Climate Settings for Coloured Capsicum in a Fan-Pad Polyhouse
Polyhouse Constructions Agronomy Desk · 13 నవం, 2026
Coloured capsicum in a fan-pad polyhouse needs a day temperature of roughly 22–28°C, a night temperature of 16–20°C and relative humidity (RH) mostly around 60–70%. During flowering, aim nearer the cool end of this range and prevent RH from staying above 75–80%. This protects pollen release, fruit set and fruit quality.
Do not run the pad just because the afternoon is hot. Use it when it can lower inside temperature without making the house excessively humid. Fans, side openings where available, and horizontal air circulation must keep the crop dry and the climate even from the pad end to the fan end.
Stage-wise climate target chart
Use these as operating targets, not fixed promises. Actual settings depend on cultivar, plant load, outside weather, crop age and your local market season. Measure temperature and RH at crop canopy height, not only near the controller or roof.
Crop stage | Typical crop period | Day target | Night target | RH target | Main climate priority |
|---|---|---|---|---|---|
Nursery and hardening | Before transplanting | 22–26°C | 18–20°C | 65–75% | Strong, hardened seedlings; no soft growth |
Establishment | 0–2 weeks after transplanting | 23–28°C | 18–20°C | 65–75% | Root recovery without water stress |
Vegetative growth | 2–5 weeks after transplanting | 23–28°C | 18–20°C | 60–70% | Balanced leaf area and stem growth |
Flowering and fruit set | First flowers onwards | 21–26°C | 16–19°C | 55–70% | Pollen release and fruit retention |
Fruit filling | Developing fruit | 22–27°C | 17–20°C | 60–70% | Steady fruit size, calcium movement |
Colour development and harvest | Mature green to red/yellow/orange | 20–26°C | 16–18°C | 55–65% | Even colour, firm fruit and lower disease risk |
A short rise above these targets may not damage the crop. The problem starts when stressful conditions continue for several hours each day or repeat over many days. In particular, temperatures above about 30–32°C during flowering can reduce fruit set. Long humid nights can increase condensation and disease risk.
The daily checklist for fan-pad operation
Walk the house at least twice daily: once in the morning and once during the hottest part of the afternoon. A quick check near the pad and another near the exhaust fans is important. Conditions can vary across a long house.
Morning: prepare the crop before heat builds
- Record outside and inside temperature and RH before 9 am.
- Check whether leaves are dry. Persistent wetness in the morning means night ventilation or air circulation was inadequate.
- Ensure pad water supply, pump, filters and drainage are working. A clogged pad cools unevenly.
- Check that exhaust fan shutters open fully and belts or motors are running correctly.
- Start air-circulation fans early enough to avoid still, humid pockets inside the canopy.
- Look for condensation on polyfilm, gutters, trellis wires and leaves. Increase moisture removal on the following night if this is regular.
- Check the crop near doors, sidewalls, pad and fan end. These are the first places where climate imbalance appears.
Midday: control heat without over-humidifying the house
- Switch on exhaust fans in stages as inside temperature rises above the crop target.
- Start pad wetting only when fan ventilation alone cannot hold a suitable temperature.
- Keep an eye on RH after pad operation starts. If RH approaches 75–80%, continuous pad wetting may create more risk than benefit, especially in monsoon weather.
- Confirm that cooled air reaches the fan end. Wilting or curled leaves at the far end can indicate poor airflow, blocked fan shutters or insufficient fan capacity.
- Avoid a very cold air stream directly on young plants near the pad. Uniformity matters more than one very low temperature reading.
- If the crop is flowering, give extra attention to conditions from late morning to early afternoon. This is when high temperature and high RH can affect pollen shed.
Evening and night: remove humidity early
- Stop pad wetting once outside temperature falls and cooling is no longer needed.
- Do not close the house so tightly that RH rises sharply after sunset.
- Maintain air circulation at canopy level to prevent a wet boundary layer around leaves and fruit.
- Use a suitable combination of minimum exhaust ventilation and available vents or curtains to remove moisture, especially after an irrigation-heavy day.
- Inspect leaf undersides and fruit shoulders the next morning for condensation-related problems.
