రక్షిత సాగు కోసం గైడ్లు
పాలీహౌస్, నెట్ హౌస్, పంటలు మరియు వ్యవసాయ ప్రణాళికపై ఆచరణాత్మక సలహా.
Tomato Polyhouse Fertigation Schedule for Indian Crops
A tomato polyhouse fertigation schedule should change with crop stage, weather, water quality and fruit load. This guide gives practical EC, irrigation and nutrient-balance targets for soil-bed tomato crops in India.
Tomato Transplanting in Polyhouse: Bed and Planting-Day Checklist
Successful tomato transplanting in polyhouse starts with a moist, level bed, hardened and healthy seedlings, correct spacing, and drip lines checked before planting. This practical checklist helps you prepare the bed, plant without root stress and manage the critical first week.
Climate Settings for Coloured Capsicum in a Fan-Pad Polyhouse
Coloured capsicum performs best with moderate day temperatures, cool nights, steady air movement and controlled humidity. This checklist gives practical stage-wise settings for fan-pad polyhouses, plus actions for hot, humid and cool weather.
Coloured Capsicum Pruning Stages in Polyhouse
Coloured capsicum pruning in polyhouse starts with removing the crown flower and selecting two equal, healthy main stems. Thereafter, maintain those two leaders, remove weak or inward laterals early, and adjust fruit load to the plant’s vigour and climate.
Seedless Cucumber Nursery Management for Polyhouse: From Plug Tray to Transplanting
A uniform seedless cucumber crop starts with clean plug trays, correct moisture and seedlings transplanted at the right leaf stage. This guide explains how to raise parthenocarpic cucumber seedlings, including when grafting may be useful.
Cherry Tomato Pruning in Polyhouse: Single-Stem Training Guide
Cherry tomato pruning in a polyhouse keeps an indeterminate crop open, balanced and easy to harvest. This guide covers when to remove suckers, how to place clips, and how to maintain clean, marketable fruit clusters.
Cherry Tomato Fruit Cracking in Polyhouse: Causes and Prevention
Cherry tomato fruit cracking in a polyhouse usually follows a rapid change in water uptake: a dry root zone followed by heavy irrigation is the most common trigger. Humidity swings, high temperature, unbalanced fertigation and delayed harvest make the problem worse, but a regular crop routine can reduce losses sharply.
Seedless Cucumber Pollination in Polyhouse: Rules for Straight, Marketable Fruits
Parthenocarpic seedless cucumber hybrids set fruit without pollen, so they do not need bees, hand pollination or male plants. The key rule is to exclude pollinating insects and prevent pollen-producing cucumber plants from entering the crop, because stray pollination can create seeds and uneven fruits.
Best Polyhouse Orientation Direction for Sun and Wind
The best polyhouse orientation direction is not the same for every farm. Start with sunlight and seasonal prevailing wind, then adjust for ventilation, drainage, slope, shade and access before marking foundations.
Polyhouse Ridge Vent Design: Placement, Size and Rain Protection
A ridge vent lets hot, humid air leave from the highest point of a naturally ventilated polyhouse. It must be sized with the side vents, protected from driving rain and designed for the local wind and monsoon pattern.
How to Plan Polyhouse Row Direction for Uniform Light
Polyhouse row direction affects how evenly plants receive sunlight, especially in tall trellised crops such as tomato, cucumber and capsicum. Start with the structure’s fixed orientation, then align beds to balance light, airflow, drainage and easy movement.
Gothic Arch Polyhouse Design for Wind and Rain
A gothic arch polyhouse design has a steep, pointed roof crown that drains rainwater quickly and gives good internal height. But its wind performance depends on the complete engineered system: site wind, span, pipe sections, bracing, foundations, gutters and cover fastening.
Saw-Tooth Polyhouse Design: When Is It Suitable?
A saw-tooth polyhouse uses stepped roof ridges and continuous high-level vents to let accumulated hot air escape naturally. It is most suitable for large naturally ventilated houses in hot, humid locations, but only when site wind, rain protection and vent operation are planned properly.
How to Select Polyhouse Gutter Height Correctly
Polyhouse gutter height is the vertical distance from the finished inside floor level to the gutter or eave where two roof spans meet. Select it from your crop and trellis height first, then check ventilation, local heat and rainfall, roof profile, wind design and the added structural cost.
Fixed vs Open Ridge Vent Polyhouse: Which One Fits Your Farm?
A fixed ridge vent gives continuous passive ventilation with fewer moving parts, while an openable ridge vent lets you close the roof opening during rain, cold nights or strong winds. The better choice depends mainly on local rainfall, wind, crop sensitivity and how closely the house will be managed.
Polyhouse Ridge Height: How Much Is Needed for Your Crop and Span?
Polyhouse ridge height is the highest internal point of the roof. It should be selected together with span, gutter height, roof profile and ventilation design—not added as an isolated number.
Pre Harvest Pest Check Polyhouse: Checklist for Marketable Produce
A final crop walk before harvest helps separate saleable produce from damaged, diseased or residue-risk lots. Use this practical checklist to inspect fruits, leaves, flowers, packing areas and polyhouse entry points before picking starts.
Rainy Season Disease in Polyhouse: Monsoon Checklist for NVPH Growers
Monsoon disease control in a naturally ventilated polyhouse depends on keeping leaves dry, moving humid air, and removing water from inside and around the structure. Use this checklist before rain starts and after every prolonged wet spell to catch disease risks early.
Summer Pest Control in Nethouse: A Practical Prevention Checklist
Hot, dry weather can make whiteflies, thrips, mites and aphids multiply quickly in a nethouse. This checklist helps growers prevent flare-ups by tightening pest exclusion, scouting often and avoiding crop stress.
How to Choose a Polyhouse Roof Shape and Profile
The right polyhouse roof shape depends mainly on your rainfall, wind exposure, ventilation requirement and crop height. Gothic roofs suit many exposed and rainy sites, quonset roofs are simple for smaller structures, and saw-tooth roofs help remove heat from larger naturally ventilated houses.
How to Dispose of Infected Crop Waste in a Polyhouse Safely
Pest- or disease-affected crop waste can restart an outbreak if it is left in the polyhouse, added to an ordinary compost heap or carried uncovered through the farm. This guide gives a practical containment, removal and disposal process for Indian protected-cultivation farms.
Pesticide Spray Records for MRL Compliance: A Practical Farm System
A complete spray record connects every harvested lot to the crop block, pest observation, input used and pre-harvest interval. It helps protected-cultivation growers plan safe harvests, answer buyer questions and improve pest management over time.
MRL Pesticide Residue in Polyhouse Vegetables: Basics for Growers
Pesticide residues can affect whether polyhouse vegetables are accepted by organised buyers, exporters and testing laboratories. This guide explains MRLs in practical terms and shows how label compliance, crop monitoring and clear records reduce avoidable risk.
Types of Polyhouse Structure for Indian Farms: How to Choose
The right polyhouse structure depends first on your local temperature, humidity, wind, rainfall, crop and buyer requirements. Naturally ventilated structures suit many Indian farms, while saw-tooth, gothic and fan-and-pad formats solve specific climate and crop challenges.
