Equipment · Valsad district, Gujarat
Protected Cultivation Equipment Supplier in Pardi
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
Looking for a protected cultivation equipment supplier in Pardi? We manufacture GI structures and supply the equipment that goes in them, priced at weekly factory rates. With April highs near 39°C, humid air from June to September and 2,021 mm of rain a year, here is what matters most in Pardi, and what each item costs this week.
- Pad cooling
- Works: ~32°C inside
- Humid months
- 4
- Shading need
- High
- Delivery
- ~2 days

What Pardi's climate asks of the equipment
| Need | For Pardi | Why |
|---|---|---|
| Cooling | Exhaust fans + cellulose pads | Pads bring 39°C to ~32°C in April |
| Air movement | Air circulation fans | Humid from June to September |
| Shading | Aluminium or double-layer net | Sun peaks at 7.1 kWh/m² in May |
| Rain | Wide gutters, funnels, skirting apron | July: ~678 mm |
| Nights | No extra need | — |
Cooling and air movement
Dry April air lets wet pads cool 39°C down to about 32°C.
Local market prices for polyhouse crops near Pardi
Prices at the mandis in Valsad district follow a clear yearly pattern. Bottle gourd is the extreme case, from ₹859 per quintal in March up to ₹2,395 in August (179% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Bottle gourd | 2 | ₹1,544/q | Aug · ₹2,395 | Mar · ₹859 | 179% |
| Bitter gourd | 2 | ₹2,740/q | Feb · ₹3,518 | Oct · ₹1,526 | 131% |
Timing your crop for the Pardi market
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, bottle gourd peaks in August; at about 55 days to first harvest, transplant in June.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Bottle gourd | Jul, Aug | ~55 | June | Mar |
| Bitter gourd | Jan, Feb, Jul, Dec | ~55 | December | Oct |
Pardi's weather, month by month
April is the hottest month, with afternoons around 39°C; January nights drop to about 15°C. July is the wettest (678 mm of 2,021 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 31.5°C | 15°C | 38% | 1 mm | 4.7 | 2.1 |
| Feb | 33.7°C | 16.7°C | 38% | 3 mm | 5.6 | 2 |
| Mar | 36.8°C | 19.7°C | 41% | 3 mm | 6.5 | 2.1 |
| Apr | 39°C | 22.5°C | 50% | 3 mm | 7 | 2.4 |
| May | 37.8°C | 25°C | 59% | 9 mm | 7.1 | 3.4 |
| Jun | 32.4°C | 25.8°C | 77% | 415 mm | 5.3 | 4 |
| Jul | 28.7°C | 24.8°C | 89% | 678 mm | 4 | 4.2 |
| Aug | 28.1°C | 24°C | 90% | 511 mm | 4.1 | 3.6 |
| Sep | 29.1°C | 23.3°C | 88% | 323 mm | 4.8 | 2.2 |
| Oct | 31.4°C | 21°C | 72% | 59 mm | 5.3 | 1.6 |
| Nov | 32.5°C | 18.2°C | 56% | 12 mm | 4.7 | 1.8 |
| Dec | 32°C | 16.2°C | 43% | 4 mm | 4.4 | 2 |
Film and shade nets
39°C highs and 7.1 kWh/m² of sun: shade and reflective nets matter here.

Polyfilm White Diffused 250 Micron (4.5 m)
₹254 per metre + GST
Used in: NVPH, Fan & Pad

White Shade Net 50%
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Aluminium Shade Net (4 m)
₹315 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse (optional upgrade)

Green Shade Net 50%
₹27 per metre + GST
Used in: Square Nethouse, Curved Nethouse (optional upgrade)
Ventilation and insect control
Roll-up curtains and insect net let a naturally ventilated house breathe without letting pests in.
Gutters and rain handling
July brings about 678 mm; gutters and skirting must carry it away.
Doors and entry
Heavy rain and humidity: aluminium doors do not swell or warp.
Frame fittings
Clamps, couplers and springs hold the frame and film; we count every one for your size.

Clamps 60 mm Full
₹17 per piece + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Four Way Pipe Coupler (48 OD)
₹130 per piece + GST
Used in: Square Nethouse

Aluminium Profile
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

GI Spring
₹6 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse
Fan and pad cooling in Pardi
Pad cooling works by evaporation, so it needs dry air. In April Pardi averages 39°C at 50% humidity, which pads can bring down to roughly 32°C inside. That is enough for leafy greens and nursery crops through summer.
- Fan & pad house, 52 × 76 m
- 3,952 m²
- Exhaust fans
- 12 nos
- Cellulose pads
- 82 nos
- Material incl. GST
- ₹32,48,775
An equipment care calendar for Pardi
- 1
Before April
Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 39°C peak.
- 2
Before July
Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 678 mm.
- 3
June to September
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 4
October to February
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Which equipment each system uses
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Tested, certified and under warranty

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Pardi.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Delivery and spares in Pardi
Pardi is roughly 390 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Pardi in about 2 days, carrying the invoice, the test reports and 100% invoice insurance.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Pardi and the rest of Valsad district
Pardi is one of the cooler towns in Gujarat (56th hottest of 74), and among the wettest (1st for rain). We also supply 3 other towns in Valsad district.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Do you supply polyhouse equipment in Pardi?
Yes. We dispatch from our Satara factory, about 390 km from Pardi, and the truck usually arrives in about 2 days.
Does fan and pad cooling work in Pardi?
Yes. In April the air is dry enough (50%) for pads to bring 39°C down to about 32°C.
What warranty do you give?
GI structure 15 years, polyfilm 2.5 years, nets 3 years.
Can I get lab test reports?
Yes. Tensile, chemical analysis, salt spray, cupping and pull-out tests by third-party labs can be added to any order; reports come with the delivery.
Do you install the equipment?
We supply material and equipment. Kryzen Biotech’s construction team can build the structure; see polyhouse construction in your town on the Kryzen blog.
What equipment does a naturally ventilated polyhouse need?
Roll-up side curtains with manual gear units, side insect net, roof film with aluminium profiles and springs, gutters, doors and an optional entry cabin. Air circulation fans and shade net are optional upgrades.
Equipment supply near Pardi
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Pardi | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Valsad | ~10 km | Works (~32°C) | 4 | Apr, 39°C |
| Equipment supplier in Vapi | ~20 km | Works (~32°C) | 4 | Apr, 39°C |
| Equipment supplier in Silvassa | ~30 km | Works (~32°C) | 4 | Apr, 39°C |
| Equipment supplier in Umbergaon | ~50 km | Limited | 5 | May, 30°C |
| Equipment supplier in Navsari | ~60 km | Works (~33°C) | 3 | Apr, 40°C |
| Equipment supplier in Surat | ~100 km | Works (~33°C) | 3 | Apr, 40°C |











