Equipment · Surat district, Gujarat
Protected cultivation equipment for Surat farms
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
For Surat, protected-cultivation equipment has to manage two very different pressures: dry, hot April–May afternoons and extremely wet, humid weather from July to September. Polyhouse Constructions supplies complete material kits and individual fan, pad, film, net, gutter, curtain and fitting items from its Satara factory; erection is carried out by Kryzen Biotech’s construction team.
- Pad cooling
- Works: ~33°C inside
- Humid months
- 3
- Shading need
- High
- Delivery
- ~3 days

Start with Surat’s actual weather, not a standard kit
Surat reaches an average afternoon high of 39.8°C in April, while May has the strongest sun at 7.3 kWh/m²/day. That makes heat removal, shading and the ability to open the structure important before the monsoon. April is nearly dry at 2 mm rain and May receives 6 mm, so this is the period when a closed polyfilm house can build up heat quickly.
The monsoon changes the requirement completely. Surat receives about 1,695 mm rain in a year, with 572 mm in July, 437 mm in August and 270 mm in September. Relative humidity is 87% in July, 89% in August and 86% in September. Equipment should therefore help remove humid air, take roof water away cleanly and keep insect-net and curtain openings usable. January’s average low is 14.5°C, so the local priority table identifies no extra night equipment need.
The month-by-month table below is useful when deciding crop timing and when to service fans, curtains, nets and drainage rather than relying on annual averages.
- April: 39.8°C average high; plan cooling before this peak.
- May: 7.3 kWh/m²/day sun; use effective shading where the crop needs it.
- July–September: the humid period; prioritise air movement, rain drainage and insect-net condition.
- October–February: identified as Surat’s nethouse season.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 31.4°C | 14.5°C | 36% | 1 mm | 4.7 | 2 |
| Feb | 33.9°C | 16.5°C | 37% | 3 mm | 5.6 | 2 |
| Mar | 37.3°C | 19.9°C | 39% | 2 mm | 6.5 | 2.2 |
| Apr | 39.8°C | 23.2°C | 48% | 2 mm | 7.2 | 2.6 |
| May | 38.9°C | 25.7°C | 56% | 6 mm | 7.3 | 3.8 |
| Jun | 33.5°C | 26.4°C | 74% | 347 mm | 5.7 | 4.2 |
| Jul | 29.6°C | 25.2°C | 87% | 572 mm | 4.3 | 4.2 |
| Aug | 28.9°C | 24.4°C | 89% | 437 mm | 4.2 | 3.6 |
| Sep | 29.9°C | 23.8°C | 86% | 270 mm | 4.9 | 2.2 |
| Oct | 32.2°C | 21.3°C | 70% | 43 mm | 5.4 | 1.5 |
| Nov | 32.9°C | 18.1°C | 55% | 9 mm | 4.7 | 1.7 |
| Dec | 31.9°C | 15.6°C | 42% | 3 mm | 4.3 | 1.9 |
Equipment priorities for a Surat polyhouse or nethouse
A naturally ventilated polyhouse (NVPH) can use roof ventilation, roll-up curtains and side insect net to exchange air. For the hottest months, shade selection matters: white 50% shade net is ₹27 per metre + GST, while the reflective aluminium shade net is ₹315 per metre + GST. The 250-micron white diffused polyfilm is UV stabilised and priced at ₹254 per metre + GST for the 4.5 m product.
For monsoon operation, specify rain-handling parts rather than treating them as add-ons. A GI gutter sheet is ₹335 per metre + GST, a gutter funnel is ₹1,350 per piece + GST, and a 1.5 m side skirting apron is ₹64 per metre + GST. Wide gutters, funnels and the skirting apron are particularly relevant where July rainfall is about 572 mm.
Curtains and insect exclusion are part of ventilation, not merely finishing items. A manual gear roll-up curtain unit costs ₹1,050 per piece + GST; curtain pipe is ₹758 per piece + GST; and 5.2 m side insect net is ₹221 per metre + GST. An air-circulation fan, an optional addition in NVPH and fan-and-pad houses, is ₹8,999 per piece + GST. These prices are product rates stated before GST; rates follow weekly GI and plastic rates updated every Friday.
- Cooling: exhaust fans and cellulose pads where active cooling is required.
