Equipment · West Bengal
Protected Cultivation Equipment Supplier in Habra
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
The frame and film make a polyhouse; the equipment makes it work. For growers in Habra we supply every piece from one factory: air circulation fans, manual gear units for roll-up curtains, shade and insect nets, gutters, doors and the clamps and couplers that hold it all. This page sorts them by what Habra's climate asks for first.
- Pad cooling
- Limited here
- Humid months
- 6
- Shading need
- High
- Delivery
- ~7 days

What Habra's climate asks of the equipment
| Need | For Habra | Why |
|---|---|---|
| Cooling | Shade net + open curtains | 56% humidity limits pad cooling |
| Air movement | Air circulation fans | Humid from June to November |
| Shading | Aluminium or double-layer net | Sun peaks at 5.9 kWh/m² in April |
| Rain | Wide gutters, funnels, skirting apron | July: ~342 mm |
| Nights | No extra need | — |
Ventilation and insect control
Roll-up curtains and insect net let a naturally ventilated house breathe without letting pests in.
Local market prices for polyhouse crops near Habra
We averaged two years of daily Agmarknet prices from 12 markets in nearby districts (Hooghly, Howrah, Nadia) for crops that are grown under cover. Tomato swings the most: about ₹4,185 per quintal in December against ₹817 in March, a 412% difference. Bitter gourd is the steadiest, which makes it a safer second crop.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Brinjal | 26 | ₹4,164/q | Jul · ₹5,717 | Jan · ₹2,144 | 167% |
| Green chilli | 20 | ₹5,574/q | Aug · ₹7,202 | Dec · ₹4,350 | 66% |
| Tomato | 20 | ₹2,914/q | Dec · ₹4,185 | Mar · ₹817 | 412% |
| Okra (bhindi) | 18 | ₹3,744/q | Jan · ₹5,197 | May · ₹1,843 | 182% |
| Bitter gourd | 17 | ₹3,688/q | Aug · ₹4,400 | Mar · ₹2,888 | 52% |
| Ridge gourd | 17 | ₹3,719/q | Feb · ₹5,197 | Jun · ₹2,459 | 111% |
| Cabbage | 11 | ₹2,146/q | Oct · ₹3,579 | Mar · ₹962 | 272% |
| Cucumber | 3 | ₹4,118/q | Jan · ₹5,390 | May · ₹2,900 | 86% |
When to plant in Habra for the best prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, brinjal peaks in July; at about 60 days to first harvest, transplant in May.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Brinjal | Jul, Aug | ~60 | May | Jan |
| Green chilli | Jul, Aug | ~75 | May | Dec |
| Tomato | Aug, Nov, Dec | ~75 | September | Mar |
| Okra (bhindi) | Jan, Feb, Dec | ~45 | November | May |
| Bitter gourd | Jul, Aug, Sep, Oct | ~55 | June | Mar |
| Ridge gourd | Jan, Feb | ~50 | December | Jun |
| Cabbage | Oct, Nov | ~75 | July | Mar |
| Cucumber | Jan, Jul, Aug | ~40 | November | May |
Habra month by month
April is the hottest month, with afternoons around 38.7°C; January nights drop to about 10°C. July is the wettest (342 mm of 1,593 mm a year), and humidity stays at 75% or more for 6 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Feb, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 25°C | 10°C | 60% | 11 mm | 3.8 | 1.6 |
| Feb | 30.2°C | 14.3°C | 51% | 19 mm | 4.7 | 1.7 |
| Mar | 35.6°C | 19.5°C | 48% | 32 mm | 5.4 | 1.9 |
| Apr | 38.7°C | 24.1°C | 56% | 59 mm | 5.9 | 2.6 |
| May | 37°C | 26°C | 67% | 165 mm | 5.8 | 2.6 |
| Jun | 33.1°C | 26.3°C | 81% | 244 mm | 4.6 | 2.7 |
| Jul | 31.2°C | 25.9°C | 88% | 342 mm | 4.2 | 2.8 |
| Aug | 30.9°C | 25.6°C | 89% | 301 mm | 4.2 | 2.3 |
| Sep | 30.4°C | 25°C | 89% | 238 mm | 4.4 | 1.8 |
| Oct | 29.7°C | 22.2°C | 84% | 148 mm | 4.4 | 1.4 |
| Nov | 27.4°C | 16.5°C | 78% | 23 mm | 4.1 | 1.3 |
| Dec | 24.6°C | 11.4°C | 72% | 11 mm | 3.6 | 1.5 |
Cooling and air movement
6 humid months: moving air dries leaves and cuts disease.
Gutters and rain handling
July brings about 342 mm; gutters and skirting must carry it away.
Film and shade nets
39°C highs and 5.9 kWh/m² of sun: shade and reflective nets matter here.

Polyfilm White Diffused 250 Micron (4.5 m)
₹254 per metre + GST
Used in: NVPH, Fan & Pad

White Shade Net 50%
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Aluminium Shade Net (4 m)
₹315 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse (optional upgrade)

Green Shade Net 50%
₹27 per metre + GST
Used in: Square Nethouse, Curved Nethouse (optional upgrade)
Doors and entry
Heavy rain and humidity: aluminium doors do not swell or warp.
Frame fittings
Clamps, couplers and springs hold the frame and film; we count every one for your size.

