How it worksBuy individual items

NVPH materials · Aravalli district, Gujarat

Naturally Ventilated Polyhouse Materials Seller in Modasa

By Editorial Team, Kryzen Biotech · Updated 12 November 2026

A naturally ventilated polyhouse (NVPH) needs no fans or pads: warm air leaves through the roof vent and fresh air comes in through roll-up side curtains. Whether that is enough depends on the weather, so this page works through Modasa's numbers — May afternoons of about 43°C, 766 mm of rain a year and humid air from July to September — and the NVPH material we would send for them.

Hottest month
May, ~43°C
Humid (75%+)
3 months
NVPH material, 1 acre
₹734/m²
Delivery
~3 days
Naturally ventilated polyhouse built with our material, like those we supply to Modasa
A naturally ventilated polyhouse: roof vent along the ridge, roll-up curtains on the sides.

How natural ventilation copes with Modasa's weather

In May the air is dry enough (32% humidity) for an NVPH to vent well, but afternoons of 43°C are hard on leafy crops. Most growers here run an NVPH for capsicum, cucumber and flowers and add shade net in peak summer; for greens through May, compare with a fan and pad house below.

MeasureModasaGujarat average (74 towns)What it means for the NVPH
Hottest-month high43°C (May)40.5°C2.5°C hotter than the state average
Humidity in that month32%45%Dry air vents easily
Rain a year766 mm894 mm128 mm less than the state average
Town figures are NASA POWER monthly averages; state averages are across the towns we list in that state.
How air moves through a naturally ventilated polyhouse in Modasa
Cool air enters through the side curtains; warm air leaves through the roof vent.

NVPH material list: 28 × 36 m in Modasa

To make it concrete, here is the material for a 28 × 36 m NVPH (1,008 m²), a common size for growers around Modasa. Each item links to its product page with specifications and this week's rate.

GroupItemQuantityWeight
GI structureSmall Column (76X2.0X4500)36 nos609 kg
GI structureSide Hockey (60X2.0X5500)32 nos549 kg
GI structureBig Bottom (60X2.0X8000)21 nos524 kg
GI structureBig Arc (42X2.0X5200)27 nos292 kg
GI structureGI Gutter Sheet70 mtr—
Film & netsPolyfilm White Diffused 250 Micron (4.5 m)255 mtr—
Film & netsPolyfilm White Diffused 250 Micron (5.5 m)138 mtr—
Film & netsSide Insect Net (5.2 m)130 mtr—
Film & netsSide Skirting Apron (1.5 m)130 mtr—
Film & netsWhite Shade Net 50%192 mtr—
Fittings & accessoriesAluminium Profile836 mtr—
Fittings & accessoriesGI Spring1,425 mtr—
Fittings & accessoriesF Bracket54 nos—
Fittings & accessoriesClamps 60 mm Half358 nos—
Fittings & accessoriesSelf Drilling Screw1,881 nos—
The largest items of a 28 × 36 m kit (67 items in all, about 4.8 tonnes of steel and fittings). The kit builder shows every line for your exact size.

Twelve months of weather in Modasa

May is the hottest month, with afternoons around 42.8°C; January nights drop to about 11°C. July is the wettest (275 mm of 766 mm a year), and humidity stays at 75% or more for 3 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Nov, Dec.

MonthAfternoon highNight lowHumidityRainSun (kWh/m²/day)Wind (m/s)
Jan28.1°C11°C30%1 mm4.52.2
Feb31.7°C13.9°C25%1 mm5.42.2
Mar36.5°C18.8°C22%5 mm6.52.2
Apr41°C23.4°C23%4 mm7.22.4
May42.8°C26.6°C32%5 mm7.43.4
Jun38.9°C27.6°C53%86 mm6.23.8
Jul33.1°C25.3°C76%275 mm4.43.4
Aug30.7°C24°C85%261 mm4.12.7
Sep31.6°C23°C80%115 mm5.11.8
Oct33.3°C19.8°C59%8 mm5.51.4
Nov31.7°C15.9°C44%4 mm4.61.7
Dec28.9°C12.4°C35%1 mm4.22
NASA POWER long-term monthly averages for Modasa (23.46, 73.30).

What NVPH material costs this week

SizeSpan × bayAreaMaterial incl. GSTPer m²
Small20 × 24 m480 m²₹4,68,814₹977
Medium28 × 36 m1,008 m²₹8,59,963₹853
About 1 acre52 × 76 m3,952 m²₹28,99,897₹734
This week's GI and plastic rates, material only, ex-factory. Freight to Modasa and erection are extra. Larger houses cost less per m² because gutters, end frames and doors are shared.

Price your own size for Modasa

Choose span and bay and get the full list with quantities, weights and rates in a minute.

Build your NVPH kit →

Changes we would make for Modasa

The standard kit suits most of India. For Modasa's weather we would adjust a few items — here is the standard choice, what we would pick instead, and why.

