How it worksBuy individual items

NVPH materials · Medak district, Telangana

Naturally Ventilated Polyhouse Materials Seller in Medak

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

A naturally ventilated polyhouse (NVPH) needs no fans or pads: warm air leaves through the roof vent and fresh air comes in through roll-up side curtains. Whether that is enough depends on the weather, so this page works through Medak's numbers — May afternoons of about 40°C, 846 mm of rain a year and humid air from July to October — and the NVPH material we would send for them.

Hottest month
May, ~40°C
Humid (75%+)
4 months
NVPH material, 1 acre
₹734/m²
Delivery
~3 days
Naturally ventilated polyhouse built with our material, like those we supply to Medak
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Medak?

In May the air is dry enough (34% humidity) for an NVPH to vent well, but afternoons of 40°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureMedakTelangana average (40 towns)What it means for the NVPH
Hottest-month high40°C (May)41.3°C1.3°C cooler than the state average
Humidity in that month34%36%Dry in May, but humid from July to October
Rain a year846 mm894 mmclose to the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Medak
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Medak

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Medak; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor MedakWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 6.8 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 40°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsAir Circulation Fan4 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepAugust brings ~204 mm; clean before July
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What protected crops fetch at mandis near Medak

Across 5 mandis in Medak district, 8 polyhouse and nethouse crops trade regularly. Okra (bhindi) has the most arrivals; Cucumber has the widest price swing (297%), peaking in June.

CropMarketsAverageHighest monthLowest monthSwing
Okra (bhindi)5₹2,125/qJun · ₹2,668Dec · ₹1,58069%
Brinjal5₹1,433/qJun · ₹1,856Mar · ₹737152%
Bitter gourd5₹2,187/qJun · ₹3,338Dec · ₹1,485125%
Green chilli5₹2,177/qJun · ₹3,011Mar · ₹1,397116%
Cucumber4₹885/qJun · ₹1,599Nov · ₹403297%
Cabbage5₹1,002/qJun · ₹1,848Apr · ₹624196%
Bottle gourd4₹664/qJun · ₹904Dec · ₹55862%
Ridge gourd2₹2,482/qJan · ₹3,009May · ₹2,05347%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Medak district. ₹ per quintal (100 kg).

Timing your crop for the Medak market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, okra (bhindi) peaks in June; at about 45 days to first harvest, transplant in April.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
Okra (bhindi)Jun, Jul~45AprilDec
BrinjalMay, Jun, Jul, Oct, Nov~60AprilMar
Bitter gourdJun~55AprilDec
Green chilliMay, Jun~75MarchMar
CucumberJun~40AprilNov
CabbageJun~75MarchApr
Bottle gourdJun~55AprilDec
Ridge gourdJan, Jul~50NovemberMay
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Twelve months of weather in Medak

May is the hottest month, with afternoons around 40.4°C; December nights drop to about 13.7°C. August is the wettest (204 mm of 846 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan29.8°C14.2°C46%8 mm4.82
Feb33.5°C17.2°C37%6 mm5.72.2
Mar37.1°C21.1°C32%20 mm6.22.2
Apr39.6°C24.9°C33%23 mm6.82.2
May40.4°C27.1°C34%26 mm6.83.1
Jun33.8°C24.2°C62%116 mm5.44
Jul30.5°C22.3°C75%190 mm4.54.1
Aug29°C21.7°C82%204 mm4.43.4
Sep28.8°C21.4°C84%158 mm4.92.3
Oct28.8°C19.2°C77%81 mm5.11.8
Nov28.4°C15.9°C69%12 mm4.91.8
Dec28.3°C13.7°C57%2 mm4.61.8
NASA POWER long-term monthly averages for Medak (18.05, 78.26).

NVPH material list: 20 × 24 m in Medak

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Medak

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Medak and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Medak

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Medak's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~40°C highs
Strongest sun6.8 kWh/m²/day
Wettest month~204 mm
Humid (75%+)July–October
Nethouse seasonOctober–February
NASA POWER monthly averages for Medak.
  1. 1

    Before August

    Clear gutters and funnels, check the film for tears and tighten the GI springs. August brings about 204 mm, the heaviest rain of the year.

  2. 2

    July to October

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 40°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Medak

Coloured capsicum for Medak

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 40°C.

Cucumber (parthenocarpic) for Medak

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Medak

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Medak?

Medak is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 40°C down to about 30°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~30°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in MedakCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Medak

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

We dispatch from Degaon near Satara, about 590 km from Medak by road. Expect the material in about 3 days after dispatch; share the farm PIN code and the access road so we send a vehicle that can reach the site.

Medak and the rest of Medak district

Medak is one of the cooler towns in Telangana (32nd hottest of 40), and in the middle for rain (25th). We also supply 3 other towns in Medak district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Medak's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (40°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Medak?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Medak?

We recommend it: 4 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

NVPH materials near Medak

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom MedakHottest monthHumid monthsSuits
NVPH materials in Kamareddy~40 kmMay, 42°C4NVPH + fan & pad
NVPH materials in Sadasivpet~70 kmMay, 40°C4NVPH + fan & pad
NVPH materials in Sangareddy~70 kmMay, 40°C4NVPH + fan & pad
NVPH materials in Siddipet~80 kmMay, 41°C4NVPH + fan & pad
NVPH materials in Nizamabad~90 kmMay, 42°C4NVPH + fan & pad
NVPH materials in Secunderabad~90 kmMay, 40°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Medak
  2. Kryzen: Polyhouse farming in Medak
  3. NASA POWER monthly climate averages for Medak
  4. NHB cost norms for protected cultivation
Build your kit