Clamps 60 mm Full
₹17 per piece + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

Four Way Pipe Coupler (48 OD)
₹130 per piece + GST
Used in: Square Nethouse

Aluminium Profile
₹27 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse

GI Spring
₹6 per metre + GST
Used in: NVPH, Fan & Pad, Square Nethouse, Curved Nethouse
Why we rarely fit fan and pad in Habra
At 56% humidity in April, wet pads would cool Habra's air only a few degrees, so we rarely recommend fan and pad here. Better value: open roll-up curtains, aluminium or double-layer shade net, and air circulation fans in the humid months.
An equipment care calendar for Habra
- 1
Before July
Clear gutters and funnels, re-seat the side skirting apron and check film tension; July brings about 342 mm.
- 2
June to November
Run air circulation fans in the mornings, keep curtain gear units greased and check insect net for tears; humid air brings fungal disease and pests.
- 3
November to February
Tighten clamps and bolts, check GI springs in the aluminium profiles, and order replacement film or net before the next season.
Which equipment each system uses
| Equipment | NVPH | Fan & pad | Square NH | Curved NH |
|---|---|---|---|---|
| Exhaust Fan | — | ✓ | — | — |
| Cellulose Pad (600X150X1800) | — | ✓ | — | — |
| Manual Gear Roll Up Curtain Unit | ✓ | — | — | — |
| Side Insect Net (5.2 m) | ✓ | — | ✓ | — |
| White Shade Net 50% | ✓ | ✓ | ✓ | Optional |
| Polyfilm White Diffused 250 Micron (4.5 m) | ✓ | ✓ | — | — |
| GI Gutter Sheet | ✓ | ✓ | — | — |
| Air Circulation Fan | Optional | Optional | — | — |
Tested, certified and under warranty

Tensile test
Strength of the GI pipe steel, by a third-party lab.

Salt spray test
Corrosion resistance; worth it in humid Habra.

Chemical analysis
Spectrometer check of the steel composition.
| Part | Warranty |
|---|---|
| GI structure | 15 years |
| Polyfilm | 2.5 years |
| Shade and insect nets | 3 years |
Delivery and spares in Habra
Habra is roughly 2,110 km by road from our factory at Degaon, Satara. Once the order is packed, a truck usually reaches Habra in about 7 days, carrying the invoice, the test reports and 100% invoice insurance.
Need only a few items?
Every fan, pad, net and fitting is sold on its own at the weekly rate, for repairs and extensions.
Habra within West Bengal
Habra is one of the hotter towns in West Bengal (12th of 58 we cover), and among the wettest (13th for rain). These are the larger towns we supply elsewhere in West Bengal.
- Equipment supplier in Kolkata
- Equipment supplier in Howrah
- Equipment supplier in Durgapur
- Equipment supplier in Siliguri
- Equipment supplier in Asansol
- Equipment supplier in Bhatpara
- Equipment supplier in Maheshtala
- Equipment supplier in Rajpur Sonarpur
- Equipment supplier in Panihati
- Equipment supplier in Kamarhati
- Equipment supplier in Bardhaman
- Equipment supplier in Barasat
Buy from India's biggest CEA manufacturing company
Choose your structure and size and get the complete material list, priced this week.
FAQs
Do you supply polyhouse equipment in Habra?
Yes. We dispatch from our Satara factory, about 2,110 km from Habra, and the truck usually arrives in about 7 days.
Does fan and pad cooling work in Habra?
Not well. At 56% humidity in April, pads cool only a little; a naturally ventilated house with shading and air circulation fans is better value.
Are the exhaust fans and pads sold separately?
Yes. Exhaust fans, cellulose pads and pad frames can be bought individually, for a new fan and pad house or to replace old pads.
What warranty do you give?
GI structure 15 years, polyfilm 2.5 years, nets 3 years.
Can I get lab test reports?
Yes. Tensile, chemical analysis, salt spray, cupping and pull-out tests by third-party labs can be added to any order; reports come with the delivery.
Do you install the equipment?
We supply material and equipment. Kryzen Biotech’s construction team can build the structure; see polyhouse construction in your town on the Kryzen blog.
Equipment supply near Habra
Nearby towns on the same route, and whether pad cooling works there.
| Town | From Habra | Pad cooling | Humid months | Hottest month |
|---|---|---|---|---|
| Equipment supplier in Barasat | ~30 km | Limited | 6 | Apr, 38°C |
| Equipment supplier in Bhatpara | ~30 km | Limited | 6 | Apr, 39°C |
| Equipment supplier in Naihati | ~30 km | Limited | 6 | Apr, 39°C |
| Equipment supplier in Hooghly-Chinsurah | ~40 km | Limited | 6 | Apr, 39°C |
| Equipment supplier in Kamarhati | ~40 km | Limited | 6 | Apr, 38°C |
| Equipment supplier in Madhyamgram | ~40 km | Limited | 6 | Apr, 38°C |