PartStandard kitFor ModasaWhy
Roof film250-micron white diffused polyfilmKeepSpreads May's 7.4 kWh/m²/day of sunlight evenly
Shade netWhite 50%Aluminium Shade Net (4 m)Reflects heat back out at 43°C
Second net layerNoneAdd (double layer)Open or close it by the season with ropes and pulleys
Air circulationRoof vent + curtainsKeepNatural airflow is enough
DoorsFRP (fibre) doorsKeep FRPFRP lasts well in this climate
GuttersGI gutter sheet + funnelsKeepJuly brings ~275 mm; clean before June
Entry cabinOptionalIncludeA double door keeps whitefly and thrips out when people walk in

A season-by-season NVPH plan for Modasa

MonthJanFebMarAprMayJunJulAugSepOctNovDecDetail
Peak heat~43°C highs
Strongest sun7.4 kWh/m²/day
Wettest month~275 mm
Humid (75%+)July–September
Nethouse seasonOctober–February
NASA POWER monthly averages for Modasa.
  1. 1

    Before July

    Clear gutters and funnels, check the film for tears and tighten the GI springs. July brings about 275 mm, the heaviest rain of the year.

  2. 2

    July to September

    Humidity stays at 75% or more. Keep side curtains open whenever it is not raining; space plants a little wider to cut fungal disease.

  3. 3

    May

    Peak heat, about 43°C. Roll the curtains fully up, close the shade net or second layer over the crop, and irrigate early in the day.

  4. 4

    October to February

    The dry, mild stretch. Open the house for maximum light, plan the main planting and do structural maintenance.

Crops for an NVPH in Modasa

Coloured capsicum for Modasa

Coloured capsicum

NVPH

Grow under shade net through May, when highs reach 43°C.

Cucumber (parthenocarpic) for Modasa

Cucumber (parthenocarpic)

NVPH

Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Gerbera and rose for Modasa

Gerbera and rose

NVPH

Cut flowers with year-round demand from city florists and events.

NVPH or fan & pad in Modasa?

Modasa is one of the towns where a fan and pad house can earn its running cost: dry May air lets wet pads take 43°C down to about 31°C. Choose it only if you grow crops that need that cooling.

Naturally ventilatedFan & pad
CoolingRoof vent and side curtains (no power)Exhaust fans and wet pads, ~31°C inside in May
Running costNone for coolingElectricity for fans and a pump
Material price, 1 acre₹28,99,897 (₹734/m²)₹32,48,775 (₹822/m²)
Suits in ModasaCapsicum, cucumber, tomato, flowersLeafy greens and crops needing tight control in summer

Subsidy and delivery

NVPHs qualify for 50% assistance on the government cost norm under MIDH, and larger commercial projects can apply to the National Horticulture Board.

Subsidy for a project in Modasa

Which scheme fits your size, a worked example and the steps to apply.

Read the subsidy guide →

Modasa is roughly 800 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Modasa in about 3 days, carrying the invoice, the test reports and 100% invoice insurance.

Modasa within Gujarat

Among the 74 towns we supply in Gujarat, Modasa ranks 19th for summer heat and 45th for yearly rain. Other Gujarat towns on our list:

Buy from India's biggest CEA manufacturing company

Choose your structure and size and get the complete material list, priced this week.

Build your kit →

FAQs

Is a naturally ventilated polyhouse enough for Modasa's summer?

For capsicum, cucumber, tomato and flowers, yes, with shade net in May. For leafy greens through May (43°C), a fan and pad house cools better because the air is dry.

What does NVPH material cost in Modasa?

This week about ₹734 per m² for an acre-sized house (₹28,99,897 incl. GST, material only, ex-factory). Smaller houses cost more per m². Freight and erection are extra.

Can I buy only the film or nets for an existing NVPH?

Yes. Film, nets, curtains and every fitting are sold individually on our Buy individual items page, at the same weekly rates.

What is included in the NVPH material kit?

The full GI structure (columns, arches, purlins, gutters, foundations), 250-micron diffused polyfilm, side insect net, roll-up curtains with gear units, aluminium profiles and springs, doors, and every clamp, bolt and coupler, counted for your size.

How long does delivery to Modasa take?

About 800 km by road from our Satara factory, so usually in about 3 days after dispatch.

Which steel is used?

ISI-marked GI pipes from Tata, Jindal or JSW steel, with a 15-year manufacturing warranty on the structure, 2.5 years on polyfilm and 3 years on nets.

NVPH materials near Modasa

Neighbouring towns on the same delivery route, and how their summers compare.

TownFrom ModasaHottest monthHumid monthsSuits
NVPH materials in Lunawada~60 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Kapadvanj~70 kmMay, 43°C3NVPH + fan & pad
NVPH materials in Vijapur~70 kmMay, 43°C2NVPH + fan & pad
NVPH materials in Gandhinagar~90 kmMay, 44°C2NVPH + fan & pad
NVPH materials in Mansa~90 kmMay, 43°C2NVPH + fan & pad
NVPH materials in Adalaj~100 kmMay, 44°C2NVPH + fan & pad

All towns: NVPH materials by town

Sources

  1. Kryzen: Polyhouse construction in Modasa
  2. Kryzen: Polyhouse farming in Modasa
  3. NASA POWER monthly climate averages for Modasa
  4. NHB cost norms for protected cultivation
Build your kit