- Air movement: roof vent, curtains and optional circulation fans, especially in the July–September humidity.
- Shading: aluminium or double-layer net is identified for Surat’s May sun.
- Rain: gutters, funnels and side skirting apron should be included in the material list.
| Need | For Surat | Why |
|---|---|---|
| Cooling | Exhaust fans + cellulose pads | Pads bring 40°C to ~33°C in April |
| Air movement | Roof vent + curtains | Humid from July to September |
| Shading | Aluminium or double-layer net | Sun peaks at 7.3 kWh/m² in May |
| Rain | Wide gutters, funnels, skirting apron | July: ~572 mm |
| Nights | No extra need | — |
Does fan-and-pad cooling make sense here?
Fan-and-pad cooling works in Surat. The climate guidance estimates that pads can bring an approximately 40°C April condition down to about 33°C inside. This gives a practical reason to consider it for a crop and production schedule that needs more controlled summer temperatures than a naturally ventilated house can offer.
Whether it pays for an individual farm is a crop, market and operating-cost decision, so it should not be assumed only from the temperature reduction. Compare the planned crop window, electricity and water requirements, and the market route with the added equipment cost. Surat district market data, for example, records capsicum across two markets at an average modal price of ₹3,250/q, with July the highest month at ₹4,441; it is a reference for seasonal planning, not a return guarantee.
For scale context, the sizing figures below describe a 52 × 76 m fan-and-pad house: 3,952 m², 12 exhaust fans and 82 cellulose pads, with material including GST shown as ₹32,48,775. It is an example, not a substitute for a design based on the chosen structure and crop.
- Exhaust fan: ₹22,700 per piece + GST.
- Cellulose pad, 600X150X1800: ₹2,616 per piece + GST.
- Aluminium pad frame, 150 mm: ₹815 per metre + GST.
- Fan-and-pad is a system choice; it is not used in an NVPH or nethouse as a standard item.
- Fan & pad house, 52 × 76 m
- 3,952 m²
- Exhaust fans
- 12 nos
- Cellulose pads
- 82 nos
- Material incl. GST
- ₹32,48,775
Match the structure to crop window and selling season
An NVPH is the appropriate route when the plan calls for polyfilm with natural ventilation, roll-up curtains and side insect net. A fan-and-pad polyhouse uses polyfilm, shade net, GI gutters, exhaust fans and cellulose pads. Square nethouses use shade net and can use side insect net, while curved nethouses use shade net; both suit a more open protected system than a polyfilm-covered house.
Surat’s October–February nethouse season coincides with lower rainfall: 43 mm in October, 9 mm in November, 3 mm in December, 1 mm in January and 3 mm in February. Market timing may also matter. Surat district data shows bhindi’s highest reported month as December at ₹5,067/q, brinjal’s as November at ₹4,457/q, and bitter gourd’s as January at ₹4,494/q. These are historical modal-price observations, not assured future prices.
The kit should be built item by item for the selected system. At polyhouseconstructions.com, a farmer can build a complete kit online and see every item, quantity and that week’s rate. Material includes GI structure, polyfilm, nets and fittings; individual items are also available.
- GI structure: ISI-marked branded steel from Tata, Jindal and JSW.
- Fittings include aluminium profile at ₹27 per metre + GST and GI spring at ₹6 per metre + GST.
- A 60 mm full clamp is ₹17 per piece + GST; check required quantities against the drawing rather than buying loose fittings blindly.
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
A Surat care calendar for cooling, rain and ventilation equipment
Service work should follow Surat’s weather rather than be left until crop stress appears. Before April’s 39.8°C average high, prepare the active cooling equipment. Before the July rain peak, attend to drainage, film and the lower side of the structure. During the wet, humid quarter, keep air moving and inspect insect barriers regularly.
After the monsoon, use the relatively drier October–February period for fastener and covering checks and for ordering items that will be needed before the following heat season. This approach reduces the risk of discovering a blocked gutter, torn net or slipping curtain only when weather conditions are already demanding.
- Before April: wash or replace cellulose pads; clean the pad gutter and filter; check every exhaust-fan belt and shutter.
- Before July: clear gutters and funnels, re-seat the side skirting apron and check film tension.
- July–September: run air-circulation fans in mornings, grease curtain gear units and look for tears in insect net.
