Polyhouse material · Medak district, Telangana
Polyhouse Material Supplier in Medak
By Editorial Team, Kryzen Biotech · Updated 12 November 2026
Looking for a polyhouse material supplier in Medak? We make and ship the full bill of materials for naturally ventilated polyhouses, fan and pad polyhouses and nethouses. Material for Medak travels about 590 km by road and typically arrives in about 3 days after dispatch.
- Distance from factory
- ~590 km by road
- Delivery after dispatch
- ~3 days
- Hottest month
- May, ~40°C
- Climate pick
- NVPH + fan & pad
Polyhouse systems we supply in Medak
Each kit comes with the full GI structure, covering and fittings. Here is how each one suits Medak's climate.

Naturally ventilated polyhouse
Best fitFilm roof keeps July–October rain off the crop; roof vents and roll-up curtains move air without power. The usual first choice in Medak.

Fan & pad polyhouse
Good fitExhaust fans pull air through wet pads. In May that can take a 40°C afternoon down to about 30°C inside, cool enough for leafy greens.

Square nethouse
SeasonalFlat-roof 4 × 4 m grid with shade and insect net, the NHB nursery design. Best from October to February, when rain is low.

Curved nethouse
SeasonalArched GI frame covered in shade net: taller crops, more air and a lower cost than a polyhouse. Shading pays off when sunlight peaks in May.
Plants you can grow in Medak
Picked for Medak's weather: May highs of about 40°C and 846 mm of rain a year.

Coloured capsicum
NVPH
Grow under shade net through May, when highs reach 40°C.

Cucumber (parthenocarpic)
NVPH
Fast 3–4 month crop; drip irrigation keeps it going in dry spells.

Lettuce and leafy greens
Fan & pad polyhouse
Pads bring May afternoons down to about 30°C, so greens can grow through summer.

