Equipment · Coimbatore district, Tamil Nadu
Protected Cultivation Equipment Supplier in Valparai
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
The frame and film make a polyhouse; the equipment makes it work. For growers in Valparai we supply every piece from one factory: air circulation fans, manual gear units for roll-up curtains, shade and insect nets, gutters, doors and the clamps and couplers that hold it all. This page sorts them by what Valparai's climate asks for first.
- Pad cooling
- Limited here
- Humid months
- 8
- Shading need
- Low
- Delivery
- ~4 days

What Valparai's climate asks of the equipment
| Need | For Valparai | Why |
|---|---|---|
| Cooling | Shade net + open curtains | 58% humidity limits pad cooling |
| Air movement | Air circulation fans | Humid from May to December |
| Shading | White 50% net | Sun peaks at 6.2 kWh/m² in March |
| Rain | Wide gutters, funnels, skirting apron | October: ~249 mm |
| Nights | Curtains that close fully | 1,193 m above sea level |
Ventilation and insect control
Roll-up curtains and insect net let a naturally ventilated house breathe without letting pests in.
Local market prices for polyhouse crops near Valparai
Prices at the mandis in Coimbatore district follow a clear yearly pattern. Coriander (leaves) is the extreme case, from ₹3,084 per quintal in January up to ₹7,790 in October (153% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Beans | 18 | ₹5,808/q | May · ₹6,768 | Feb · ₹4,446 | 52% |
| Green chilli | 18 | ₹4,817/q | Jun · ₹5,634 | Apr · ₹3,709 | 52% |
| Okra (bhindi) | 18 | ₹4,543/q | Dec · ₹5,513 | Jun · ₹3,836 | 44% |
| Bottle gourd | 18 | ₹2,577/q | Dec · ₹3,490 | Mar · ₹1,956 | 78% |
| Coriander (leaves) | 18 | ₹5,244/q | Oct · ₹7,790 | Jan · ₹3,084 | 153% |
| Snake gourd | 18 | ₹3,430/q | Oct · ₹3,851 | Mar · ₹2,884 | 34% |
| Ridge gourd | 18 | ₹4,772/q | Dec · ₹5,464 | Mar · ₹4,122 | 33% |
| Papaya | 18 | ₹3,305/q | Sep · ₹3,943 | Jun · ₹2,702 | 46% |
When to plant in Valparai for the best prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, beans peaks in May; at about 50 days to first harvest, transplant in March.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Beans | May, Jun, Jul, Aug | ~50 | March | Feb |
| Green chilli | Jun, Jul, Aug, Sep, Oct | ~75 | March | Apr |
| Okra (bhindi) | Jan, Dec | ~45 | October | Jun |
| Bottle gourd | Dec | ~55 | October | Mar |
| Coriander (leaves) | May, Oct | ~35 | August | Jan |
| Snake gourd | Aug, Sep, Oct, Nov, Dec | ~55 | August | Mar |
| Ridge gourd | Jan, Jun, Jul, Dec | ~50 | October | Mar |
Valparai month by month
March is the hottest month, with afternoons around 34.3°C; January nights drop to about 16.3°C. October is the wettest (249 mm of 1,558 mm a year), and humidity stays at 75% or more for 8 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 29.1°C | 16.3°C | 70% | 8 mm | 5.5 | 1.3 |
| Feb | 32.4°C | 17.7°C | 59% | 15 mm | 6.1 | 1.3 |
| Mar | 34.3°C | 20.3°C | 58% | 37 mm | 6.2 | 1.1 |
| Apr | 33.4°C | 21.9°C | 68% | 79 mm | 5.9 | 1.1 |
| May | 29.8°C | 21.9°C | 80% | 162 mm | 5.3 | 1.7 |
| Jun | 26.8°C | 21.2°C | 88% | 243 mm | 4.3 | 2.3 |
| Jul | 25.8°C | 20.6°C | 89% | 227 mm | 4.1 | 2.3 |
| Aug | 25.9°C | 20.4°C | 90% | 194 mm | 4.4 | 2.1 |
| Sep | 26.5°C | 20.2°C | 89% | 172 mm | 5 | 1.7 |
| Oct | 26.9°C | 20.1°C | 88% | 249 mm | 4.8 | 1.2 |
| Nov | 26.6°C | 19°C | 86% | 140 mm | 4.7 | 1.1 |
| Dec | 26.9°C | 17.2°C | 81% | 32 mm | 4.9 | 1.4 |
Cooling and air movement
8 humid months: moving air dries leaves and cuts disease.
Gutters and rain handling
October brings about 249 mm; gutters and skirting must carry it away.
Film and shade nets
Diffused film spreads light; nets add shade where crops need it.

