NVPH materials · Raisen district, Madhya Pradesh
Naturally Ventilated Polyhouse Materials Seller in Raisen
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
If you are planning a naturally ventilated polyhouse in Raisen, the frame and film are only half the decision; the other half is how the house breathes in May and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Raisen.
- Hottest month
- May, ~42°C
- Humid (75%+)
- 3 months
- NVPH material, 1 acre
- ₹734/m²
- Delivery
- ~4 days

Does a naturally ventilated polyhouse suit Raisen?
In May the air is dry enough (24% humidity) for an NVPH to vent well, but afternoons of 42°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.
| Measure | Raisen | Madhya Pradesh average (84 towns) | What it means for the NVPH |
|---|---|---|---|
| Hottest-month high | 42°C (May) | 42.7°C | close to the state average |
| Humidity in that month | 24% | 25% | Dry air vents easily |
| Rain a year | 1,216 mm | 1,036 mm | 180 mm more than the state average |

Changes we would make for Raisen
Every NVPH kit starts from the same standard list. These are the changes we would suggest for Raisen; each one is a tick box on the kit builder's upgrades step, priced for your size.
| Part | Standard kit | For Raisen | Why |
|---|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Keep | Spreads May's 7.2 kWh/m²/day of sunlight evenly |
| Shade net | White 50% | Aluminium Shade Net (4 m) | Reflects heat back out at 42°C |
| Second net layer | None | Add (double layer) | Open or close it by the season with ropes and pulleys |
| Air circulation | Roof vent + curtains | Keep | Natural airflow is enough |
| Doors | FRP (fibre) doors | Aluminium Door | Heavy rain: aluminium does not warp or swell |
| Gutters | GI gutter sheet + funnels | Keep | July brings ~418 mm; clean before June |
| Entry cabin | Optional | Include | A double door keeps whitefly and thrips out when people walk in |
Twelve months of weather in Raisen
May is the hottest month, with afternoons around 42.3°C; January nights drop to about 8.7°C. July is the wettest (418 mm of 1,216 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 25.6°C | 8.7°C | 42% | 11 mm | 4.3 | 1.8 |
| Feb | 29.7°C | 11.9°C | 35% | 11 mm | 5.3 | 1.9 |
| Mar | 34.8°C | 17.1°C | 27% | 12 mm | 6.3 | 2.1 |
| Apr | 40°C | 22.9°C | 20% | 6 mm | 7.1 | 2.5 |
| May | 42.3°C | 27.5°C | 24% | 13 mm | 7.2 | 3.5 |
| Jun | 37.4°C | 26.6°C | 53% | 167 mm | 5.8 | 3.6 |
| Jul | 30.7°C | 23.7°C | 81% | 418 mm | 4.1 | 3.3 |
| Aug | 28.8°C | 22.9°C | 88% | 381 mm | 3.8 | 2.8 |
| Sep | 29.5°C | 21.6°C | 83% | 155 mm | 4.9 | 2 |
| Oct | 29.5°C | 18°C | 69% | 25 mm | 5.3 | 1.5 |
| Nov | 28°C | 13.5°C | 58% | 11 mm | 4.5 | 1.4 |
| Dec | 26.1°C | 9.8°C | 49% | 6 mm | 4.2 | 1.6 |
NVPH material list: 20 × 24 m in Raisen
A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.
| Group | Item | Quantity | Weight |
|---|---|---|---|
| GI structure | Side Hockey (60X2.0X5500) | 22 nos | 378 kg |
| GI structure | Small Column (76X2.0X4500) | 18 nos | 305 kg |
| GI structure | Big Bottom (60X2.0X8000) | 8 nos | 200 kg |
| GI structure | Hockey Runner (42X2.0X4000) | 18 nos | 150 kg |
| GI structure | Big Arc (42X2.0X5200) | 12 nos | 130 kg |
| Film & nets | Polyfilm White Diffused 250 Micron (4.5 m) | 158 mtr | — |
| Film & nets | Polyfilm White Diffused 250 Micron (5.5 m) | 73 mtr | — |
| Film & nets | Side Insect Net (5.2 m) | 90 mtr | — |
| Film & nets | Side Skirting Apron (1.5 m) | 90 mtr | — |
| Film & nets | White Shade Net 50% | 80 mtr | — |
| Fittings & accessories | Aluminium Profile | 500 mtr | — |
| Fittings & accessories | GI Spring | 900 mtr | — |
| Fittings & accessories | Manual Gear Roll Up Curtain Unit | 4 nos | — |
| Fittings & accessories | Fibre Door | 2 nos | — |
| Fittings & accessories | F Bracket | 24 nos | — |
This week's NVPH material price for Raisen
| Size | Span × bay | Area | Material incl. GST | Per m² |
|---|---|---|---|---|
| Small | 20 × 24 m | 480 m² | ₹4,68,814 | ₹977 |
| Medium | 28 × 36 m | 1,008 m² | ₹8,59,963 | ₹853 |
| About 1 acre | 52 × 76 m | 3,952 m² | ₹28,99,897 | ₹734 |
Price your own size for Raisen
Choose span and bay and get the full list with quantities, weights and rates in a minute.
Running an NVPH through Raisen's year
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~42°C highs | ||||||||||||
| Strongest sun | 7.2 kWh/m²/day | ||||||||||||
| Wettest month | ~418 mm | ||||||||||||
| Humid (75%+) | July–September |
- 1
Before July
Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 418 mm, the heaviest rain of the year.
- 2
July to September
Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.
- 3
May
Peak heat, about 42°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.
Crops for an NVPH in Raisen

