NVPH materials · Chennai district, Tamil Nadu
Naturally ventilated polyhouse material for Chennai farms
By Editorial Team, Kryzen Biotech · Updated 13 November 2026
A naturally ventilated polyhouse can work in Chennai, but it must be managed for heat from March to June and for high humidity and rain from September to January. For this climate, prioritise roof vents, properly operated side curtains, clean gutters, insect exclusion and air movement rather than expecting a sealed house to solve humidity.
- Hottest month
- May, ~36°C
- Humid (75%+)
- 5 months
- NVPH material, 1 acre
- ₹734/m²
- Delivery
- ~4 days

What Chennai weather means for an NVPH
Chennai’s hottest average afternoon is 35.9°C in May, while April has the strongest average sun at 6.5 kWh/m²/day. Natural ventilation is useful through these hot months when both side curtains and roof vents are open, allowing warm air to leave at the top and replacement air to enter at the sides. It will not make the house cold; the practical aim is to prevent heat build-up and keep crop leaves moving.
The harder operating period is September to January. Relative humidity is 77% in September, 80% in October and December, and reaches 82% in November. Chennai receives 1,253 mm rain in a year, 205 mm more than the Tamil Nadu average in the comparison table, with about 292 mm in November alone. During rain and humid spells, an NVPH needs protected ventilation: open curtains whenever rain is not entering, avoid keeping foliage wet, and do not crowd plants.
There is no serious cold-night requirement in the monthly data. January is the coolest month, with an average night low of 20.5°C. This mild January–March period is the listed nethouse season and is also a sensible time for main planting, maximum light entry and structural checks.
- May: 35.9°C average high; maximise vent opening and use shade only where the crop needs it.
- April: 6.5 kWh/m²/day sun; use the supplied white diffused film and manage white 50% shade net carefully.
- October–November: 264 mm and 292 mm rain respectively; gutters and drainage must be ready before this period.
- September–January: humidity is 75% or more; focus on leaf dryness and airflow.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 27.7°C | 20.5°C | 77% | 16 mm | 5 | 2.8 |
| Feb | 30.3°C | 21°C | 71% | 6 mm | 5.8 | 2.7 |
| Mar | 33.7°C | 23.1°C | 66% | 15 mm | 6.4 | 2.9 |
| Apr | 35.4°C | 25.6°C | 66% | 26 mm | 6.5 | 3.4 |
| May | 35.9°C | 27.2°C | 65% | 55 mm | 5.9 | 3.6 |
| Jun | 34.7°C | 26.5°C | 64% | 68 mm | 5.2 | 3.5 |
| Jul | 33.7°C | 25.7°C | 67% | 108 mm | 4.9 | 3.5 |
| Aug | 32.8°C | 25.2°C | 72% | 132 mm | 4.9 | 3.1 |
| Sep | 31.6°C | 25°C | 77% | 145 mm | 5.1 | 2.6 |
| Oct | 30.2°C | 24.7°C | 80% | 264 mm | 4.6 | 2.5 |
| Nov | 28.3°C | 23.2°C | 82% | 292 mm | 4.2 | 3.3 |
| Dec | 27.3°C | 21.6°C | 80% | 126 mm | 4.2 | 3.4 |
Run roof vents, curtains and shade through the year
From January to March, open the house for maximum light and fresh air in the relatively dry, mild stretch. This is the time to plan planting and repair any film tears, springs or curtain mechanisms before the hotter months. In March through June, roll side curtains fully up as conditions permit and keep the roof vent unobstructed. Irrigate early in the day in May, rather than adding moisture late in the day when plants cannot dry quickly.
In July and August, rain increases to 108 mm and 132 mm respectively. Watch where rain reaches the crop rows and close only the affected curtain side enough to stop direct wetting; reopen it once rain passes. In September through January, use curtains actively rather than leaving the house closed for long periods. Open them whenever it is not raining, and run air-circulation fans in the morning if included in the project.
Use the white 50% shade net as a crop-management tool, not as a permanent substitute for airflow. For shade-sensitive crops it can reduce light load in peak heat; for crops needing maximum light, remove or avoid unnecessary extra shade. The seasonal calendar below sets out the key checks before November, during the humid months and in May.
- Before October: clear gutters and funnels, inspect the roof film, and tighten GI springs.
- During rain: stop direct rain entry without shutting the house for the entire day.
- During humid mornings: move air across the crop and allow foliage to dry.
- During January–March: carry out maintenance and plan the main crop cycle.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~36°C highs | ||||||||||||
| Strongest sun | 6.5 kWh/m²/day | ||||||||||||
| Wettest month | ~292 mm | ||||||||||||
| Humid (75%+) | September–January | ||||||||||||
| Nethouse season | January–March |
- 1
Before November
Clear gutters and funnels, check the film for tears and tighten the GI springs. November brings about 292 mm, the heaviest rain of the year.