- October–February: tighten clamps and bolts, check GI springs in aluminium profiles, and arrange replacement film or net before the next season.
- 1
Before April
Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 40°C peak.
- 2
Before July
Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 572 mm.
- 3
July to September
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 4
October to February
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Material checks and written warranty matter in humid conditions
Humidity and long monsoon exposure make material verification important. Polyhouse Constructions is a manufacturer of protected-cultivation structures and material, a venture of Kryzen Biotech Pvt Ltd, with in-house engineering and manufacturing. Every dispatch has a lab test certificate, and a technical data sheet is provided for every product. The process includes a 32-point QA checklist for every part.
The available quality checks include a third-party tensile test for GI pipe steel strength, a salt-spray test for corrosion resistance, and chemical analysis through a spectrometer check of steel composition. Ask to match the dispatch material and quantities to the drawing, especially for profiles, springs, clamps and curtain parts.
The written warranties are 15 years on the GI structure, 2.5 years on polyfilm and 3 years on shade and insect nets. Construction and erection are done by Kryzen Biotech’s construction team, not by an office located in Surat.
- Factory supply location: Degaon, Pune–Bangalore Highway, Tal. Wai, Satara, Maharashtra.
- Surat is 490 km from the factory; delivery is stated as 3 days after dispatch.
- The Experience Center is at Mahalunge, Pune.

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Surat.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Ordering complete kits, repairs and future spares
A farm does not always need a new structure. Exhaust fans, pads, nets, curtains, gutters, doors and fittings can be bought individually for repairs or extensions, at the weekly rate. This is useful after a monsoon inspection when only a few gutters, springs, a curtain component or a section of insect net needs replacement.
For a new kit, booking is with 5% advance and 95% before dispatch. There is a 5% bulk discount on 10+ units of an item. Weekly pricing means the rate should be checked when the order is finalised, particularly for GI and plastic items.
Surat farmers can also plan transport and installation around supply from Satara rather than expecting a town office. The material is supplied from the factory, while the construction work is handled by Kryzen Biotech’s team.
- Order a complete kit for NVPH, fan-and-pad polyhouse, square nethouse or curved nethouse.
- Order individual material for repairs, replacements and extensions.
- Check the online kit item list, quantities and current week’s rate before booking.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Which protected-cultivation equipment is most important for Surat’s April–May heat?
For Surat, the key choices are cooling, air movement and shading. April averages 39.8°C in the afternoon and May sun reaches 7.3 kWh/m²/day; the recommended priorities are exhaust fans with cellulose pads for active cooling and aluminium or double-layer net for shading.
Will a fan-and-pad polyhouse cool a Surat farm enough?
The Surat climate guidance says pad cooling works and can bring an approximately 40°C April condition down to about 33°C inside. Whether it is financially suitable depends on the crop, selling period and operating requirements, so temperature benefit alone should not be treated as a payback calculation.
What rain equipment should I include for Surat?
Include GI gutters, gutter funnels and a side skirting apron in a polyfilm house plan. July averages about 572 mm rain, followed by 437 mm in August, so drainage and film tension should be checked before the monsoon.
Can I buy only replacement net, fan or fittings in Surat?
Yes. Individual fans, pads, nets and fittings are sold for repairs and extensions at the weekly rate, rather than only as complete kits. Prices are updated with weekly GI and plastic rates every Friday.
What warranty and quality documents come with the material?
The GI structure has a 15-year manufacturing warranty, polyfilm has a 2.5-year warranty, and shade and insect nets have a 3-year warranty. Every dispatch includes a lab test certificate, and each product has a technical data sheet; the manufacturer also uses a 32-point QA checklist.
Equipment supply near Surat
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Surat | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Navsari | ~40 km | Works (~33°C) | 3 | Apr, 40°C |
| Equipment supplier in Ankleshwar | ~70 km | Works (~32°C) | 3 | Apr, 41°C |
| Equipment supplier in Bharuch | ~70 km | Works (~32°C) | 3 | Apr, 41°C |
| Equipment supplier in Vyara | ~80 km | Works (~33°C) | 3 | Apr, 40°C |
| Equipment supplier in Valsad | ~90 km | Works (~32°C) | 4 | Apr, 39°C |
| Equipment supplier in Pardi | ~100 km | Works (~32°C) | 4 | Apr, 39°C |