Polyfilm White Diffused 250 Micron (4.5 m)
₹254 per metre + GST
Used in: NVPH, Fan & Pad

White Shade Net 50%
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Aluminium Shade Net (4 m)
₹315 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse (optional upgrade)

Green Shade Net 50%
₹27 per metre + GST
Used in: Square Nethouse, Curved Nethouse (optional upgrade)
Doors and entry
Heavy rain and humidity: aluminium doors do not swell or warp.
Frame fittings
Clamps, couplers and springs hold the frame and film; we count every one for your size.

Clamps 60 mm Full
₹17 per piece + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Four Way Pipe Coupler (48 OD)
₹130 per piece + GST
Used in: Square Nethouse

Aluminium Profile
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

GI Spring
₹6 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse
Why we rarely fit fan and pad in Valparai
At 58% humidity in March, wet pads would cool Valparai's air only a few degrees, so we rarely recommend fan and pad here. Better value: open roll-up curtains, white shade net, and air circulation fans in the humid months.
An equipment care calendar for Valparai
- 1
Before October
Clear gutters and funnels, re-seat the side skirting apron and check film tension; October brings about 249 mm.
- 2
May to December
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 3
January to April
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
- 4
Cold months
At 1,193 m, check that curtains close fully and doors seal, to hold warmth at night.
Which equipment each system uses
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Tested, certified and under warranty

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Valparai.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Delivery and spares in Valparai
We dispatch from Degaon near Satara, about 1,180 km from Valparai by road. Expect the material in about 4 days after dispatch; share the farm PIN code and the access road so we send a vehicle that can reach the site.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Valparai and the rest of Coimbatore district
Valparai is one of the cooler towns in Tamil Nadu (118th hottest of 119), and among the wettest (3rd for rain). We also supply 2 other towns in Coimbatore district.
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Do you supply polyhouse equipment in Valparai?
Yes. We dispatch from our Satara factory, about 1,180 km from Valparai, and the truck usually arrives in about 4 days.
Does fan and pad cooling work in Valparai?
Not well. At 58% humidity in March, pads cool only a little; a naturally ventilated house with shading and air circulation fans is better value.
Are the exhaust fans and pads sold separately?
Yes. Exhaust fans, cellulose pads and pad frames can be bought individually, for a new fan and pad house or to replace old pads.
What warranty do you give?
GI structure 15 years, polyfilm 2.5 years, nets 3 years.
Can I get lab test reports?
Yes. Tensile, chemical analysis, salt spray, cupping and pull-out tests by third-party labs can be added to any order; reports come with the delivery.
Do you install the equipment?
We supply material and equipment. Kryzen Biotech’s construction team can build the structure; see polyhouse construction in your town on the Kryzen blog.
Equipment supply near Valparai
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Valparai | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Pollachi | ~50 km | Limited | 8 | Mar, 36°C |
| Equipment supplier in Chittur-Thathamangalam | ~60 km | Limited | 8 | Mar, 37°C |
| Equipment supplier in Udumalaipettai | ~60 km | Limited | 5 | Apr, 37°C |
| Equipment supplier in Muvattupuzha | ~70 km | Limited | 8 | Mar, 37°C |
| Equipment supplier in Perumbavoor | ~70 km | Limited | 8 | Mar, 33°C |
| Equipment supplier in Thodupuzha | ~70 km | Limited | 8 | Mar, 36°C |