- 2
September to January
Humidity stays at 75% or more. Keep side curtains open whenever it is not raining and run air circulation fans in the mornings; space plants a little wider to cut fungal disease.
- 3
May
Peak heat, about 36°C. Roll the curtains fully up, add shade only for sensitive crops, and irrigate early in the day.
- 4
January to March
The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.
Material changes worth specifying in Chennai
The standard 250-micron white diffused, UV-stabilised polyfilm is suitable to retain here. It spreads Chennai’s strong April sunlight evenly. White 50% shade net is also the appropriate standard choice in the material guide; Chennai’s sunlight does not call for a reflective net as a default. A second net layer is optional only for shade-loving crops, because extra layers can reduce useful light and restrict the open feel needed in humid weather.
For the five humid months, add air circulation fans where the crop and layout justify them. They do not replace roof vents and roll-up curtains, but they help move air through the canopy when humidity is high. Keep FRP doors, and include an entry cabin if insect hygiene matters for the crop: a double-door entry reduces the chance of whitefly and thrips entering as people walk in.
GI gutter sheet and funnels should remain in the specification. Their value is especially clear before November, the wettest month. Site drainage and the final orientation should be reviewed as part of the project design, but no material choice removes the need to clean gutters before the northeast monsoon period.
- Keep: 250-micron white diffused roof film.
- Keep: white 50% shade net and FRP doors.
- Consider: air-circulation fans for humid-month crop management.
- Include: entry cabin for stronger insect exclusion.
- Keep and maintain: GI gutters and funnels.
| Part | Standard kit | For Chennai | Why |
|---|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Keep | Spreads April's 6.5 kWh/m²/day of sunlight evenly |
| Shade net | White 50% | Keep white 50% | Sunlight here does not call for a reflective net |
| Second net layer | None | Optional | Only for shade-loving crops |
| Air circulation | Roof vent + curtains | Air Circulation Fan | 5 humid months: moving air keeps leaves dry |
| Doors | FRP (fibre) doors | Keep FRP | FRP lasts well in this climate |
| Gutters | GI gutter sheet + funnels | Keep | November brings ~292 mm; clean before October |
| Entry cabin | Optional | Include | A double door keeps whitefly and thrips out when people walk in |
The Chennai NVPH kit: what is supplied
Polyhouse Constructions, a venture of Kryzen Biotech Pvt Ltd, manufactures complete NVPH material kits: GI structure, polyfilm, nets and fittings. The reference table below shows the largest items in a 20 × 24 m kit. That kit has 67 items in all and about 2.5 tonnes of steel and fittings; the online kit builder gives every line, quantity, weight and current rate for the exact span and bay selected.
The listed reference kit includes side hockey members, small columns, big bottom members, hockey runners and big arcs. It also includes 250-micron white diffused film in 4.5 m and 5.5 m widths, side insect net, side skirting apron, white 50% shade net, aluminium profile, GI springs, four manual gear roll-up curtain units, two fibre doors and F brackets.
Our GI pipes use ISI-marked branded steel from Tata, Jindal and JSW. The GI structure has a 15-year manufacturing warranty, polyfilm has a 2.5-year warranty and nets have a 3-year warranty. Material is manufactured at Degaon, Pune–Bangalore Highway, Tal. Wai, Satara; dispatch delivery to Chennai is stated as 4 days after dispatch. Erection is done by Kryzen Biotech’s construction team, not by a Chennai office.
- Build a complete kit online or buy individual items.
- Receive a technical data sheet for every product, a lab test certificate with dispatch and a 32-point QA check.
- Use manual roll-up curtains to make the seasonal vent routine practical.
| Group | Item | Quantity | Weight |
|---|---|---|---|
| GI structure | Side Hockey (60X2.0X5500) | 22 nos | 378 kg |
| GI structure | Small Column (76X2.0X4500) | 18 nos | 305 kg |
| GI structure | Big Bottom (60X2.0X8000) | 8 nos | 200 kg |
| GI structure | Hockey Runner (42X2.0X4000) | 18 nos | 150 kg |
| GI structure | Big Arc (42X2.0X5200) | 12 nos | 130 kg |
| Film & nets | Polyfilm White Diffused 250 Micron (4.5 m) | 158 mtr | — |
| Film & nets | Polyfilm White Diffused 250 Micron (5.5 m) | 73 mtr | — |
| Film & nets | Side Insect Net (5.2 m) | 90 mtr | — |
| Film & nets | Side Skirting Apron (1.5 m) | 90 mtr | — |
| Film & nets | White Shade Net 50% | 80 mtr | — |
| Fittings & accessories | Aluminium Profile | 500 mtr | — |
| Fittings & accessories | GI Spring | 900 mtr | — |
| Fittings & accessories | Manual Gear Roll Up Curtain Unit | 4 nos | — |
| Fittings & accessories | Fibre Door | 2 nos | — |
| Fittings & accessories | F Bracket | 24 nos | — |
This week’s material price and what it excludes
For a 20 × 24 m, 480 m² naturally ventilated polyhouse, this week’s material-only, ex-factory price including GST is ₹4,68,814, or ₹977/m². A 28 × 36 m, 1,008 m² kit is ₹8,59,963, or ₹853/m². For an approximately one-acre 52 × 76 m, 3,952 m² kit, the price is ₹28,99,897, or ₹734/m².