The exact automation logic differs by location and equipment. Use a reliable temperature-RH sensor and verify it periodically with a second instrument. One faulty sensor can lead to unnecessary pad operation, poor fruit set or excess electricity use.
Settings that matter most at flowering
Flowering and early fruit set are the most climate-sensitive stages in coloured capsicum. Aim for 21–26°C in the day, 16–19°C at night and 55–70% RH. A practical target for the middle of the day is often about 60–65% RH, if your local weather allows it.
Very high RH makes pollen sticky and less likely to shed properly. Very low RH, particularly along with high temperature, can dry the stigma and increase plant water stress. Both conditions can lead to poor set, misshapen fruit or flower drop.
During a hot, dry spell
In dry summer conditions, the pad can be effective. Start fan ventilation first and use pad wetting in intervals or stages as needed. The objective is a stable crop climate, not maximum wetting of the pad.
Take these actions when the canopy remains hot:
- Check that all fans are operating and shutters are clear.
- Check pad wetting uniformity across its full length.
- Confirm that there are no large air leaks or open doors that short-circuit airflow.
- Keep irrigation timing suitable for the crop demand, but avoid sudden heavy irrigation solely to correct midday wilt.
- If sunlight is extreme, use the shade strategy designed for the structure and season. Do not permanently over-shade the crop, as low light reduces yield and colour quality.
A fan-pad system commonly cools incoming air substantially in dry heat, but the actual drop depends on outside RH, pad condition, airflow, water quality and house design. In a humid spell, the temperature reduction can be much smaller.
During monsoon or humid weather
Monsoon management is different. Outside RH may already be high, so wetting the cellulose pad can push indoor humidity too high. Prioritise moisture removal and airflow.
- Run exhaust fans as needed for air exchange and use circulation fans to eliminate dead zones.
- Use the pad only when its cooling benefit is clearly required.
- Avoid late-day over-irrigation. Wet media and a humid night create a long leaf-wetness period.
- Remove diseased leaves and fallen fruit promptly; do not leave plant debris in the house.
- Keep drainage channels open so water does not stand near beds or growbags.
For a clearer overview of equipment and airflow principles, see what a fan and pad polyhouse is.
Humidity, dew point and leaf wetness
Relative humidity is useful, but the crop responds strongly to condensation and leaf wetness. When warm, moist indoor air touches a cooler leaf or roof surface at night, water can condense. This raises the risk of foliar diseases and fruit rots.
A practical warning level is RH above 80% for long periods, especially at night. You may also see droplets on the inner polyfilm, wet leaf tips in the morning, or a musty smell in dense crop rows. Act before disease symptoms spread.
Keep the canopy open according to your crop-management plan. Dense foliage blocks airflow and makes any fan-pad system less effective at leaf level. Regular pruning and training are therefore climate tools as well as crop-management jobs. Follow this coloured capsicum pruning stages guide alongside your climate routine.
Avoid swinging from very humid to very dry conditions within a few hours. Wide fluctuations can stress the crop and disturb water and calcium movement to developing fruit. This can contribute to quality defects, though nutrition, irrigation uniformity and root health also play major roles.
Air movement and uniformity inside the house
Exhaust fans draw air through the wet pad, but this does not guarantee uniform canopy conditions. The pad end can be cooler and more humid, while the fan end can be warmer and drier. Large structures may show a clear temperature gradient.
Use horizontal air-circulation fans to mix air gently through and above the crop canopy. The goal is movement without a harsh direct draft on flowers and tender shoots. Place and operate fans according to the greenhouse layout and engineering plan.
Check uniformity with readings at three locations:
Location | What to check | Likely issue if it differs sharply |
|---|---|---|
Near pad | Excess cold air, high RH, wet foliage | Too much pad wetting or direct air stream |
Centre of house | Representative crop-climate reading | Sensor should normally be near this zone |
Near exhaust fans | Higher temperature, wilt, dry air | Weak airflow, blocked fan, too much crop resistance |
A difference of a few degrees across the house can occur on a hot day. But if crop symptoms differ consistently by zone, investigate the air path, curtains, insect net cleanliness, fan performance and crop density.
