How it worksBuy individual items

NVPH materials · Narmadapuram district, Madhya Pradesh

Naturally Ventilated Polyhouse Materials Seller in Itarsi

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

We sell the complete NVPH material kit to growers in Itarsi straight from our Satara factory: the GI frame cut and drilled to drawing, 250-micron diffused film, side insect net, curtains with gear units, gutters and every fitting. Below is the live list and price, and what Itarsi's weather changes in it.

Hottest month
May, ~43°C
Humid (75%+)
3 months
NVPH material, 1 acre
₹734/m²
Delivery
~4 days
Naturally ventilated polyhouse built with our material, like those we supply to Itarsi
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Itarsi?

In May the air is dry enough (24% humidity) for an NVPH to vent well, but afternoons of 43°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureItarsiMadhya Pradesh average (84 towns)What it means for the NVPH
Hottest-month high43°C (May)42.7°Cclose to the state average
Humidity in that month24%25%Dry air vents easily
Rain a year1,299 mm1,036 mm263 mm more than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Itarsi
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Itarsi

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Itarsi; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor ItarsiWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 7.3 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 43°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsAluminium DoorHeavy rain: aluminium does not warp or swell
GuttersGI gutter sheet + funnelsKeepJuly brings ~430 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What protected crops fetch at mandis near Itarsi

We averaged two years of daily Agmarknet prices from 12 markets in Narmadapuram district for crops that are grown under cover. Tomato swings the most: about ₹2,002 per quintal in November against ₹499 in March, a 301% difference. Green chilli is the steadiest, which makes it a safer second crop.

CropMarketsAverageHighest monthLowest monthSwing
Tomato7₹1,295/qNov · ₹2,002Mar · ₹499301%
Cabbage7₹897/qSep · ₹1,159Mar · ₹61888%
Cauliflower7₹1,439/qSep · ₹2,058Mar · ₹770167%
Brinjal7₹1,001/qOct · ₹1,387Mar · ₹672106%
Bottle gourd7₹846/qOct · ₹1,063Mar · ₹61972%
Okra (bhindi)7₹1,759/qMar · ₹2,283Jul · ₹1,31673%
Coriander (leaves)10₹1,933/qOct · ₹3,447Feb · ₹1,043230%
Green chilli5₹2,610/qJul · ₹3,220May · ₹2,01860%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Narmadapuram district. ₹ per quintal (100 kg).

Timing your crop for the Itarsi market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, tomato peaks in November; at about 75 days to first harvest, transplant in August.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
TomatoAug, Nov~75AugustMar
CabbageAug, Sep, Oct, Nov, Dec~75JuneMar
CauliflowerJul, Aug, Sep, Oct~75JuneMar
BrinjalSep, Oct, Nov~60AugustMar
Bottle gourdAug, Sep, Oct, Nov~55AugustMar
Okra (bhindi)Mar, Oct~45JanuaryJul
Coriander (leaves)Oct~35AugustFeb
Green chilliJul, Aug, Oct, Nov, Dec~75AprilMay
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Twelve months of weather in Itarsi

May is the hottest month, with afternoons around 43.4°C; January nights drop to about 10.6°C. July is the wettest (430 mm of 1,299 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Oct, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan27.9°C10.6°C39%13 mm4.41.7
Feb31.8°C13.7°C32%10 mm5.31.8
Mar36.4°C18.2°C26%14 mm6.31.9
Apr41.2°C23.4°C20%7 mm7.12.2
May43.4°C27.8°C24%15 mm7.33.2
Jun37.2°C26.5°C56%173 mm5.63.4
Jul30.2°C23.6°C84%430 mm3.83.3
Aug28.6°C22.9°C89%398 mm3.62.8
Sep29.5°C22.1°C85%190 mm4.81.8
Oct30.3°C18.7°C69%33 mm5.31.3
Nov30.1°C14.7°C55%12 mm4.61.4
Dec28.7°C11.8°C41%4 mm4.31.5
NASA POWER long-term monthly averages for Itarsi (22.61, 77.76).

NVPH material list: 20 × 24 m in Itarsi

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Itarsi

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Itarsi and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Itarsi

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Itarsi's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~43°C highs
Strongest sun7.3 kWh/m²/day
Wettest month~430 mm
Humid (75%+)July–September
Nethouse seasonOctober–February
NASA POWER monthly averages for Itarsi.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 430 mm, the heaviest rain of the year.

  2. 2

    July to September

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 43°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Itarsi

Coloured capsicum for Itarsi

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 43°C.

Cucumber (parthenocarpic) for Itarsi

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Itarsi

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Itarsi?

Itarsi is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 43°C down to about 31°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~31°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in ItarsiCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Itarsi

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

From our Satara factory to Itarsi is about 850 km by road, so a dispatched load normally arrives in about 4 days. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.

Itarsi and the rest of Narmadapuram district

Itarsi is one of the hotter towns in Madhya Pradesh (17th of 84 we cover), and among the wettest (9th for rain). We also supply 3 other towns in Narmadapuram district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Itarsi's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (43°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Itarsi?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Itarsi take?

About 850 km by road from our Satara factory, so usually in about 4 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

Do I need an entry cabin in Itarsi?

We recommend it: 3 humid months favour whitefly and thrips, and a double-door cabin keeps them out.

NVPH materials near Itarsi

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom ItarsiHottest monthHumid monthsSuits
NVPH materials in Seoni-Malwa~50 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Sohagpur~60 kmMay, 42°C3NVPH + fan & pad
NVPH materials in Mandideep~70 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Pipariya~80 kmMay, 44°C3NVPH + fan & pad
NVPH materials in Sarni~90 kmMay, 41°C3NVPH + fan & pad
NVPH materials in Bhopal~100 kmMay, 42°C3NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Itarsi
  2. Kryzen: Polyhouse farming in Itarsi
  3. NASA POWER monthly climate averages for Itarsi
  4. NHB cost norms for protected cultivation
Build your kit