How it worksBuy individual items

NVPH materials · Raigad district, Maharashtra

Naturally Ventilated Polyhouse Materials Seller in Panvel

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

If you are planning a naturally ventilated polyhouse in Panvel, Raigad district, the frame and film are only half the decision; the other half is how the house breathes in April and drains in July. Here is the NVPH kit we supply, priced this week, with the choices we would make for Panvel.

Hottest month
April, ~38°C
Humid (75%+)
5 months
NVPH material, 1 acre
₹734/m²
Delivery
Next day
Naturally ventilated polyhouse built with our material, like those we supply to Panvel
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Panvel?

In April the air is dry enough (53% humidity) for an NVPH to vent well, but afternoons of 38°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through April, compare with a fan and pad house below.

MeasurePanvelMaharashtra average (130 towns)What it means for the NVPH
Hottest-month high38°C (April)40.7°C2.7°C cooler than the state average
Humidity in that month53%35%Dry in April, but humid from June to October
Rain a year2,509 mm1,176 mm1,333 mm more than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Panvel
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Panvel

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Panvel; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor PanvelWhy
Roof film250-micron white diffused polyfilmKeepSpreads April's 7.1 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 38°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsAir Circulation Fan5 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsAluminium DoorHeavy rain: aluminium does not warp or swell
GuttersGI gutter sheet + funnelsKeepJuly brings ~834 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What protected crops fetch at mandis near Panvel

Across 6 mandis in Raigad district, 8 polyhouse and nethouse crops trade regularly. Bitter gourd has the most arrivals; Beans has the widest price swing (152%), peaking in June.

CropMarketsAverageHighest monthLowest monthSwing
Bitter gourd6₹4,349/qJun · ₹5,539Mar · ₹3,60154%
Okra (bhindi)6₹4,875/qDec · ₹6,335Apr · ₹3,92262%
Bottle gourd6₹3,500/qJun · ₹4,074Mar · ₹2,88541%
Cucumber6₹3,499/qJun · ₹4,241Mar · ₹3,08937%
Beans3₹6,257/qJun · ₹10,009Feb · ₹3,972152%
Tomato3₹3,119/qDec · ₹4,032Mar · ₹2,10791%
Snake gourd4₹3,738/qJul · ₹4,434Mar · ₹3,17939%
Ridge gourd4₹5,001/qJun · ₹6,920Apr · ₹3,51397%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Raigad district. ₹ per quintal (100 kg).

When to plant in Panvel for the best prices

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, bitter gourd peaks in June; at about 55 days to first harvest, transplant in April.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
Bitter gourdJun, Jul~55AprilMar
Okra (bhindi)Jan, Dec~45OctoberApr
Bottle gourdJun, Jul, Aug, Sep, Nov~55AprilMar
CucumberJun~40AprilMar
BeansJun~50AprilFeb
TomatoJun, Nov, Dec~75SeptemberMar
Snake gourdJun, Jul, Nov~55MayMar
Ridge gourdJun~50AprilApr
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Twelve months of weather in Panvel

April is the hottest month, with afternoons around 38.4°C; January nights drop to about 15.4°C. July is the wettest (834 mm of 2,509 mm a year), and humidity stays at 75% or more for 5 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan31°C15.4°C51%0 mm52
Feb33.8°C17.6°C44%2 mm5.92.1
Mar36.8°C20.6°C45%5 mm6.62.2
Apr38.4°C23.1°C53%3 mm7.12.3
May37°C25.4°C60%22 mm72.9
Jun31.5°C25.8°C80%535 mm4.63.7
Jul28.4°C24.9°C90%834 mm3.34
Aug27.9°C24.2°C90%606 mm3.43.5
Sep28.8°C23.6°C89%376 mm4.32.3
Oct30.8°C21.6°C78%104 mm51.8
Nov30.6°C18.6°C69%17 mm4.92
Dec30.3°C16.3°C60%5 mm4.72
NASA POWER long-term monthly averages for Panvel (18.99, 73.11).

NVPH material list: 28 × 36 m in Panvel

A 28 m wide, 36 m long naturally ventilated polyhouse (1,008 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSmall Column (76X2.0X4500)36 nos609 kg
GI structureSide Hockey (60X2.0X5500)32 nos549 kg
GI structureBig Bottom (60X2.0X8000)21 nos524 kg
GI structureBig Arc (42X2.0X5200)27 nos292 kg
GI structureGI Gutter Sheet70 mtr—
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)255 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)138 mtr—
Film & netsSide Insect Net (5.2 m)130 mtr—
Film & netsSide Skirting Apron (1.5 m)130 mtr—
Film & netsWhite Shade Net 50%192 mtr—
Fittings & accessoriesAluminium Profile836 mtr—
Fittings & accessoriesGI Spring1,425 mtr—
Fittings & accessoriesF Bracket54 nos—
Fittings & accessoriesClamps 60 mm Half358 nos—
Fittings & accessoriesSelf Drilling Screw1,881 nos—
The largest items of a 28 × 36 m kit (67 items in all, about 4.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Panvel

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Panvel and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Panvel

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Panvel's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~38°C highs
Strongest sun7.1 kWh/m²/day
Wettest month~834 mm
Humid (75%+)June–October
Nethouse seasonNovember–February
NASA POWER monthly averages for Panvel.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 834 mm, the heaviest rain of the year.

  2. 2

    June to October

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    April

    Peak heat, about 38°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    November to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Panvel

Coloured capsicum for Panvel

Coloured capsicum

NVPH

Grow under shade net through April, when highs reach 38°C.

Cucumber (parthenocarpic) for Panvel

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Panvel

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Panvel?

Panvel is one of the towns where a fan and pad house can earn its running cost: dry April air lets wet pads take 38°C down to about 32°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~32°C inside in April
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in PanvelCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Panvel

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

From our Satara factory to Panvel is about 190 km by road, so a dispatched load normally arrives the next day. Each vehicle is insured for the full invoice value and carries the lab certificates for your order.

Panvel and the rest of Raigad district

Panvel is one of the cooler towns in Maharashtra (112th hottest of 130), and among the wettest (7th for rain). We also supply 4 other towns in Raigad district.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Panvel's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in April. For leafy greens through April (38°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Panvel?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Panvel take?

About 190 km by road from our Satara factory, so usually the next day after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

NVPH materials near Panvel

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom PanvelHottest monthHumid monthsSuits
NVPH materials in Navi Mumbai~10 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Ambernath~30 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Kalyan-Dombivli~30 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Karjat~30 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Mumbai~30 kmApr, 38°C5NVPH + fan & pad
NVPH materials in Ulhasnagar~30 kmApr, 38°C5NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Panvel
  2. Kryzen: Polyhouse farming in Panvel
  3. NASA POWER monthly climate averages for Panvel
  4. NHB cost norms for protected cultivation
Build your kit