Freight to Chennai and erection are extra. The lower per-m² price at a larger size reflects sharing of gutters, end frames and doors. Rates follow weekly GI and plastic rates and are updated every Friday, so use the kit builder for the current design-specific bill. Booking is with 5% advance and 95% before dispatch; a 5% bulk discount applies on 10+ units of an item.
- Small: 20 × 24 m, 480 m² — ₹4,68,814 material including GST.
- Medium: 28 × 36 m, 1,008 m² — ₹8,59,963 material including GST.
- About 1 acre: 52 × 76 m, 3,952 m² — ₹28,99,897 material including GST.
| Size | Span × bay | Area | Material incl. GST | Per m² |
|---|---|---|---|---|
| Small | 20 × 24 m | 480 m² | ₹4,68,814 | ₹977 |
| Medium | 28 × 36 m | 1,008 m² | ₹8,59,963 | ₹853 |
| About 1 acre | 52 × 76 m | 3,952 m² | ₹28,99,897 | ₹734 |
Price your own size for Chennai
Choose span and bay and get the full list with quantities, weights and rates in a minute.
Choose crops around ventilation and nearby price seasons
For a Chennai NVPH, select a crop first on its humidity tolerance and management capacity, then use nearby mandi seasons as one input for planting dates. The available price data covers markets in Chengalpattu, Thiruvallur, Tiruvarur, Vellore, Kancheepuram and Chittor, including Chengalpet, Nanganallur, Medavakkam, Guduvancheri and Pallavaram Uzhavar Sandhais. It is historical modal-price information, not a price guarantee.
Beans have the highest listed month in May at ₹6,375/q, but May also requires full ventilation. Green chilli peaks in August at ₹5,416/q, while bitter gourd peaks in July at ₹5,488/q; both months need attentive rain and disease management. Brinjal’s highest listed month is June at ₹4,666/q. These crops can suit growers who are ready to monitor curtains and crop health through monsoon build-up.
For harvest opportunities in the wetter end of the year, tomato is highest in December at ₹3,671/q, okra in December at ₹4,938/q, bottle gourd in December at ₹3,201/q and snake gourd in December at ₹4,083/q. Coriander leaves show their highest listed month in October at ₹5,761/q, precisely when humidity is 80%, so it needs careful airflow and disease attention. Ridge gourd is highest in January at ₹4,848/q, during the milder period.
- For long protected-crop cycles: consider tomato, with strong ventilation in humid months.
- For fast, closely managed crops: assess beans, chilli and gourds against labour and disease-control capacity.
- Do not plan solely for a peak month; compare planting date, crop duration and the humidity period.
| Crop | Markets | Average modal price | Highest month | Lowest month |
|---|---|---|---|---|
| Beans | 59 | ₹5,446/q | May (₹6,375) | Feb (₹4,554) |
| Tomato | 71 | ₹2,605/q | Dec (₹3,671) | Mar (₹1,618) |
| Green chilli | 59 | ₹4,706/q | Aug (₹5,416) | Apr (₹3,764) |
| Okra (bhindi) | 58 | ₹3,983/q | Dec (₹4,938) | Oct (₹3,405) |
| Bottle gourd | 58 | ₹2,808/q | Dec (₹3,201) | Apr (₹2,307) |
| Brinjal | 60 | ₹4,041/q | Jun (₹4,666) | Mar (₹3,194) |
| Snake gourd | 58 | ₹3,515/q | Dec (₹4,083) | Apr (₹3,034) |
| Bitter gourd | 56 | ₹4,654/q | Jul (₹5,488) | Apr (₹3,575) |
| Ridge gourd | 57 | ₹4,404/q | Jan (₹4,848) | Apr (₹3,971) |
| Coriander (leaves) | 52 | ₹4,547/q | Oct (₹5,761) | Jan (₹3,636) |
NVPH or fan and pad in Chennai?
