month July at ₹2,426 and the lowest November at ₹1,182. Tomato is another covered-crop option; indeterminate varieties can be trained on strings for a long harvest. Its listed average was ₹2,088 per quintal across 12 markets, highest in December at ₹3,029 and lowest in March at ₹1,019.

Beans and green chilli show stronger average prices in the available market data—₹4,695 and ₹4,452 per quintal respectively—but crop choice should not be made from one price figure alone. Compare your planting date and expected harvest window with the seasonal high and low months, then consider crop duration, disease risk in the humid season and your own marketing route. The price table covers markets including Binny Mill (FF&V) Bengaluru APMC, Ramanagara APMC, Channapatana APMC, Kanakapura APMC and Doddaballa Pur APMC.

  • Capsicum: ₹4,032/q average; November high of ₹5,118/q.
  • Cucumber: ₹1,751/q average; July high of ₹2,426/q.
  • Tomato: ₹2,088/q average; December high of ₹3,029/q.
CropMarketsAverage modal priceHighest monthLowest month
Brinjal10₹2,503/qNov (₹4,306)Mar (₹1,596)
Beans10₹4,695/qMay (₹6,950)Feb (₹3,599)
Capsicum8₹4,032/qNov (₹5,118)Apr (₹3,195)
Tomato12₹2,088/qDec (₹3,029)Mar (₹1,019)
Cucumber11₹1,751/qJul (₹2,426)Nov (₹1,182)
Green chilli10₹4,452/qFeb (₹5,341)May (₹3,852)
Bitter gourd9₹2,872/qNov (₹3,323)Mar (₹2,202)
Cauliflower10₹2,329/qNov (₹3,124)Mar (₹1,569)
Ridge gourd10₹2,836/qNov (₹3,433)Mar (₹2,273)
Cabbage10₹1,212/qNov (₹1,673)Mar (₹740)
Agmarknet daily prices via data.gov.in, last two years, markets in Bengaluru Urban district. ₹ per quintal.

NVPH or fan and pad for a Bengaluru project?

For capsicum, cucumber, tomato and flowers, an NVPH is the lower-material-cost option and has no cooling power cost. Cooling comes from the roof vent and side curtains. At about 1 acre, the listed NVPH material price is ₹28,99,897, or ₹734/m². Its limitation is that it cannot lower incoming air temperature below outdoor conditions in April, and humid monsoon air limits leaf drying.

A fan-and-pad house uses exhaust fans and wet pads. In Bengaluru April conditions, it can maintain about 29°C inside, versus an April average outdoor high of 35.4°C. It is therefore the better fit for leafy greens and crops requiring tighter summer control, but it needs electricity for fans and a pump. The listed 1-acre fan-and-pad material price is ₹32,48,775, or ₹822/m².

For a farmer seeking a robust first protected structure for fruiting vegetables, the naturally ventilated option can suit Bengaluru when the humid-season fan upgrade and careful curtain operation are included. Select fan and pad where the crop plan specifically needs the tighter April temperature control and the running electricity requirement is acceptable.

  • Choose NVPH for no cooling electricity cost and crops suited to natural airflow.
  • Choose fan and pad for approximately 29°C inside in April and tighter summer control.
  • Do not compare only initial material cost; account for the crop’s temperature requirement and fan-and-pump electricity.
Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~29°C inside in April
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in BengaluruCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Supply, engineering and construction for Bengaluru

There is no Polyhouse Constructions office in Bengaluru. Material is manufactured at the Satara factory and Bengaluru is 880 km from it; delivery is expected in 4 days after dispatch. This separates material supply from site work clearly: Polyhouse Constructions is a venture of Kryzen Biotech Pvt Ltd and manufactures the protected-cultivation structure and kit, while Kryzen Biotech’s construction team carries out erection.

The design should be finalised around the crop, span, bay and Bengaluru weather rather than selected as a standard frame without review. In-house engineering and manufacturing mean the material is cut and drilled to the drawing. Each dispatch is supported by the stated QA process, lab test certificate and product technical sheets. This matters for a house that must operate with open vents during hot weather, rain management in September and October, and curtains lowered on cold nights.

  • Factory supply: Degaon, Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra.
  • Bengaluru delivery timing: 4 days after dispatch.
  • Erection: Kryzen Biotech construction team.
What you getPolyhouse ConstructionTypical local fabricator
Experience30 years of collective experience in greenhouse engineeringOften a small crew learning on the job
Technical know-howStrong technical understanding: structure planned for your climate and cropUsually repeats one standard design
Warranty15-year manufacturing warrantyRarely a written warranty
EngineeringIn-house engineering teamNo design or load checks
ManufacturingIn-house manufacturing, cut and drilled to drawingBuys pipes from traders, cuts on site
Quality checks32-point QA checklist for every partVisual check at best
Lab certificateLab test certificate with every dispatchNot provided
Technical sheetTechnical data sheet for every productNot available
Material matchZero material mismatch: every part counted per designShort or excess material is common
Raw materialBranded steel from Tata, Jindal and JSWUnbranded or mixed sources
PriceLowest cost across India, with real-time price benefits from weekly ratesFixed quote; rate drops are not passed on
BackingBacked by industry leader Kryzen BiotechSingle-owner workshop

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Will a naturally ventilated polyhouse be cool enough in Bengaluru in April?

April is Bengaluru’s hottest month at an average 35.4°C high, so keep roof vents and side curtains open through hot hours. For crops needing tighter summer control, fan and pad can maintain about 29°C inside in April; NVPH relies on natural airflow and shade management.

Do I need air circulation fans in an NVPH here?

They are recommended for Bengaluru because humidity is 75% or more from June through November. Fans move air within the crop canopy and help keep leaves dry, while side curtains and roof vents continue to provide the main air exchange.

What does the 480 m² naturally ventilated kit cost?

The listed 20 × 24 m, 480 m² NVPH material kit costs ₹4,68,814 including GST, or ₹977/m². It is an ex-factory material price; freight to Bengaluru and erection are extra.

Which crops have useful Bengaluru mandi price seasons for an NVPH?

Capsicum recorded its highest listed month in November at ₹5,118/q, cucumber in July at ₹2,426/q, and tomato in December at ₹3,029/q. These are historical modal-price observations for district markets, so use them to plan harvest windows rather than as a guaranteed sale price.

How are material and construction arranged for Bengaluru?

Polyhouse Constructions manufactures the kit at Degaon in Satara and supplies Bengaluru, with delivery expected in 4 days after dispatch. Kryzen Biotech’s construction team handles erection; Polyhouse Constructions does not have an office in Bengaluru.

NVPH materials near Bengaluru

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom BengaluruHottest monthHumid monthsSuits
NVPH materials in Nelamangala~30 kmApr, 35°C6NVPH + fan & pad
NVPH materials in Magadi~50 kmApr, 35°C6NVPH + fan & pad
NVPH materials in Malur~50 kmApr, 35°C5NVPH
NVPH materials in Hosur~50 kmApr, 35°C5NVPH + fan & pad
NVPH materials in Ramanagaram~60 kmApr, 36°C6NVPH + fan & pad
NVPH materials in Sidlaghatta~70 kmApr, 36°C5NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Bengaluru
  2. Kryzen: Polyhouse farming in Bengaluru
  3. NASA POWER monthly climate averages for Bengaluru
  4. NHB cost norms for protected cultivation
  5. Agmarknet daily prices (data.gov.in)
Build your kit