Coloured capsicum
NVPHGrow under shade net through May, when highs reach 42°C.

Cucumber (parthenocarpic)
NVPHFast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose
NVPHCut flowers with year-round demand from city florists and events.
NVPH or fan & pad in Raisen?
Raisen is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 42°C down to about 30°C. Choose it only if you grow crops that need that cooling.
| Naturally ventilated | Fan & pad | |
|---|---|---|
| Cooling | Roof vent and side curtains (no power) | Exhaust fans and wet pads, ~30°C inside in May |
| Running cost | None for cooling | Electricity for fans and a pump |
| Material price, 1 acre | ₹28,99,897 (₹734/m²) | ₹32,48,775 (₹822/m²) |
| Suits in Raisen | Capsicum, cucumber, tomato, flowers | Leafy greens and crops needing tight control in summer |
Subsidy and delivery
NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.
Subsidy for a project in Raisen
Which scheme fits your size, a worked example and the steps to apply.
We dispatch from Degaon near Satara, about 930 km from Raisen by road. Expect the material in about 4 days after dispatch; share the farm PIN code and the access road so we send a vehicle that can reach the site.
Raisen and the rest of Raisen district
Raisen is one of the cooler towns in Madhya Pradesh (68th hottest of 84), and among the wettest (21st for rain). We also supply 1 other town in Raisen district.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Is a naturally ventilated polyhouse enough for Raisen's summer?
For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (42°C), a fan and pad house cools better because the air is dry.
What does NVPH material cost in Raisen?
This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.
Can I buy only the film or nets for an existing NVPH?
Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.
What is included in the NVPH material kit?
The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.
How long does delivery to Raisen take?
About 930 km by road from our Satara factory, so usually in about 4 days after dispatch.
Which steel is used?
ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.
NVPH materials near Raisen
Neighbouring towns on the same delivery route, and how their summers compare.
| Town | From Raisen | Hottest month | Humid months | Suits |
|---|---|---|---|---|
| NVPH materials in Vidisha | ~30 km | May, 42°C | 3 | NVPH + fan & pad |
| NVPH materials in Bhopal | ~50 km | May, 42°C | 3 | NVPH + fan & pad |
| NVPH materials in Mandideep | ~50 km | May, 43°C | 3 | NVPH + fan & pad |
| NVPH materials in Sehore | ~90 km | May, 43°C | 3 | NVPH + fan & pad |
| NVPH materials in Sihora | ~90 km | May, 43°C | 3 | NVPH + fan & pad |
| NVPH materials in Itarsi | ~100 km | May, 43°C | 3 | NVPH + fan & pad |