For Chennai, naturally ventilated construction is usually the more appropriate starting point. It cools through roof vents and side curtains without power consumption for cooling. The fan-and-pad option uses exhaust fans and wet pads, adding electricity for fans and a pump. The climate information specifically indicates that pad cooling does not work here, and high humidity from September to January limits the benefit of evaporative cooling.
The material-price comparison for an approximately one-acre size shows NVPH at ₹28,99,897, or ₹734/m², and fan and pad at ₹32,48,775, or ₹822/m². That is a material comparison, not a complete project cost. Fan and pad is therefore rarely worth it at Chennai humidity; invest first in a well-designed NVPH, usable curtain operation, gutters, insect protection and, where needed, circulation fans.
NVPH suits crops such as capsicum, cucumber, tomato and flowers in the comparison. Actual crop choice should still be matched to the grower’s market route, crop knowledge and ability to keep humidity from accumulating around the canopy.
- NVPH: roof vent and side curtains; no cooling power use.
- Fan and pad: exhaust fans plus wet pads; power needed for fans and pump.
- Chennai: high humidity reduces the case for pad cooling.
| Naturally ventilated | Fan & pad | |
|---|---|---|
| Cooling | Roof vent and side curtains (no power) | Exhaust fans and wet pads |
| Running cost | None for cooling | Electricity for fans and a pump |
| Material price, 1 acre | ₹28,99,897 (₹734/m²) | ₹32,48,775 (₹822/m²) |
| Suits in Chennai | Capsicum, cucumber, tomato, flowers | Rarely worth it at this humidity |
Ordering material and planning the build
Start by fixing the crop, area and intended planting period. Use the online builder at polyhouseconstructions.com to see the full item list and the week’s rate for the selected size. The engineering and manufacturing are in-house, with parts cut and drilled to drawing; Kryzen Biotech’s construction team handles erection.
For a project within subsidy routes, verify the current position with the Tamil Nadu horticulture department before starting. MIDH/NHM is stated as 50% of the cost norm up to 4,000 m² per beneficiary. For NHB commercial projects above 2,500 m², an In-Principle Approval from NHB is needed before starting; norms and eligibility can change.
Chennai is supplied from the Satara factory, rather than a town office. This makes it important to finalise the design, all ventilation choices and rain-related additions before dispatch, so the material schedule and erection plan are aligned.
- Confirm crop and layout before generating the kit.
- Finalise fans, entry cabin and curtain operation requirements before dispatch.
- Arrange erection through Kryzen Biotech’s construction team.
Subsidy for a project in Chennai
Which scheme fits your size, a worked example and the steps to apply.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Will a naturally ventilated polyhouse handle Chennai’s May heat?
It can manage heat by keeping side curtains fully rolled up as conditions permit and keeping roof vents open, but it is not an air-conditioned structure. May averages 35.9°C, so early irrigation and crop-appropriate shade management are important.
What should I do in Chennai’s rainy and humid months?
Prepare gutters, funnels, film and GI springs before October, because November averages about 292 mm rain. From September to January, open side curtains whenever rain is not entering and use circulation fans in the morning where provided to help leaves dry.
Is fan and pad better than NVPH in Chennai?
Usually no. The available climate guidance says pad cooling does not work here, and Chennai’s September–January humidity reduces the benefit of evaporative cooling; fan and pad also needs electricity for fans and a pump.
What is the price of a 20 × 24 m NVPH material kit?
This week’s listed material-only ex-factory price including GST is ₹4,68,814 for 480 m², or ₹977/m². Freight to Chennai and erection are extra, and weekly material rates are updated every Friday.
Which crops can I evaluate for a Chennai NVPH?
Tomato, beans, green chilli, brinjal, gourds and okra have nearby mandi price data, while capsicum, cucumber, tomato and flowers are listed as NVPH-suited crops. Match crop duration to the humid September–January period rather than choosing only by the highest historical mandi month.
NVPH materials near Chennai
Neighbouring towns on the same delivery route, and how their summers compare.
| Town | From Chennai | Hottest month | Humid months | Suits |
|---|---|---|---|---|
| NVPH materials in Thiruvottiyur | ~10 km | May, 36°C | 5 | NVPH |
| NVPH materials in Ambattur | ~20 km | May, 36°C | 5 | NVPH |
| NVPH materials in Avadi | ~20 km | May, 36°C | 5 | NVPH |
| NVPH materials in Pallavaram | ~30 km | May, 36°C | 5 | NVPH |
| NVPH materials in Ponneri | ~40 km | May, 36°C | 5 | NVPH |
| NVPH materials in Nandivaram-Guduvancheri | ~50 km | May, 36°C | 5 | NVPH |
