Specifications glossary
Technical terms that you need to know
By Editorial Team, Kryzen Biotech
- 11Exhaust fan
- A large fan in the wall opposite the cooling pads. It pulls hot air out, which draws cooler air in through the wet pads.
- 12Fan and pad polyhouse
- A closed polyhouse cooled by exhaust fans and wet cellulose pads. It works best in hot, dry weather, where evaporation can bring the inside several degrees below the outside.
- 13FRP(Fibre-reinforced plastic)
- Plastic strengthened with glass fibres. It is light, strong and never rusts, so it is used for parts that stay wet or in contact with soil.
- 14Gauge (wire)
- A number that describes wire thickness: the higher the gauge, the thinner the wire. 12 gauge wire is about 2.64 mm thick.
- 15GI (galvanised iron)
- Steel that has been coated with zinc so it does not rust. Almost every pipe, clamp and gutter in a polyhouse is GI. The steel carries the load; the zinc layer protects it from rain, fertiliser and humid air.
- 16GST(Goods and Services Tax)
- The tax on goods and services in India. Within one state it is split into CGST and SGST; between states it is charged as IGST. The rate depends on the HSN code of each item.
- 17Gutter
- A GI channel running along the top of the columns between two spans. It collects rainwater from both roofs and carries it to the funnels at the ends.
- 18HDPE(High-density polyethylene)
- A strong, stiff plastic used for shade nets and insect nets. It resists chemicals and, with UV stabilisers, lasts several seasons in the sun.
- 19Hockey area
- A 2 m margin left on each side between the outer frame and the growing beds. It is used for walking, drainage and working space.
- 20Hot-dip galvanising
- Dipping finished steel into molten zinc at about 450°C. The zinc covers the steel inside and out, including cut ends and welds, and bonds into the surface. It gives the thickest and longest-lasting rust protection.
Page 2 of 5 · 42 terms
See these specifications on every product
Browse products →