How it worksBuy individual items

NVPH materials · Tamil Nadu

Naturally Ventilated Polyhouse Materials Seller in Nagercoil

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

A naturally ventilated polyhouse (NVPH) needs no fans or pads: warm air leaves through the roof vent and fresh air comes in through roll-up side curtains. Whether that is enough depends on the weather, so this page works through Nagercoil's numbers — March afternoons of about 31°C, 1,315 mm of rain a year and humid air from April to January — and the NVPH material we would send for them.

Hottest month
March, ~31°C
Humid (75%+)
10 months
NVPH material, 1 acre
₹734/m²
Delivery
~5 days
Naturally ventilated polyhouse built with our material, like those we supply to Nagercoil
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

Does a naturally ventilated polyhouse suit Nagercoil?

With highs of about 31°C in March, natural ventilation keeps the house within range for most crops without any running cost. The roof vent and side curtains do the work; you only manage them by the season.

MeasureNagercoilTamil Nadu average (119 towns)What it means for the NVPH
Hottest-month high31°C (March)36.3°C5.3°C cooler than the state average
Humidity in that month73%60%Keep curtains open; disease risk is higher
Rain a year1,315 mm1,048 mm267 mm more than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Nagercoil
Cool air enters through the side curtains; warm air leaves through the roof vent.

Changes we would make for Nagercoil

Every NVPH kit starts from the same standard list. These are the changes we would suggest for Nagercoil; each one is a tick box on the kit builder's upgrades step, priced for your size.

PartStandard kitFor NagercoilWhy
Roof film250-micron white diffused polyfilmKeepSpreads March's 6.1 kWh/m²/day of sunlight evenly
Shade netWhite 50%Keep white 50%Sunlight here does not call for a reflective net
Second net layerNoneOptionalOnly for shade-loving crops
Air circulationRoof vent + curtainsAir Circulation Fan10 humid months: moving air keeps leaves dry
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepOctober brings ~256 mm; clean before September
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

What protected crops fetch at mandis near Nagercoil

Across 5 mandis in Nagercoil district, 8 polyhouse and nethouse crops trade regularly. Beans has the most arrivals; Tomato has the widest price swing (189%), peaking in December.

CropMarketsAverageHighest monthLowest monthSwing
Beans5₹7,575/qOct · ₹8,962Feb · ₹6,16345%
Okra (bhindi)5₹4,833/qDec · ₹5,594May · ₹3,66353%
Tomato5₹3,332/qDec · ₹5,306Mar · ₹1,837189%
Brinjal5₹7,073/qDec · ₹8,894Mar · ₹5,01877%
Green chilli5₹6,439/qDec · ₹7,989Apr · ₹4,19890%
Cucumber5₹3,210/qNov · ₹4,724May · ₹1,965140%
Papaya5₹3,889/qMar · ₹4,728Jun · ₹3,33442%
Snake gourd5₹4,460/qDec · ₹5,297Mar · ₹3,33759%
Agmarknet daily modal prices via data.gov.in, Nov 2024 – Nov 2026, markets in Nagercoil district. ₹ per quintal (100 kg).

Timing your crop for the Nagercoil market

Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, beans peaks in October; at about 50 days to first harvest, transplant in August.

CropSells bestDays to first harvestTransplant / sow inAvoid harvesting in
BeansMay, Aug, Sep, Oct~50AugustFeb
Okra (bhindi)Jan, Feb, Mar, Nov, Dec~45OctoberMay
TomatoDec~75SeptemberMar
BrinjalNov, Dec~60OctoberMar
Green chilliAug, Sep, Oct, Dec~75SeptemberApr
CucumberNov, Dec~40SeptemberMay
Snake gourdOct, Nov, Dec~55OctoberMar
Days to harvest are typical for polyhouse and nethouse crops and vary by variety and season. Plan nursery raising 3–5 weeks before transplanting.

Nagercoil month by month

March is the hottest month, with afternoons around 30.9°C; January nights drop to about 24.6°C. October is the wettest (256 mm of 1,315 mm a year), and humidity stays at 75% or more for 10 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Mar, Apr, Aug, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan28.9°C24.6°C75%14 mm5.24.9
Feb30°C25.1°C73%17 mm5.94.2
Mar30.9°C26.5°C73%42 mm6.13.2
Apr30.8°C27.6°C76%89 mm5.83.2
May29.9°C27.7°C81%132 mm5.54.9
Jun28.6°C26.6°C85%139 mm5.15.5
Jul27.9°C25.6°C86%117 mm5.15.4
Aug28°C25.5°C86%91 mm5.45.2
Sep28.2°C25.8°C85%141 mm5.54.9
Oct28.3°C26°C83%256 mm4.93.8
Nov28.3°C26°C81%218 mm4.23.6
Dec28.2°C25.2°C80%59 mm4.44.8
NASA POWER long-term monthly averages for Nagercoil (8.18, 77.43).