Gerbera and rose
NVPH
Cut flowers with year-round demand from city florists and events.
🌱 Vegetable seedlings
Square nethouse
Raise nursery seedlings from October to February for the local planting season.
Polyhouse Construction vs a local fabricator in Medak
| What you get | Polyhouse Construction | Typical local fabricator |
|---|---|---|
| Experience | ✓30 years of collective experience in greenhouse engineering | Often a small crew learning on the job |
| Technical know-how | ✓Strong technical understanding: structure planned for your climate and crop | Usually repeats one standard design |
| Warranty | ✓15-year manufacturing warranty | Rarely a written warranty |
| Engineering | ✓In-house engineering team | No design or load checks |
| Manufacturing | ✓In-house manufacturing, cut and drilled to drawing | Buys pipes from traders, cuts on site |
| Quality checks | ✓32-point QA checklist for every part | Visual check at best |
| Lab certificate | ✓Lab test certificate with every dispatch | Not provided |
| Technical sheet | ✓Technical data sheet for every product | Not available |
| Material match | ✓Zero material mismatch: every part counted per design | Short or excess material is common |
| Raw material | ✓Branded steel from Tata, Jindal and JSW | Unbranded or mixed sources |
| Price | ✓Lowest cost across India, with real-time price benefits from weekly rates | Fixed quote; rate drops are not passed on |
| Backing | ✓Backed by industry leader Kryzen Biotech | Single-owner workshop |
Medak's growing year at a glance
Plan film, shading and planting around these months. Open-mesh nethouses work best from October to February; keep curtains and vents ready for the humid stretch from July to October.
| Month | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | Detail |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Peak heat | ~40°C highs | ||||||||||||
| Strongest sun | 6.8 kWh/m²/day | ||||||||||||
| Wettest month | ~204 mm | ||||||||||||
| Humid (75%+) | July–October | ||||||||||||
| Nethouse season | October–February |
From NASA POWER monthly averages for Medak.
Choosing polyhouse material for Medak's weather
For Medak, the numbers that shape the material list are May afternoons of about 40°C (34% humidity), roughly 846 mm of rain a year with August the wettest month.
| Part | What we supply | Why in Medak |
|---|---|---|
| Roof film | 250-micron white diffused polyfilm | Sunlight peaks in May at about 6.8 kWh per m² a day; diffused film spreads it and cuts leaf scorch. |
| Shading | Aluminium (reflective) shade net | 40°C highs and strong sun: a reflective net sends heat back out instead of holding it inside. |
| Gutters | GI gutter sheet with funnels | About 846 mm of rain a year, so standard gutters are enough. |
| Ventilation | Roll-up side curtains, side insect net | Humid spell from July to October; open the curtains fully in those months. |
What protected crops fetch at mandis near Medak
Prices at the mandis in Medak district follow a clear yearly pattern. Cucumber is the extreme case, from ₹403 per quintal in November up to ₹1,599 in June (297% more). That gap is what protected cultivation lets you aim for: a crop timed to the expensive months.
| Crop | Markets | Average | Highest month | Lowest month | Swing |
|---|---|---|---|---|---|
| Okra (bhindi) | 5 | ₹2,125/q | Jun · ₹2,668 | Dec · ₹1,580 | 69% |
| Brinjal | 5 | ₹1,433/q | Jun · ₹1,856 | Mar · ₹737 | 152% |
| Bitter gourd | 5 | ₹2,187/q | Jun · ₹3,338 | Dec · ₹1,485 | 125% |
| Green chilli | 5 | ₹2,177/q | Jun · ₹3,011 | Mar · ₹1,397 | 116% |
| Cucumber | 4 | ₹885/q | Jun · ₹1,599 | Nov · ₹403 | 297% |
| Cabbage | 5 | ₹1,002/q | Jun · ₹1,848 | Apr · ₹624 | 196% |
| Bottle gourd | 4 | ₹664/q | Jun · ₹904 | Dec · ₹558 | 62% |
| Ridge gourd | 2 | ₹2,482/q | Jan · ₹3,009 | May · ₹2,053 | 47% |
When to plant in Medak for the best prices
Working back from the month each crop sells highest locally, with typical days from transplanting to first harvest under cover. For example, okra (bhindi) peaks in June; at about 45 days to first harvest, transplant in April.
| Crop | Sells best | Days to first harvest | Transplant / sow in | Avoid harvesting in |
|---|---|---|---|---|
| Okra (bhindi) | Jun, Jul | ~45 | April | Dec |
| Brinjal | May, Jun, Jul, Oct, Nov | ~60 | April | Mar |
| Bitter gourd | Jun | ~55 | April | Dec |
| Green chilli | May, Jun | ~75 | March | Mar |
| Cucumber | Jun | ~40 | April | Nov |
| Cabbage | Jun | ~75 | March | Apr |
| Bottle gourd | Jun | ~55 | April | Dec |
