Equipment · Bhandara district, Maharashtra
Protected Cultivation Equipment Supplier in Pauni
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
The frame and film make a polyhouse; the equipment makes it work. For growers in Pauni we supply every piece from one factory: exhaust fans and cellulose pads for evaporative cooling, air circulation fans, manual gear units for roll-up curtains, shade and insect nets, gutters, doors and the clamps and couplers that hold it all. This page sorts them by what Pauni's climate asks for first.
- Pad cooling
- Works: ~32°C inside
- Humid months
- 4
- Shading need
- High
- Delivery
- ~4 days

Equipment priorities for Pauni
| Need | For Pauni | Why |
|---|---|---|
| Cooling | Exhaust fans + cellulose pads | Pads bring 44°C to ~32°C in May |
| Air movement | Air circulation fans | Humid from July to October |
| Shading | Aluminium or double-layer net | Sun peaks at 7 kWh/m² in May |
| Rain | Wide gutters, funnels, skirting apron | July: ~361 mm |
| Nights | No extra need | — |
Cooling and air movement
Dry May air lets wet pads cool 44°C down to about 32°C.
Local market prices for polyhouse crops near Pauni
Prices at the mandis in Bhandara district follow a clear yearly pattern. Green peas is the extreme case, from ₹3,202 per quintal in July up to ₹4,209 in December (31% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Green peas | 7 | ₹3,538/q | Dec · ₹4,209 | Jul · ₹3,202 | 31% |
When to plant in Pauni for the best prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, green peas peaks in December; at about 60 days to first harvest, transplant in October.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Green peas | Dec | ~60 | October | Jul |
Pauni month by month
May is the hottest month, with afternoons around 44.1°C; December nights drop to about 11.7°C. July is the wettest (361 mm of 1,234 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 29.1°C | 11.9°C | 43% | 15 mm | 4.6 | 1.6 |
| Feb | 33.2°C | 15.6°C | 35% | 10 mm | 5.4 | 1.8 |
| Mar | 37.6°C | 20.3°C | 29% | 20 mm | 6.1 | 1.8 |
| Apr | 42.1°C | 25.5°C | 23% | 13 mm | 6.9 | 2 |
| May | 44.1°C | 29.3°C | 25% | 21 mm | 7 | 2.8 |
| Jun | 37°C | 27°C | 58% | 223 mm | 5.3 | 3.1 |
| Jul | 30.6°C | 23.9°C | 82% | 361 mm | 3.9 | 3 |
| Aug | 29.4°C | 23.4°C | 87% | 310 mm | 3.9 | 2.6 |
| Sep | 30°C | 22.8°C | 85% | 200 mm | 4.8 | 1.8 |
| Oct | 29.7°C | 19.3°C | 76% | 48 mm | 5.2 | 1.4 |
| Nov | 28.8°C | 14.9°C | 68% | 10 mm | 4.8 | 1.3 |
| Dec | 28.2°C | 11.7°C | 56% | 3 mm | 4.4 | 1.4 |
Film and shade nets
44°C highs and 7 kWh/m² of sun: shade and reflective nets matter here.

Polyfilm White Diffused 250 Micron (4.5 m)
₹254 per metre + GST
Used in: NVPH, Fan & Pad

White Shade Net 50%
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Aluminium Shade Net (4 m)
₹315 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse (optional upgrade)

Green Shade Net 50%
₹27 per metre + GST
Used in: Square Nethouse, Curved Nethouse (optional upgrade)
Ventilation and insect control
Roll-up curtains and insect net let a naturally ventilated house breathe without letting pests in.
Gutters and rain handling
July brings about 361 mm; gutters and skirting must carry it away.
Doors and entry
Heavy rain and humidity: aluminium doors do not swell or warp.
Frame fittings
Clamps, couplers and springs hold the frame and film; we count every one for your size.

Clamps 60 mm Full
₹17 per piece + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Four Way Pipe Coupler (48 OD)
₹130 per piece + GST
Used in: Square Nethouse

Aluminium Profile
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

GI Spring
₹6 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse
Fan and pad cooling in Pauni
Pad cooling works by evaporation, so it needs dry air. In May Pauni averages 44°C at 25% humidity, which pads can bring down to roughly 32°C inside. That is enough for leafy greens and nursery crops through summer.
- Fan & pad house, 52 × 76 m
- 3,952 m²
- Exhaust fans
- 12 nos
- Cellulose pads
- 82 nos
- Material incl. GST
- ₹32,48,775
When to service equipment in Pauni
- 1
Before May
Wash or replace cellulose pads, clean the pad gutter and filter, and check every exhaust fan belt and shutter before the 44°C peak.
- 2
Before July
Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 361 mm.
- 3
July to October
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 4
October to February
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Which equipment each system uses
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Tested, certified and under warranty

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Pauni.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Delivery and spares in Pauni
Pauni is roughly 880 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Pauni in about 4 days, carrying the invoice, the test reports and 100% invoice insurance.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Across Bhandara district
Among the 130 towns we supply in Maharashtra, Pauni ranks 6th for summer heat and 32nd for yearly rain. Other Bhandara district towns on our list:
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Do you supply polyhouse equipment in Pauni?
Yes. We dispatch from our Satara factory, about 880 km from Pauni, and the truck usually arrives in about 4 days.
Does fan and pad cooling work in Pauni?
Yes. In May the air is dry enough (25%) for pads to bring 44°C down to about 32°C.
What warranty do you give?
GI structure 15 years, polyfilm 2.5 years, nets 3 years.
Can I get lab test reports?
Yes. Tensile, chemical analysis, salt spray, cupping and pull-out tests by third-party labs can be added to any order; reports come with the delivery.
Do you install the equipment?
We supply material and equipment. Kryzen Biotech’s construction team can build the structure; see polyhouse construction in your town on the Kryzen blog.
What equipment does a naturally ventilated polyhouse need?
Roll-up side curtains with manual gear units, side insect net, roof film with aluminium profiles and springs, gutters, doors and an optional entry cabin. Air circulation fans and shade net are optional upgrades.
Equipment supply near Pauni
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Pauni | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Umred | ~40 km | Works (~32°C) | 4 | May, 44°C |
| Equipment supplier in Nagpur | ~90 km | Works (~32°C) | 4 | May, 44°C |
| Equipment supplier in Tumsar | ~90 km | Works (~31°C) | 4 | May, 44°C |
| Equipment supplier in Mul | ~100 km | Works (~32°C) | 4 | May, 44°C |
| Equipment supplier in Ramtek | ~100 km | Works (~31°C) | 4 | May, 43°C |
| Equipment supplier in Tirora | ~100 km | Works (~31°C) | 4 | May, 44°C |