NVPH material list: 20 × 24 m in Nagercoil

A 20 m wide, 24 m long naturally ventilated polyhouse (480 m²) needs the items below. Quantities come from our kit formulas, the same ones the kit builder uses.

GroupItemQuantityWeight
GI structureSide Hockey (60X2.0X5500)22 nos378 kg
GI structureSmall Column (76X2.0X4500)18 nos305 kg
GI structureBig Bottom (60X2.0X8000)8 nos200 kg
GI structureHockey Runner (42X2.0X4000)18 nos150 kg
GI structureBig Arc (42X2.0X5200)12 nos130 kg
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)158 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)73 mtr—
Film & netsSide Insect Net (5.2 m)90 mtr—
Film & netsSide Skirting Apron (1.5 m)90 mtr—
Film & netsWhite Shade Net 50%80 mtr—
Fittings & accessoriesAluminium Profile500 mtr—
Fittings & accessoriesGI Spring900 mtr—
Fittings & accessoriesManual Gear Roll Up Curtain Unit4 nos—
Fittings & accessoriesFibre Door2 nos—
Fittings & accessoriesF Bracket24 nos—
The largest items of a 20 × 24 m kit (67 items in all, about 2.5 tonnes of steel and fittings). The kit builder shows every line for your exact size.

This week's NVPH material price for Nagercoil

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Nagercoil and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Nagercoil

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Running an NVPH through Nagercoil's year

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~31°C highs
Strongest sun6.1 kWh/m²/day
Wettest month~256 mm
Humid (75%+)April–January
Nethouse seasonDecember–April
NASA POWER monthly averages for Nagercoil.
  1. 1

    Before October

    Clear gutters and funnels, check the film for tears and tighten the GI springs. October brings about 256 mm, the heaviest rain of the year.

  2. 2

    April to January

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.

  3. 3

    March

    Peak heat, about 31°C. Roll the curtains fully up, add shade only for sensitive crops, and irrigate early in the day.

  4. 4

    December to April

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Nagercoil

Coloured capsicum for Nagercoil

Coloured capsicum

NVPH

The most common polyhouse crop: steady yields over an 8–10 month cycle.

Cucumber (parthenocarpic) for Nagercoil

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; keep the curtains open in humid months to limit disease.

Tomato for Nagercoil

Tomato

NVPH

Indeterminate varieties trained up strings give a long harvest under cover.

Gerbera and rose for Nagercoil

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Nagercoil?

In Nagercoil the NVPH is the clear choice for most growers: at 73% humidity in March, pads would cool only a few degrees while adding power and water bills.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in NagercoilCapsicum, cucumber, tomato, flowersRarely worth it at this humidity

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Nagercoil

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

Nagercoil is roughly 1,500 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Nagercoil in about 5 days, carrying the invoice, the test reports and 100% invoice insurance.

Nagercoil within Tamil Nadu

Nagercoil is one of the cooler towns in Tamil Nadu (115th hottest of 119), and among the wettest (14th for rain). These are the larger towns we supply elsewhere in Tamil Nadu.

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Nagercoil's summer?

Yes for most crops. 31°C at 73% humidity is best handled by open curtains and shade net; pad cooling would add little at that humidity.

What does NVPH material cost in Nagercoil?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Nagercoil take?

About 1,500 km by road from our Satara factory, so usually in about 5 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

NVPH materials near Nagercoil

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom NagercoilHottest monthHumid monthsSuits
NVPH materials in Padmanabhapuram~20 kmMar, 31°C10NVPH
NVPH materials in Panagudi~30 kmMar, 36°C9NVPH
NVPH materials in Unnamalaikadai~30 kmMar, 36°C9NVPH
NVPH materials in Pacode~40 kmMar, 36°C9NVPH
NVPH materials in Vadakkuvalliyur~40 kmMar, 36°C9NVPH
NVPH materials in Neyyattinkara~60 kmMar, 33°C9NVPH

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Nagercoil
  2. Kryzen: Polyhouse farming in Nagercoil
  3. NASA POWER monthly climate averages for Nagercoil
  4. NHB cost norms for protected cultivation
Build your kit