For replacement or planned maintenance, exhaust fans, cellulose pads and air-circulation fans should be selected to match the house design rather than bought only by unit size.
Seasonal operating approach in India
Peak summer
The first target is to prevent repeated severe heat stress. Begin ventilation before the house gets too hot, then bring in pad cooling progressively. Maintain adequate root-zone moisture, as high vapour demand can cause rapid afternoon wilting even when soil or media appears moist.
Check water quality and pad scaling regularly. Mineral deposits reduce wetting and reduce cooling efficiency. Clean and maintain equipment as per the supplier’s instructions.
Monsoon
Focus on humidity management, disease sanitation and drainage. Avoid treating the pad as the default cooling tool. Whenever outdoor weather permits, exchange humid indoor air and maintain crop-level circulation.
Winter and cool nights
Coloured capsicum needs cool but not excessively cold nights. If night temperature repeatedly falls below about 14–15°C, growth slows, nutrient uptake can weaken and fruit development may be delayed. Avoid cold drafts on the crop. Manage curtains and ventilation carefully so that you retain sufficient warmth without trapping humid air.
Transition months
March–April and September–October can bring sharp weather changes. Review set points weekly, not only once per crop. A setting that worked in dry March may create excessive humidity after a pre-monsoon shower or during early monsoon conditions.
Common climate mistakes and their correction
Symptom or situation | Common climate cause | First correction |
|---|---|---|
Flower drop or poor fruit set | Hot afternoons, prolonged high RH, weak airflow | Check temperature/RH during flowering hours and improve ventilation uniformity |
Condensation at dawn | Humid night with inadequate air exchange | Stop pad earlier; use night moisture-removal ventilation and circulation |
Pad-end plants look soft or wet | Cold, humid incoming air concentrated near pad | Check pad wetting cycle and air distribution |
Fan-end plants wilt first | Poor airflow or hotter, drier fan-end climate | Inspect fans, shutters, crop blockage and sensor placement |
Slow colour development | Low light, unsuitable temperature, excess crop load or variety effect | Review canopy, temperature trend and harvest planning |
Uneven fruit size | Climate variation plus irrigation or root-zone variation | Compare zones, irrigation output and drainage before changing fertiliser |
Do not diagnose every issue as a climate problem. Root-zone EC, irrigation frequency, disease, pest pressure, plant load and cultivar also influence fruit set and quality. Use climate records together with irrigation records and crop observations.
Next steps
Create a simple daily sheet with inside temperature, RH, outside weather, fan and pad runtime, irrigation timing and crop observations. After two to three weeks, this record will show which set points work in your structure and season.
Before a new project or equipment upgrade, compare the crop requirement with the system design in NVPH versus fan and pad. If you need a material list matched to your planned structure, use the online kit builder with live weekly rates. Polyhouse Constructions supplies complete material kits and individual protected-cultivation components; erection is handled by Kryzen Biotech’s construction team.
Frequently asked questions
What is the best temperature for coloured capsicum in a fan-pad polyhouse?
For most of the crop, keep daytime temperature around 22–28°C and night temperature around 16–20°C. During flowering, target a slightly cooler day range of about 21–26°C where possible, because prolonged heat reduces fruit set.
What humidity should I maintain for coloured capsicum flowering?
Keep RH generally between 55% and 70% during flowering, with around 60–65% often a useful practical target. Avoid RH staying above 75–80%, as pollen shedding and disease management become more difficult.
Should the cooling pad run continuously in summer?
Not necessarily. Run exhaust fans first and add pad wetting when fan ventilation alone cannot maintain a safe crop temperature. Continuous pad operation can create excessive humidity, particularly after rain or in humid regions.
Why are capsicum flowers dropping despite a fan-pad system?
Check the actual climate at canopy level during late morning and afternoon, not just the controller display. High temperature, prolonged humidity, poor airflow, water stress and crop load can all contribute, so inspect each factor together.
How can I reduce condensation in a capsicum polyhouse at night?
Stop pad wetting before evening cooling begins, maintain gentle air circulation and remove humid air with suitable minimum ventilation. Also avoid over-irrigating late in the day and keep the canopy open enough for air to move through it.