| Ridge gourd | Jan, Jul | ~50 | November | May |
Twelve months of weather in Medak
May is the hottest month, with afternoons around 40.4°C; December nights drop to about 13.7°C. August is the wettest (204 mm of 846 mm a year), and humidity stays at 75% or more for 4 months. The mildest growing months, with afternoons of 20–32°C and little rain, are Jan, Oct, Nov, Dec.
| Month | Afternoon high | Night low | Humidity | Rain | Sun (kWh/m²/day) | Wind (m/s) |
|---|---|---|---|---|---|---|
| Jan | 29.8°C | 14.2°C | 46% | 8 mm | 4.8 | 2 |
| Feb | 33.5°C | 17.2°C | 37% | 6 mm | 5.7 | 2.2 |
| Mar | 37.1°C | 21.1°C | 32% | 20 mm | 6.2 | 2.2 |
| Apr | 39.6°C | 24.9°C | 33% | 23 mm | 6.8 | 2.2 |
| May | 40.4°C | 27.1°C | 34% | 26 mm | 6.8 | 3.1 |
| Jun | 33.8°C | 24.2°C | 62% | 116 mm | 5.4 | 4 |
| Jul | 30.5°C | 22.3°C | 75% | 190 mm | 4.5 | 4.1 |
| Aug | 29°C | 21.7°C | 82% | 204 mm | 4.4 | 3.4 |
| Sep | 28.8°C | 21.4°C | 84% | 158 mm | 4.9 | 2.3 |
| Oct | 28.8°C | 19.2°C | 77% | 81 mm | 5.1 | 1.8 |
| Nov | 28.4°C | 15.9°C | 69% | 12 mm | 4.9 | 1.8 |
| Dec | 28.3°C | 13.7°C | 57% | 2 mm | 4.6 | 1.8 |
Polyhouse subsidy for Medak farmers
Under the Mission for Integrated Development of Horticulture (MIDH), farmers in Telangana can get 50% of the government cost norm for naturally ventilated polyhouses (₹1,000–1,200 per m²), fan and pad polyhouses (₹1,500–1,800 per m²) and nethouses (₹710 per m²), on up to 2,500 m² per farmer. The subsidy is worked out on the government cost norm for your structure and size, not on your bill.
Commercial projects above 2,500 m² can apply to the National Horticulture Board for a credit-linked subsidy of 50% of the eligible project cost, up to ₹100 lakh per project. Both schemes want materials that meet BIS standards: our GI pipes carry the ISI mark and test reports ship with every order. Apply through the Telangana horticulture department or your district horticulture officer before you buy.
Delivery to Medak
Medak is about 590 km by road from our factory at Degaon, Satara, on the Pune–Bangalore highway. Once your order is packed, the truck usually reaches Medak in about 3 days, with the invoice and test reports.
Every load travels with 100% invoice insurance. Send your delivery PIN code with the order and we confirm the vehicle before dispatch.
Get polyhouse material from India's biggest CEA manufacturing company
Choose your structure and size, and get the complete material list in a minute.
FAQs
Do you deliver polyhouse material to Medak?
Yes. We dispatch from our factory at Degaon, Satara, about 590 km from Medak by road, and the truck usually arrives in about 3 days. Every load is insured for the invoice value.
Which polyhouse suits Medak?
A naturally ventilated polyhouse for vine crops, and fan and pad cooling if you grow greens through May: the air is dry enough for pads to bring 40°C down to about 30°C.
Can I buy only a few items, like film or nets?
Yes. Use Buy individual items to order film, nets, fittings or pipes on their own, for repairs or an extension.
Can you also build the polyhouse in Medak?
Yes. Kryzen Biotech's construction team builds polyhouses and nethouses across India, including Telangana. See the link to polyhouse construction in Medak below.
What can I grow in a polyhouse in Medak?
coloured capsicum, cucumber (parthenocarpic), lettuce and leafy greens, gerbera and rose, among others. The right crop depends on your market, water and the season you plant.
Is there a subsidy for polyhouse material in Telangana?
Yes. NHM / MIDH pays 50% of the cost norm on up to 2,500 m² per farmer, and NHB gives a 50% credit-linked subsidy for projects above 2,500 m². Apply before buying; we provide the quotation, ISI-marked material and test reports the claim needs.
Polyhouse material near Medak
Supplying a farm outside Medak? These nearby towns, with their own weather, are on the same delivery route.
| Town | From Medak | Hottest month | Rain a year | Suits |
|---|---|---|---|---|
| Polyhouse material in Kamareddy | ~40 km | May, 42°C | 853 mm | NVPH + fan & pad |
| Polyhouse material in Sadasivpet | ~70 km | May, 40°C | 815 mm | NVPH + fan & pad |
| Polyhouse material in Sangareddy | ~70 km | May, 40°C | 815 mm | NVPH + fan & pad |
| Polyhouse material in Siddipet | ~80 km | May, 41°C | 850 mm | NVPH + fan & pad |
| Polyhouse material in Nizamabad | ~90 km | May, 42°C | 853 mm | NVPH + fan & pad |
| Polyhouse material in Secunderabad | ~90 km | May, 40°C | 807 mm | NVPH + fan & pad |
Want it built as well? Read about polyhouse construction in Medak on the Kryzen blog.
