How it worksBuy individual items

NVPH materials · Ranga Reddy district, Telangana

Naturally Ventilated Polyhouse Materials Seller in Tandur

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Tandur, Ranga Reddy district, the frame and film are only half the decision; the other half is how the house breathes in May. Here is the NVPH kit we supply, priced this week, with the choices we would make for Tandur.

Hottest month
May, ~40°C
Humid (75%+)
4 months
NVPH material, 1 acre
₹734/m²
Delivery
~3 days
Naturally ventilated polyhouse built with our material, like those we supply to Tandur
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Tandur?

In May the air is dry enough (36% humidity) for an NVPH to vent well, but afternoons of 40°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureTandurTelangana average (40 towns)What it means for the NVPH
Hottest-month high40°C (May)41.3°C1.3°C cooler than the state average
Humidity in that month36%36%Dry in May, but humid from July to October
Rain a year833 mm894 mmclose to the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Tandur
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Tandur

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Tandur; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor TandurWhy
Roof film250-micron white diffused polyfilmKeepSpreads April's 6.6 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 40°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsAir Circulation Fan4 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepAbout 833 mm a year
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What protected crops fetch at mandis near Tandur

We averaged two years of daily Agmarknet prices from 12 markets in Ranga Reddy district for crops that are grown under cover. Tomato swings the most: about ₹2,406 per quintal in June against ₹1,001 in February, a 140% difference. Okra (bhindi) is the steadiest, which makes it a safer second crop.

CropMarketsAverageHighest monthLowest monthSwing
Tomato21₹1,631/qJun · ₹2,406Feb · ₹1,001140%
Brinjal17₹2,417/qNov · ₹3,165Apr · ₹2,13948%
Green chilli21₹4,297/qJan · ₹5,019Jun · ₹3,65537%
Cabbage16₹1,480/qNov · ₹2,012Apr · ₹1,06289%
Beans11₹3,779/qNov · ₹4,453Jan · ₹2,86356%
Okra (bhindi)15₹3,165/qNov · ₹3,577Sep · ₹2,77929%
Cauliflower12₹1,838/qJul · ₹2,078Dec · ₹1,59630%
Bitter gourd12₹3,027/qJan · ₹3,604Sep · ₹2,68234%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Ranga Reddy district. ₹ per quintal (100 kg).

Timing your crop for the Tandur market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in June; at about 75 days to first harvest, transplant in March.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoJun, Nov~75MarchFeb
BrinjalNov~60SeptemberApr
Green chilliJan, Oct~75OctoberJun
CabbageNov, Dec~75AugustApr
BeansMay, Jun, Aug, Sep, Oct, Nov~50SeptemberJan
Okra (bhindi)Jan, Feb, Mar, Nov, Dec~45SeptemberSep
CauliflowerMay, Jun, Jul, Aug, Sep, Oct~75AprilDec
Bitter gourdJan, Mar~55NovemberSep
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Tandur's weather, month by month

May is the hottest month, with afternoons around 40.1°C; December nights drop to about 14.5°C. August is the wettest (166 mm of 779 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan31.2°C14.9°C46%5 mm52.2
Feb34.4°C17.5°C38%4 mm5.82.2
Mar37.7°C21.2°C33%19 mm6.32.2
Apr39.7°C25°C35%26 mm6.72.2
May40.1°C26.6°C38%40 mm6.63
Jun33.4°C23.5°C65%105 mm5.44.1
Jul31°C22.2°C74%153 mm4.54.3
Aug29.9°C21.6°C79%166 mm4.53.7
Sep29.4°C21.4°C81%162 mm4.82.3
Oct29.5°C19.4°C77%83 mm5.11.9
Nov29.6°C16.5°C67%14 mm4.92.1
Dec30°C14.5°C56%2 mm4.82.1
NASA POWER long-term monthly averages for Tandur (17.25, 77.58).

NVPH material list: 28 × 36 m in Tandur

A 28 m wide, 36 m long naturally ventilated polyhouse (1,008 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSmall Column (76X2.0X4500)36 nos609 kg
GI structureSide Hockey (60X2.0X5500)32 nos549 kg
GI structureBig Bottom (60X2.0X8000)21 nos524 kg
GI structureBig Arc (42X2.0X5200)27 nos292 kg
GI structureGI Gutter Sheet70 mtr—
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)255 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)138 mtr—
Film & netsSide Insect Net (5.2 m)130 mtr—
Film & netsSide Skirting Apron (1.5 m)130 mtr—
Film & netsWhite Shade Net 50%192 mtr—
Fittings & accessoriesAluminium Profile836 mtr—
Fittings & accessoriesGI Spring1,425 mtr—
Fittings & accessoriesF Bracket54 nos—
Fittings & accessoriesClamps 60 mm Half358 nos—
Fittings & accessoriesSelf Drilling Screw1,881 nos—
The largest items of a 28 × 36 m kit (67 items in all, about 4.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Tandur

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Tandur and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Tandur

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Tandur's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~40°C highs
Strongest sun6.6 kWh/m²/day
Humid (75%+)July–October
Nethouse seasonOctober–February
NASA POWER monthly averages for Tandur.
  1. 1

    July to October

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  2. 2

    May

    Peak heat, about 40°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  3. 3

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Tandur

Coloured capsicum for Tandur

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 40°C.

Cucumber (parthenocarpic) for Tandur

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Tandur

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Tandur?

Tandur is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 40°C down to about 30°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~30°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in TandurCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Tandur

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

We dispatch from Degaon near Satara, about 510 km from Tandur by road. Expect the material in about 3 days after dispatch; share the farm PIN code and the access road so we send a vehicle that can reach the site.

Tandur within Telangana

Tandur is one of the cooler towns in Telangana (37th hottest of 40), and in the middle for rain (26th). These are the larger towns we supply elsewhere in Telangana.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Tandur's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (40°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Tandur?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

How long does delivery to Tandur take?

About 510 km by road from our Satara factory, so usually in about 3 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Tandur?

We recommend it: 4 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

NVPH materials near Tandur

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom TandurHottest monthHumid monthsSuits
NVPH materials in Sedam~40 kmMay, 40°C3NVPH + fan & pad
NVPH materials in Vikarabad~50 kmMay, 40°C4NVPH + fan & pad
NVPH materials in Narayanpet~70 kmMay, 40°C3NVPH + fan & pad
NVPH materials in Sadasivpet~70 kmMay, 40°C4NVPH + fan & pad
NVPH materials in Shahabad~90 kmMay, 41°C3NVPH + fan & pad
NVPH materials in Wadi~90 kmMay, 41°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Tandur
  2. Kryzen: Polyhouse farming in Tandur
  3. NASA POWER monthly climate averages for Tandur
  4. NHB cost norms for protected cultivation
Build your kit